Jump to content

  • facebook
  • twitter

Photo

00533 - Idle Speed Regulation 09-10 - Adaptation Limit Surpassed...please help


  • Please log in to reply
9 replies to this topic

#1 grendal10

grendal10

  • 10 posts
  • Joined 13-February 14
  • Location:wales
  • Drives:1.4 8v polo

Posted 16 March 2014 - 05:28 PM

i keep getting

 00533 - Idle Speed Regulation
09-10 - Adaptation Limit Surpassed 

on vagcom, the engine is aex 1.4 8v. one minute the car runs fine then next either runs on 2 cylinders or wont even cough, it seems very random. 00533 is the only fault code i get. I've changed nearly all the sensors and throttle body, I've also done the basic settings adaption. can anyone help. I'm really out of ideas now



#2 nige8021

nige8021

    nige8021


  • 6,187 posts
  • Joined 01-August 10
  • Location:milton keynes
  • Gender:Male
  • Drives:Seat Ibiza 1.4 Cool/S

Posted 16 March 2014 - 05:33 PM

Here's the fault finding for that code

 

Attached File  AEX Fault code 0533.jpg   122.67KB   2 downloads



#3 grendal10

grendal10
  • Topic Starter

  • 10 posts
  • Joined 13-February 14
  • Location:wales
  • Drives:1.4 8v polo

Posted 16 March 2014 - 05:55 PM

thanks for the info, it shows adaptation limit exceeded and reached but not surpassed are they all basically the same,  would 00533 cause the car not to start? or run on only 2 cylinders?



#4 nige8021

nige8021

    nige8021


  • 6,187 posts
  • Joined 01-August 10
  • Location:milton keynes
  • Gender:Male
  • Drives:Seat Ibiza 1.4 Cool/S

Posted 16 March 2014 - 06:11 PM

Surpassed is the same as exceded, but that code would not cause it to run only on two cylinders, I'd be looking more at the ignition side of things, distrubutor cap, leads, plugs etc or could even be the hall sensor in the distributor.



#5 grendal10

grendal10
  • Topic Starter

  • 10 posts
  • Joined 13-February 14
  • Location:wales
  • Drives:1.4 8v polo

Posted 16 March 2014 - 06:45 PM

I've replaced the leads,distributor and rotor arm. I've also got another hall sensor. the ignition timing seems to be off is their any way i can get it back on track, currently the the car coughs if i put the distributor full lock one way. I've checked the leads are on correctly 



#6 nige8021

nige8021

    nige8021


  • 6,187 posts
  • Joined 01-August 10
  • Location:milton keynes
  • Gender:Male
  • Drives:Seat Ibiza 1.4 Cool/S

Posted 16 March 2014 - 07:05 PM

Have a look at this http://www.clubpolo....topic=330460= I've put the correct method of setting the timing up



#7 grendal10

grendal10
  • Topic Starter

  • 10 posts
  • Joined 13-February 14
  • Location:wales
  • Drives:1.4 8v polo

Posted 16 March 2014 - 07:38 PM

is it possible to do it with a vagcom cable?



#8 nige8021

nige8021

    nige8021


  • 6,187 posts
  • Joined 01-August 10
  • Location:milton keynes
  • Gender:Male
  • Drives:Seat Ibiza 1.4 Cool/S

Posted 16 March 2014 - 08:30 PM

You might need the full licenced version of vagcom/VCDS as the unlicenced version has limited functions



#9 grendal10

grendal10
  • Topic Starter

  • 10 posts
  • Joined 13-February 14
  • Location:wales
  • Drives:1.4 8v polo

Posted 16 March 2014 - 09:05 PM

i have the full version, only thing i dont have is the pin number for the ecu



#10 nige8021

nige8021

    nige8021


  • 6,187 posts
  • Joined 01-August 10
  • Location:milton keynes
  • Gender:Male
  • Drives:Seat Ibiza 1.4 Cool/S

Posted 16 March 2014 - 09:11 PM

You don't need any pin number just go to the basic settings box






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Club Polo and the Club Polo website are in no way affiliated with or endorsed by Volkswagen AG or any of it's worldwide subsidiaries or associates.
Copyright © Club Polo 2013