Fahvergnugen Tuning
I specialise in re-mapped performance chips for standard and modified Polo's, with very noticable performance improvements. Fahrvergnugen chips run in everything from stock 1.0l to rallye and drag race cars. I mainly focus on the cars the bigger tuning companies ignore or charge 10 x the amount to even consider looking at!
My standard generic chips do not effect your cars original reliability and mapped to ensure optimum performance without risking excessive stress on your engine.
If you have any questions I am always happy to help.
International orders welcome, I offer very resonable postage rates.
If your car model is not listed below please PM me, or start a new topic. On NA cars typical power gains are between 3-10% depending on engines level of tune. In many applications when driving steady you will notice an improvement in fuel consumption, obviously when driven hard fuel consumption will increase.
Product Range
VW Polo 86c MK3 1991 to 1994 Coupe/Squareback/Derby
Models: L,CL, Fox, and other limited editions Coupe/Squareback/Derby
Engine code: AAU
Description: 1043cc, Single-point injection,
ECU No: 030 906 026 A, 030 906 026 H requires soldering (suitable for other variations)
Performance: 2-3bhp and 5Nm torque
Eprom: 28pin DIP 27c256
Notes: DIY installed in less than 30min, Soldering may be required.
Price: £35+£2 P&P including fitting instructions & storage box
Models: L,CL, and other limited editions Coupe/Squareback/Derby
Engine code: AAV
Description: 1272cc, Single-point injection, Round air filter
ECU No: 030 906 026 b, (suitable for other variations)
Performance: 3-5bhp and 8Nm torque
Eprom: 28pin DIP 27c256
Notes: DIY installed in less than 30min, Soldering may be required.
Price: £35+£2 P&P including fitting instructions & storage box
Models: L,CL, and other limited editions Coupe/Derby
Engine code: NZ ( Vacumn advance distributor)
ECU No: 030 906 021J (Late)
Description: 1272cc, Multi-point injection,
Performance: 2-4bhp and 8Nm torque
Eprom: 2 versions 28pin 2764 (late) 24pin 2732 (early)
Notes: DIY installed in less than 30min, Soldering may be required.
Price: £45(late)/ £50(early)+£2 P&P including fitting instructions & storage box
Models: GT Coupe & Hatchback
Engine code: 3F
Description: 1272cc, Multi-point injection,
ECU No: 030 906 022 N, 030 906 022 K (suitable for other variations)
Performance: 4-6bhp and 10Nm torque
Eprom: 28pin DIP 27c256
Notes: DIY installed in less than 30min, Soldering may be required on late 93/94 cars
Price: £35+£2 P&P including fitting instructions & storage box
EXTRAS: £45+ £2p&p for a increased rev limiter chip, 7300rpm, 8000rpm others on request (stock is 6800rpm)
Models: G40 Coupe & Hatchback
Engine code: PY
Description: 1272cc, Multi-point injection, Supercharged
ECU No: 030 906 022 C, (suitable for other variations)
Performance: 5-8bhp and 10Nm torque
Eprom: 28pin DIP 27c256
Notes: DIY installed in less than 30min, Soldering may be required on late 93/94 cars
Price: £35+£2 P&P including fitting instructions & storage box
EXTRAS: Free raised rev limiter stock, 7300rpm or 8000rpm, 65mm Smaller pulleys are available for £60
If required DIP 28 sockets for late 93/94 cars can be professinally fitted for £30+ £5.20 special delievery return ECU postage. £2 extra for deluxe socket easy eprom removal.
VW Polo MK4 6N
Models: L, CL, Hatchback
Engine code: -
Description: 1.4 Available soon...
ECU No: -
Performance: 3-4bhp and 6Nm torque
Eprom: 32pin PLCC 27c512
Notes: Professinal installation required.
Price: £150+£6.00 P&P including eprom, socket and all soldering work ECU needed for 2-3days
Models: L, CL, GL, GLX Hatchback
Engine code: AEE
Description: 1.6
ECU No: 032 906 030 D
Performance: 4-6bhp and 7Nm torque
Eprom: 32pin PLCC 27c512
Notes: Professinal installation required.
Price: £100+£6.00 P&P including eprom, socket and all soldering work ECU needed for 2-3days
Models: 16v Hatchback
Engine code: [b]AFH
Description: 1.4 16v, Multi-point injection,
ECU No: 030 906 030 D, 030 906 030 E
Performance: 4-6bhp and 9Nm torque, significant reduction in mid range power drop.
Eprom: 32pin PLCC 27c512
Notes: Professinal installation required.
Price: £150+£6.00 P&P including eprom, socket and all soldering work ECU needed for 2-3days
The improvement in the mid range drop is very noticable on the road and I would strongly recomend my 16v chip for this reason alone.
VW Polo MK5 GTI
Models: L, CL, Hatchback
Engine code: -
Description: 1.4
ECU No: -036 906 033D 5wp4004907 other codes apply
Performance: 7-12bhp and 5-11Nm torque
Eprom: PSOP 29F400
Notes: Professinal installation required.
Price: £250+£6.00 P&P including eprom, socket and all soldering work ECU needed for 2-4days
A gain of around 11.5Bhp, however due to differences in vehicles expect around 6-8bhp. The graphs also show a max increase of 14Nm or torque, again this may be less in some applications, taking peak torque above a stock G40! (150Nm) to 159Nm.
VW Golf/Vento MK3 1992-1996
Model: Golf & Vento 08/92 -09/9
Engine code: ABU
Description: 1.6 litre, Monomotronic single point injection
VAG ECU: 032 906 026 E, *may be replaced by 032 906 026 G or 032 997 026 AX
Performance: 4-6bhp and 7Nm torque
Eprom: 27c256
Notes: Professinal installation required.
Price: £65+£5.20 P&P including eprom, socket and all soldering work ECU needed for 2-3days
All chips are sold with the option for full refund if you are disapointed with the results.
I am constantly expanding my range of chips for other models.
For more information please post a new topic with vehicle model and engine details in the topic. I can supply remapped chips for most popular european cars not just VAG.
I will require engine CC and ECU numbers, to check compatability.
Paypal payment preferred.
