Jump to content
Notice to Hotmail/Gmail & BT Internet users - Please check your SPAM/JUNK folders for our emails. Please add our email as a contact to your email account.
littler52

Silver projects camber adjusters

Recommended Posts

littler52

Evening all.

Is there anyone on here using the silver projects front strut top camber adjusters that are currently on ebay on there 2/2f,

i'm completely replacing the suspension on my 2f breadvan to coilovers,poly bushed throughout etc...so i'm going to need something to correct the front camber once lowered are these any good,do they work etc...any input would be appreciated 

Share this post


Link to post
Share on other sites
kwijibo_coupe

As far as I can tell, lowering these doesn't mess with the front camber angle much if at all. The castor angle is effected and the ARB blocks are used to correct that. 

As for these top mounts, I have a set of the MAX RPM ones which are pretty much the same idea. I personally wouldn't recommend them especially if you're going down the coilover and polybush route which will make everything a lot more solid than it used to be. The standard top mounts will at least keep a bit of cushioning between the suspension and the shell.  

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
littler52

Cheers for the quick reply,

I'll leave these and check on the castor angle when all is fitted. And take it from there, 

Share this post


Link to post
Share on other sites
PHIL SWARBRICK

I am going to fit these camber adjusters. They came with no instructions so I will have to figure it out for myself. Being that it is sometime since your initial post, I would be interested in your experiences and whether it was worthwhile fitting them.

Share this post


Link to post
Share on other sites
littler52
10 hours ago, PHIL SWARBRICK said:

I am going to fit these camber adjusters. They came with no instructions so I will have to figure it out for myself. Being that it is sometime since your initial post, I would be interested in your experiences and whether it was worthwhile fitting them.

I didn't fit the camber adjusters, just the coilovers, poly bushed the lower arms and fitted the castor correction arb blocks. just my opinion but I don't think they are an absolute must, my bready drives and handles like a go kart, I also fabricated/fitted a lower strut brace 

Share this post


Link to post
Share on other sites
PHIL SWARBRICK

I am going to see how easy the camber adjusters are to fit. My bready handled well when the stock engine was in it with 15” Mini wheels and 50 profile tyres so with a subframe, top brace and everything polybushed it going to be even better.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use Privacy Policy Guidelines