Jump to content

6N1 Steering wheel removal


Jack jones

Recommended Posts

First Welcome to the forum.

 

The centre cover with the horn push just pulls off, then disconnect the wiring and then undo the large nut a few turns (this is to stop you smacking the wheel into your face in the next step), try pulling the wheel off, when it comes free , completly remove the nut. refitting is the same in reverse and tighten the nut to 50Nm

  • Thanks 1
Link to comment
Share on other sites

Thanks, after asking i tried the 25mm and it is 25mm. I got the steering wheel of and generally looked and cleaned all i could see but the problem is still there. When i push hard on the wheel the horn goes off and sometimes when i turn a córner or even when i start the car, any thoughts? Thanks

Link to comment
Share on other sites

Thanks, after asking i tried the 25mm and it is 25mm. I got the steering wheel of and generally looked and cleaned all i could see but the problem is still there. When i push hard on the wheel the horn goes off and sometimes when i turn a córner or even when i start the car, any thoughts? Thanks

Link to comment
Share on other sites

Thanks Nige, i cant see a way of removing this contact ring from the back of the steering wheel, do I just prise it off? the two spring contact just pull off.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use Privacy Policy Guidelines