Jump to content
Notice to Hotmail/Gmail & BT Internet users - Please check your SPAM/JUNK folders for our emails. Please add our email as a contact to your email account.
mk4mike1.4

MK4 POLO SMOOTH BAY 16V ON CARBS

Recommended Posts

mk4mike1.4

right guys project back on.

i know i haven't posted anything up for ages but its back to it with this project car is off the road and engine is out so the bay is getting a little tlc now hope you like so far.

2nr2ctz.jpg

2eml6yh.jpg

15dtbvp.jpg

2enrblk.jpg

also started polishing my gearbox for the new engine, all will be seen later

29msyn6.jpg

2a6jgnn.jpg

just thought i would send some pics for you lot to see of my polo.

got it from salvage and started fixing it up so here's how its going so far.

2zxzcr7.jpg

wmgnpl.jpg

dz8avl.jpg

2eojz35.jpg

30th2yv.jpg

2937pea.jpg

25evd5l.jpg

2d7ui2v.jpg

nxtjdw.jpg

2h6v7n4.jpg

vqibsh.jpg

331dl3s.jpg

2jfekd1.jpg

15rb71g.jpg

2m84h7d.jpg

new mk5 tailgate

30vm8vp.jpg

29b0tx1.jpg

these are some of my install i'm putting in it

15qw6tf.jpg

14488l2.jpg

5062h3.jpg

8x2bnr.jpg

j80ghu.jpg

msbuow.jpg

2ik4l83.jpg

dmp9pi.jpg

2mc9lig.jpg

33f6ja1.jpg

2j27o1i.jpg

o8e83s.jpg

just some more of my car through the stages

2cf8qd0.jpg

2vskd8p.jpg

jpvexc.jpg

24d4rc1.jpg

m6akl.jpg

35jh2zm.jpg

ka2xw7.jpg

2rc1g5g.jpg

rii0kk.jpg

2wmdif8.jpg

post-12981-1193080221_thumb.jpg

Edited by mk4mike1.4

Share this post


Link to post
Share on other sites
anstey

Your doing well mate, goodluck.

Share this post


Link to post
Share on other sites
DjMaC

Install looks awesome...Realy well made..!

Share this post


Link to post
Share on other sites
mk4mike1.4
Install looks awesome...Realy well made..!

thanks mate taken me ages and still alot to do. the weather is turning now and cold and wet don't mix with a car with no doors and sun roof on lol.

Share this post


Link to post
Share on other sites
mk4mike1.4
Your doing well mate, goodluck.

thanx matey alot of hard work gone into that already only had the car for about 2 months.

Share this post


Link to post
Share on other sites
mk4mike1.4
looks good!

thanx mate i'll post some more up when i've sprayed it.

Edited by mk4mike1.4

Share this post


Link to post
Share on other sites
danny6n

did that 6n2 arse end bolt straight on mate?

Share this post


Link to post
Share on other sites
Guest VW_Technik

Fantastic. Love it when people do these sorta things lol.

U spraying the car yourself?

Share this post


Link to post
Share on other sites
mk4mike1.4
did that 6n2 arse end bolt straight on mate?

yeah its a straight fit but does stick out a bit at the bottom near the bits of body under the lights like the mk 5 lights do but i'm welding a plate there to flush it off.

the lock lines up spot on and works great defo recomend it mk5 arse looks sweet smoothed.

Share this post


Link to post
Share on other sites
mk4mike1.4
Fantastic. Love it when people do these sorta things lol.

U spraying the car yourself?

yeah i'm doing everything apart from the re trimming inside, the car is getting sprayed sky blue just got some more things to do first.

Share this post


Link to post
Share on other sites
volksbretta

puka work fella, good to no you saved its life 8-)

Share this post


Link to post
Share on other sites
xcore

isnt it illegal not to have side repeaters?

Share this post


Link to post
Share on other sites
mk4mike1.4
isnt it illegal not to have side repeaters?

not if you can see your front ones clearly from the side, already asked about that one

Edited by mk4mike1.4

Share this post


Link to post
Share on other sites
mk4mike1.4
puka work fella, good to no you saved its life 8-)

yeah couldn't let it rot away in the scrap yard and for £200 it was a bargin.

to be fare i have put alot of work and money in to it tho but all will be good when its done

Share this post


Link to post
Share on other sites
Guest POLOMON

loks great on the rear panel youve smoothed (removed dent) is the swage line a differant height than the door or is it just my eyes?

best a luck with it, I'm sure its gna be cool when its finished

Share this post


Link to post
Share on other sites
mk4mike1.4
loks great on the rear panel youve smoothed (removed dent) is the swage line a differant height than the door or is it just my eyes?

best a luck with it, I'm sure its gna be cool when its finished

well it was a new door so it had dropped a bit after putting it on but the swage line is a bit high at that end but i'm gunna sort it soon

Share this post


Link to post
Share on other sites
Guest VW_Technik

Ah quality mate.

Good luck with it hope to see it finished soon :)

Share this post


Link to post
Share on other sites
mk4mike1.4
Ah quality mate.

Good luck with it hope to see it finished soon :)

i like your polo was gunna do mine in black but had a change of heart so gunna go for a baby blue/ sky blue now should be getting sprayed in the next two weeks can't wait i just wanna get it back together again need to buy alot more things for it tho but i'll get there i'll keep you updated and i might post some more pix up from when i got it to how it looks now i got loads

Share this post


Link to post
Share on other sites
Guest arris

we use that filler at work, i always make it too pink an it sets like within a minute :D

looks really good, wish i had the time to do something like this..

Share this post


Link to post
Share on other sites
mk4mike1.4
we use that filler at work, i always make it too pink an it sets like within a minute :D

looks really good, wish i had the time to do something like this..

i know what you mean with the filler mate i do it myself, i tend to do it more when weather is a bit cold so it goes off quicker but i hate it when your just in the middle of a skim and it sets it pisses me off, and that yellow ultima stuff is even worse and i hardly put any hardener in it good filler tho if you can work fast with it.

you can make time mate just do it, if you really want to you will make time to do it.

  • Like 1

Share this post


Link to post
Share on other sites
Tomm

I use that filler to, its ace! i always end up mixing it to much and it sets in no time which is a right pain!

What colours it going buddy?

Share this post


Link to post
Share on other sites
mk4mike1.4
I use that filler to, its ace! i always end up mixing it to much and it sets in no time which is a right pain!

What colours it going buddy?

its gunna be baby blue mate

i know i buy a tin of filler and half ends up in the bin and quater of it gets sanded off into dust lol.

Edited by mk4mike1.4

Share this post


Link to post
Share on other sites
mk4mike1.4

just a photo shop should be sumin like this tho, just ignore the wheels, covered what was on it coz they looked poo

sljn6e.jpg

Edited by mk4mike1.4

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use Privacy Policy Guidelines