Search the Community
Showing results for tags 'speed sensor'.
Found 3 results
Eslund posted a topic in Engine, Transmission and ExhaustWell, after one problem comes another.. Got my Polo 6N2 -00 up and running after 6 months of trial and error.. The Cathalytic converter was clogged. Not the first thing one checks.. :) Anyway, went over to the MOT, got a remark that the exhaust was leaking just a bit (where i changed the converter) Used the car for almost a month, before I got around to fixing the exhaust. Was planning on doing some welding, but solved it antother way. However, I removed the battery clamps anyway. After the exhaust was fixed, and the clamps was back on, it was time to start it up.. I thought.. DIdnt really wanna start, was chewing on the starter for about 20-30 seconds before it actually started,, When it did, the oil lamp was flashing, and no reaction from the tacho. Checked oil and oil preassure, and all was good, so drove it from the garage to a friend of mine.. Started it again outside his house, and all was working fine agin..?? Had a coffee, started it again, and the same crap was back again.. Been going on like that for a couple of days now. Some starts it´s ok, and some starts ends up with no tacho and flashing oil lamp, and an errorcode in the ECU.. The error code i get is the Engine Speed Sensor. It always starts sooner or later, but its pretty annoying to have it like this.. :/ From what I´ve been able to find it seems like the fuel pump relay gets signal from the speed sensor, and when there is no signal, the fuel pump doesn´t wanna run. (explains the problem with starting it) Also, some people indicate that it could be a ground fault. Question is, what ground where? I went around the engine bay, but couldn´t find any ground cable between engine and chassie. Aren´t there supposed to be one? Or is it grounded another way? Any other ideas or thoughts?
BlueShiftXD posted a topic in Engine, Transmission and ExhaustHow's it going Polo drivers. I have a problem with my Polo and I need to replace my Crankshaft Position Sensor. I have already replaced my Camshaft Sensor, that was rather simple but I can't find any labelled diagrams of the 1.0 MPI Polo 6n2 Engine on Google. I need to replace this part before Saturday as I'm selling my car. I would really appreciate it if somebody could get me some photos of where exactly the Crankshaft Sensor resides in the engine. I read here that it's somewhere under the battery but I'd really appreciate if somebody could get me a few photos and maybe a small guide on how to replace this part. Thank you for your time, much appreciated!
Guys I need some help; I have found that I require a new crank shaft position sensor on my 6n2's AUD engine.Does anyone know where it is located, how to get to it and how to remove it? Any Advice on where I could get one that is of good quality would also be appreciated along with any pictures that could help describe its location Cheers, Luke