Search the Community
Showing results for tags 'dimensions'.
Found 3 results
Hi guys, trying to work out a big valve setup for my HH head but info is a little scattered and hard to find. On my search I've put together a quick spec sheet with part nr's and dimensions. There are a few gaps where i can't find reliable information so feel free to fill them in and let me know. All the info has been taken from part numbers from VAGCAT and early mk2 & mk2f haynes manuals, again if anything is wrong then let me know! I hoped to go down the pinto exhaust valve route for the inlet valve and try and find a slightly bigger valve for the exhaust, then read the early mk2 haynes manual and it states HH and HB valves are shorter, and so the pinto valves won't fit.. I'll have to measure mine tomorrow and update! Polo valve sizes: HH/HB valve sizes: Inlet valve - 34.00mm x 104.00mm x 7.97mm stem (036109601F) Exhaust valve - 29.10mm x 104.00mm x 7.95mm stem (052109611A) GL/HK/HA valve sizes: Inlet valve - 34.00mm x 110.5.00mm x 7.97mm stem (036109601F) Exhaust valve - 29.10mm x 110.5mm x 7.95mm stem (052109611A) Hydro head valve sizes: AAU inlet valve - 32.00mm x 99.300mm x 7.965mm until July 1992 - From August 1992 6.970mm stem diameter. (030109601E - 7.965mm) (030109601N - 6.970mm) Inlet valve (all other) - 36.00 x 99.300mm x 7.965mm until July 1992 - From August 1992 6.970mm stem diameter. (030109601D - 7.965mm) (030109601L - 6.970mm) Exhaust valve - 29.00mm x 99.300mm x 7.945mm until July 1992 - From August 1992 6.050mm stem diameter. (030109611A - 7.945mm) (030109611D - PY exhaust valve - 29.00mm x 99.300mm 7.945mm (part nr?) Pinto/Transit exhaust valve - 36.2mm x 110.55mm x 8.02mm stem (part nr?) Used as a larger inlet valve on flat head type mechanical cylinder heads: Application: Ford Capri Mk1/Mk2/Mk3 2.0 1972-1987 Ford Cortina Mk3/Mk4/Mk5 2.0 1970-1982 Ford Escort Mk1 RS2000 2.0 1973-1974 Ford Escort Mk2 RS2000 2.0 1975-1980 Ford Granada Mk2 2.0 1977-1985 Ford Granada/Scorpio Mk3 2.0 1985-1989 Ford Sierra 2.0 1982-1989 Ford Transit Mk2/Mk3 2.0 1978-1994 TVR Tamsin 200 2.0 Double valve springs for mechanical head: Outer valve spring: 078109623A (Same as standard) Inner valve spring: 078109633A (Same as KR/2E/ABF)
Hi , Does anyone have a drawing of a polo typ86 with all the dimensions ? The kind you will find hundreds of being mk1 golfs etc.. but cant find one for the first polo I have used the search on the forum but either im looking for the wrong words either its not on here (yet) What im looking for is like the picture , but for a polo typ86 (mk1 it it matters) the more measurements the better Thank you to anyone who can help Grtz
I currently have a petrol polo estate. It would look as if it is leaking fuel. I want to replace the fuel lines but I cannot find anywhere that sells a new kit anymore. This means I will need generic tube. GSF and Euros sell this but I have no idea which diameter I need. does anyone know what tube I would need to replace my feed and take fuel tube. Added a couple pics. Thank you in advance!