Search the Community
Showing results for tags 'spring'.
Found 3 results
I have had a front drivers side spring snap on my 2006 tdi polo. I have replaced the spring but now can not get the shock back into to the hub. It will not go low enough to insert the shock. I have removed the trackrod end but the drivesshaft is still connected. I have previously replaced the passengers side with no issues, just needed to put slight pressure on the hub to allow it to slip in. Please can anyone help?
I raised the suspension on my coupe yesterday so it sits 40mm on the front. I was wondering if any one has found and tried any other spring retaining caps that would allow the top mount to sit 5 to 10mm further into the spring? Thanks. Joe.
Basically its higher on the right as seen in picture To be honest I dont know how coilovers work properly but I basically wound the bottom ring up and span the bottom camber bit up so its a 100mm drop (I'll try and explain with pictures) but some reason its a different height on the side, so i started turning the top ring up(Green bit on picture;which i have not touched before cus i just used the bottom bit) but it didnt make it any lower,(the yellow arrow showing where it was) i know i haven't explained very well but i dont really know what I'm on about, i've watched loads of videos but the coilovers are always different to mine, anyone help please!!