Search the Community
Showing results for tags 'wobble'.
Found 3 results
Morning guys, I know the obvious causes of wheel wobble but I cannot seem to cure it on my 84 bready. I have 14x6 alloys on with brand new tyres. They have all been balanced, tracking is correct, and all have spigots. I originally thought i cured the problem by changing the front discs which had an obvious sticking spot, but it returned again shortly. I have now changed the pads AND discs a second time for better quality ones and nothings changed. It has full poly bushings all round, the track rods seem fine. I did find that the single small disc bolt did come loose but i have thread locked that in, and doesnt it get held tight by the wheel bolts anyway?? The only thing i havn't changed is front wheel bearings but i can't notice any play in there. The wobble is between 55-65, felt through the steering wheel. It comes on noticeably when letting off the throttle too, but not when braking. The only thing I know of that it could still be is the bearings, or a wheel is buckled? However i thought they would pick that up when balancing, and im pretty sure i have tried swapping the front wheels to back but cant remember. Any ideas would be much appreciated. Cheers!
Basically.... I have a 'wobble' or rear end 'twitch' when braking or taking bends. This has only started recently and I have had tracking done to see if this affected it, changed my wheel bearings, checked my suspension and ensured my camber was correct.... Still no change and am wondering if anyone knows what this could be? Also, in one of the pictures it shows a black dust on the rear wheel. This is on both sides and I'm assuming by the texture and the wear on the tyres that they have been rubbing but they are not touching the arches or suspension so I have no idea what could be causing this??
Right, got a bad wobble above 50mph, I'm sure its not the wheels need balancing as just had them done and the tyres are all fine! Needs tracking done as I've lowered it 60mm but was wobbling before then and need to get this sorted ASAP! Any ideas as to whether track rods or something need replacing I'd be grateful for any input, cheers guys! Tom.