Recently Browsing 0 members
No registered users viewing this page.
New to this site so hoping I'm doing this right. I own a 2017 Polo Gti and am looking to do a few mods to make it different.
Looking for some websites or any pointers / advice.
Was going to upload a pic of my car but seems to be too large an image size...
Hello everyone. Ill double this post as my greet as neither seemed long enough for seperate posts.
Im felix. Always enjoy a good forum and ive always loved vws but nwver had one. Just got my first 6n2.
And within 48 hours i breakdown.
Had engine management light. And around 2 hours later battery light.(to which i started to head home around 13miles and brokedown after 10 miles) and just prior to it dieing had the ecm. Abs. Temp. Airbags and oil pressure lights come on. Car then died and would just click and not start.
I think ive traced it to either alternator or the alternator to battery lead.
Id really appreciate input/advice as im self taught and may be going wrong!
Also if anyone knows anyone in cardiff who comes out with a fancy vag laptop to diagnose please holla!
Nice to meet you all and thanks
ANIMAL! Joking, nice polo
Hello Polo people im planning something different to say the least, im putting individual throttle bodies on a AAV and possibly a GT in the future my question is has anyone fitted a crank position sensor and trigger wheel to one, the only way I can see it being done is on the crank pulley and making a bracket up to hold the sensor. If anyone has any advice it would be appreciated.
I have recently bought a 2007 1.4 VW Polo. I am still adjusting to driving the car and one thing I have managed quite a few times is going uphill in too higher gear or shifting up too soon (my previous car had a bigger engine). However when I do this in the polo I have noticed it shudders - I assumed this was normal as when I shifted down a gear it would stop shuddering and I could shift up once I picked up some more speed.
What worries me is sometimes when I do this the check engine light flashed for maybe 3 seconds until I shift down and then it goes out. After it does this I always check for error codes using my odb scanner but no errors are every found... Is this maybe just normal behaviour for the polo because it gets close to stalling? The car runs fine otherwise and the CEL never comes on at any other time.