here i have a set of 14x6 weller steel wheels from the 70's!

stud pattern 4x108, altho could be redrilled to a different pattern or using adapters!

all 4 wheels are freshly refurbed, not been driven on.

OFFERS PLEASE! altho i do have a rough figure in mind. thanks

Edited 12 March, 200917 yr by StreetBassScott

the rules state stick a price up fella...

£100 collected

any pics of them on a car whats the lowest ud take

nah no pics on a car sorry dude.

£100 collected altho could do lower if it gets them out of my room! aha.

Would you be willing to courier these?

You cant get adaptors from 4x100 to 4x108 dude, if you could get them re-drilled then id be willing to pay for the service and the wheels themselves!

Cheers

You can get adaptors....

How on earth do you think you can get ford wheels which are 4x108 on to a 4x100 PCD?

id be willing to courier these, if you dont mind organising it and paying for it seperately?

you can get adapters, i had some

where you get adapters from dude?

I'm interested if you show me some adapters from 4x108 to 4x100.

cheers

i got mine off ebay for £50 posted, sets pop up on there occasionally.

you can get them made fairly cheap also.

or redrill the wheels to 4x100?

or redrill your hubs to 4x108?

possiblilities are endless dude.

i just need these gone badly as I'm moving into my own flat and got no room atall!

so are these mini fitment?

no, ford fitment

Sorro for the hi jack didnt realise you could get ford to vw!

Been told many times that you cant get from 4 stud to 4 stud adaptors!

And as for you DUBdanny, need to calm down a tad fella! Its a forum mate, not everybody is a pro like you at knowing what adapters are available!

Typical club polo class for you that is!

are you interested mate?

need these gone quick!

you still got em?

et?

any pics

only have the pic above, seeing as all 4 are exactly the same, condition wise.

the et is unknown, but apparently they're from a rwd ford, so the et is low, below 0.

i test fitted them to my car without tyres (no pics), and with adapters, they were about 1/2 inch out of the arch, and those adapters were 25mm.

hope this helps. need these gone!

could you get sm more pics of these please

dif angles etc cheers

Ash

Edited 25 February, 200917 yr by StreetBassScott

can bring to UD!!!!!!!!!!!

what would you ideally like price wise cos found another set pretty much same condition as these but 13's to go on my fiesta

pmd

you still got wheels mate? where abouts are you?

gone as of UD.

sorry.