Model: VW polo ‘match’ 6n2

Engine: 1.4 8v, gloss black engine cover, polished manifold cover, painted alternator,gear box

Suspension: lowered approximately 110 at the front 100 at the back on unbranded German coilovers

Brakes: standard

Wheels and Tyres: 15x7.5 oz turbos wrapped in 165-50-15 bridgestone potenzas with 15mm fk spacers on the rear

winter wheels: 15x7 porsche teledials wrapped in 165-50-15

Exterior Styling: full respray in reflex silver, smoothed front and rear bumpers, smooth side strips/side repeaters, smooth gloss black roof with aeriel deleted, gloss black stubby mirrors, smooth sills with jack points and bumpy texture removed, fuel filler cap flushed, seems below rear lights smoothed, colour coded gti front splitter, de-badged, de-wiperd and handle removed at the rear, gti front grill, aero wipers, German pressed plates, all arches slightly rolled, 6000k HID kit

Interior Styling: full mk3 golf recaro colour heated black leather interior, momo 280mm team wheel with boss, black vw 6n2 floor mats, heater surrounds gloss black,strip above dials gloss black, 6n interior mirror, rear upper strut brace

ICE:Alpine 9880 headunit with ipod control, JL audio c5-650 component speakers, custom boot floor with Orion Cobalt amp co600.4. 12ich MTX subwoofer.

Security: Clifford g5 alarm and boot pop with total clousure

Comments: I brought the car completely standard last summer (2008) with 25,000 miles on the clock in near perfect condition. Since then I have made many changes all of which I have tried to keep clean and simple. Future plans include:- side strips removed and smoothed, smoothed side repeaters,leather interior, rolled arches and lower the car more, brake upgrade, engine conversion…..:)

Edited 2 March, 201016 yr by wellse6n2

new picks coming soon! its now lower and on winter wheels

Edited 30 January, 200917 yr by wellse6n2

Looks good mate! Liking the wheels. Did the BMC make much of a difference because I'm thinking of getting one.

Looks good mate! Liking the wheels. Did the BMC make much of a difference because I'm thinking of getting one.

thanks :)

its does a bit, definately more responsive.

hope this helps

You need to totally smooth the boot. Looks daft with just the handle, and also I don't think the front plate looks in place with it just being stuck in the middle of a smoothed bumper. I'd either remove it or move it down to the grill.

It could do with a GTI splitter and some more lowering at the front :)

Edited 1 February, 200917 yr by indy231

You need to totally smooth the boot. Looks daft with just the handle, and also I don't think the front plate looks in place with it just being stuck in the middle of a smoothed bumper. I'd either remove it or move it down to the grill.

It could do with a GTI splitter and some more lowering at the front :)

hey thanks for the comments.

i dont mind the handle on the boot to be honest, I've seen alot with and without and for the moment i dont think it looks to bad, maybe in the future..

as the numberplate.. i had it on the lowergrill for a while, but just didnt look right. i also tried having it in the window but is just hassle at petrol stations.

It's now lower front and back but have been busy and havnt had time to put the pictures up. oh and i brought a gti front splitter, just waiting to fit it when the rest of the body work is done, which should be next month :)

Edited 1 February, 200917 yr by wellse6n2

heya, you added me on msn & found you on here

cars looking good, 6n2s with smoothed bumpers always look nice

have you got any pics with the plate on the grill?

i recon if you was to have to have it on the bumper maybe go for plain, less busy plates?

& as above maybe drop it down some more, you got quite a bit of arch gap even on the modernlines

sorry if i sound rude! lol loving the car but these are jsut bits i would look into

you ever over in wycombe?

I'm in henley every day working but I'm in the work van so you would never see mine, saying that iv never seen yours tho

good job man, get yourself to the bucks dub meets!

i also tried having it in the window but is just hassle at petrol stations.

What kind of hassle?

I've ran no front plate whatsoever for 5 months now and never had hassle off petrol stations?

heya, you added me on msn & found you on here

cars looking good, 6n2s with smoothed bumpers always look nice

have you got any pics with the plate on the grill?

i recon if you was to have to have it on the bumper maybe go for plain, less busy plates?

& as above maybe drop it down some more, you got quite a bit of arch gap even on the modernlines

sorry if i sound rude! lol loving the car but these are jsut bits i would look into

you ever over in wycombe?

I'm in henley every day working but I'm in the work van so you would never see mine, saying that iv never seen yours tho

good job man, get yourself to the bucks dub meets!

thanks for the comments man :)

i think when I'm back from uni in a couple of weeks the plate will go, it was temporary until i could figure out what to do with it, but i think i'll just go without a front plate again..

and as for drop.. i hav'nt actually put the modernlines back on since I've droped it more... but i think the arch gap should be closed, if not, lower it shall go! :)

and yhh I'm in wycombe all the time, probably spend more time there then in henley! so where do you work in Henley?? and i should be at Bucks dubs next month, or maybe this month.. depending on when i come back from uni

Edited 3 February, 200917 yr by wellse6n2

i also tried having it in the window but is just hassle at petrol stations.

What kind of hassle?

I've ran no front plate whatsoever for 5 months now and never had hassle off petrol stations?

Well, it might be just me, but the petrol station i go to would'nt let me fill up until i showed my plate and this just kept happening. probably the petrol station just having it in for me

but, the front plate is coming back off, ruins the smoothed bumper. i think I'm just going to try a different petrol station from now on

tis niiiice

Make a custom front 'plate and fit it to the underside of the passenger-side sun visor so that you can just leave it flipped down when on the public roads? And flip it up for shows, photos and when parked etc!

Looks good so far though, loving the smoothed look on silver 6N2s :)

Make a custom front 'plate and fit it to the underside of the passenger-side sun visor so that you can just leave it flipped down when on the public roads? And flip it up for shows, photos and when parked etc!

Looks good so far though, loving the smoothed look on silver 6N2s :)

Thanks for the comments mate!

That idea sounds spot on, i think i'll get to it when I'm back from uni (few weeks or so) and i'll put some pictures up. Thanks for the idea

The car is getting there, more smoothing has to be done, the sidestrips, side repeaters, and splitter is next on the list. when the student loan comes in..

Edited 5 February, 200917 yr by wellse6n2

tis niiiice

Thanks mate, i think your car has the final piece to my project though!

Looks great anyway mate, just the plate spoils it haha, other than that i like a lot!

ha! thanks mate. yhhh your right, just has to go!

Any shots of the engine bay?

Any shots of the engine bay?

i havn't taken any yet, but i will when I'm back from uni in a couple of weeks.

Don't want to dissapoint though, the mighty 1.4 is'nt anything special!

Dude its just i have the same engine and was gonna paint the engine cover, however not sure if i have to leave this off anyway if i add an induction kit??

Dude its just i have the same engine and was gonna paint the engine cover, however not sure if i have to leave this off anyway if i add an induction kit??

oh i see man.

well, i have taken the cover off completely, and fitted a BMC induction kit. But the only issue is that I'm using breathers as well, which can look messy..

Alternatively you could run an induction kit off the intake to the engine cover, could be easier..

hope this helps

Looks smart mate

just get it sitting a bit lower and your onto a winner

Looks smart mate

just get it sitting a bit lower and your onto a winner

cheers mate :)

well., i need to try it out on the modernlines again now its lower, but if there is still space i will defo go lower! :)

New pics, was back from uni for a couple of days and decided to give the car a good clean and remove the plate. Nothing special.

More updates in 3weeks, will have my gti front splitter fitted and colour coded, side strips deleted and depending on weather might put the modernlines back on. Thanks for looking all comments welcome

Edited 16 February, 200917 yr by wellse6n2

front looks sooooo much better now

love it

sorry i forgot to reply when i last posted

I'm a labourer with some brick layers so iv been doing a kitchen in a house in the road next to the station, & now I'm back down in shiplake doing a big extention there

& you missed the bucks dub met, was on wednesday!

altho it was a bit quiet cos the weather

jsut come to the next one!

front looks sooooo much better now

love it

sorry i forgot to reply when i last posted

I'm a labourer with some brick layers so iv been doing a kitchen in a house in the road next to the station, & now I'm back down in shiplake doing a big extention there

& you missed the bucks dub met, was on wednesday!

altho it was a bit quiet cos the weather

jsut come to the next one!

cheers man :) just cant wait to get the rest done in a few weeks and get the wheels back.

but yeah, i do exactly the same as you when i'm back from uni, labouring is good money man.

Was pissed off i missed the meet this month, was at uni, but i will definately be at the next one!need to have a look at your car.

oh and i heard that your uncle can do arch rolling?

need to get mine done soon!