Skip to content

Hi-Torque slim starter motors for 16v's with Mk2/3 Flywheel - Now with Pricing

Featured Replies

Hi Guys,

I could do with some feed back regarding the use of the 'slim' starter with the AFH/AVV or any other engine really.

Is the motor up to the job? Do you have any problems with starting or do they tend to have a short life span? or do they work fine?

I've noticed mine struggling with my AFH but don't really know if its just past it's best.

The reason I'm asking is that I'm in talks with a company to perhaps have some uprated motors made (High Power, Low Current and Lightweight).

I know demand is is driven a lot by price and I can see these being at least £150-200 but need to confirm prices would anyone who would be interested in one?

Also would this starter fit any other gearbox/engine e.g. a Golf?

Update

Pricing update

Update on prices. These are the maximum price and I hope to be able to get it slightly less than this especially for Club Members ;)

5 Units: £180+ VAT

10 Units: £150+ VAT

http://www.clubpolo.co.uk/forum/index.php?...03096&st=25

  • Replies 69
  • Views 11.6k
  • Created
  • Last Reply

Top Posters In This Topic

So this would also fit a standard mk3 too I take it?

My starter is getting sluggish at times so I would be interested in one.

  • Author
So this would also fit a standard mk3 too I take it?

My starter is getting sluggish at times so I would be interested in one.

Yeah it would :)

  • 4 weeks later...
  • Author

Update on prices. These are the maximum price and I hope to be able to get it slightly less than this especially for Club Members ;)

5 Units: £180+ VAT

10 Units: £150+ VAT

So can I see who would be up for one. I hope that if we can get 5 people that we could sort something out to get the 10 unit price.

We are still a bit away from actually haveing a finished motor. Need to try and supply them with a bottom end and gearbox so they can get the fitting right. So you have time to save up some cash! :)

1- Mark

2-

3-

4-

5-

6-

I'd take one.

  • Author

Cool.

1- Mark

2- POvwLO

3- Cymro

4-

5-

6-

Got a 1.6 block ( AVY )

IF need be and its not beeing used, Happy to let me used for development

Mine seems to really struggle every once in a while, most likely shitted up/dead brushes, but saying that I've never changed it in 5/6 years of ownership so have no idea how old it actually is.

so i may as well have something i can use in a conversion or sell on when the car dies. :lol:

Do you know what type there going for? Geared over direct drive I'm assuming.

  • Author
Mine seems to really struggle every once in a while, most likely shitted up/dead brushes, but saying that I've never changed it in 5/6 years of ownership so have no idea how old it actually is.

so i may as well have something i can use in a conversion or sell on when the car dies. :lol:

Do you know what type there going for? Geared over direct drive I'm assuming.

Yeah it will be a geared type starter motor. :)

  • Author

Has anyone got... or can get pictures of the slim starter motor fitted to the AFH or ARC/AVY block?

Or does someone have a slim starter I can borrow?? :)

AFH BLOCK

DSCF1034.jpg

Has anyone got... or can get pictures of the slim starter motor fitted to the AFH or ARC/AVY block?

Or does someone have a slim starter I can borrow?? :)

Same as any 6n/6n2 starter. The generic Bosch motor is the same on a thousand cars from Audi V6's to Volvo V40's.

  • Author
AFH BLOCK

Cheers Dan.. :)

Has anyone got... or can get pictures of the slim starter motor fitted to the AFH or ARC/AVY block?

Or does someone have a slim starter I can borrow?? :)

Same as any 6n/6n2 starter. The generic Bosch motor is the same on a thousand cars from Audi V6's to Volvo V40's.

OK anyone got a 6n/6n2 starter I can borrow! :lol:

Got rid of all of mine Doh, isn't a slim one the same dimensionally as a 6n one, just has a different throw on the pinion?

Got rid of all of mine Doh, isn't a slim one the same dimensionally as a 6n one, just has a different throw on the pinion?

Virtually, yes. They bolt on the same, actual motor reach can only be out by a few mm's if anything - the aluminium casting (adaptor) differs, along with the placement of the stop bearing and pinion position on the shaft. Shaft length mat also differ by a few mm's, i didn't notice.

starters1.jpg

  • Author

I've just tided the thread up a bit :)

I've been asked for some extra info which I don't know off the top of my head... just wondering if anyone else did :-D

StarterMinReq.jpg

StarterImage.jpg

Obviously the easy stuff I can answer its mainly the number of teeth on the mk2/3 Flywheel and the dimension as per the diagram. I can probably find it out this weekend when I raid my garage but if anything it will be good to check my figures! :)

I have a gearbox with cracked casings, but they're ok where the motor bolts on, would that be useful?

Also "special mods" ability to start more than a 1.3 haha

  • Author

:)

Well the order is going in today. So Unless I hear otherwise today I'll only be ordering 5 Units.

1- Mark

2- POvwLO

3- Cymro

4-

5-

6-

Are you not getting a sample to try first?

What brand are these?

  • Author
Are you not getting a sample to try first?

What brand are these?

The company making them is called Powerlite

Yeah one will be made first and make sure the design is good and then the rest will be made up. Might need someone to test it if my engine is not made up by then! :)

  • 3 weeks later...

Can test on mine .. ;)

I may be using afh pistons on avy internals etc so the comp will be rather high..

But if it can start that I'm sure anything else will be a minor :)

  • 2 weeks later...
  • Author

The test starter motor is here.

IMAG0469-1.jpg

Test fitted to a normal 1.3 block and it fits nicely. Will be fitting to my AFH this weekend/next week and see how it fits and works!!

I would like one too Mark. Is it too late?

  • Author
I would like one too Mark. Is it too late?

No, not at all..

1- Mark

2- POvwLO

3- Cymro

4- runforrestrun

5-

6-

7-

8-

9-

10-

5 Units: £180+ VAT

10 Units: £150+ VAT

After this 'group purchase' single units will be available but will cost £280 + VAT. So if anyone out there wants one this is the time to get them. If we can get close to 10 units i.e 7/8 then the club will look to top the group buy up so everyone can benefit from the lower price.

Better pics? Lol

I'm excited and relieved. My starters coming to the end by the feel of it as every few starts it tries to stick. Lol

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.