Your doing one too? haha!

Remap wont be needed, but i bet getting the carbs set up will cost more than a re-map anyway

tbh, i think i should step away from the cams. asif 140bhp (ish) isn't enough

I'm still ringing newman to see if they do them any cheaper. If i can half the price of the catcams one i think its a done deal.

Definately ring newman, usually a fair bit cheaper than the others and a very helpful company.

why did you paint the starter even though you cant see it when fitted. lol

Them cams are massive.

Your a faggot, why ask this on here after you have asked (and been answered) on facebook haha!

I shall answer again though, with a bikecarb mani you CAN see the starter

And why would i paint everything else and leave just the starter messy? I'm not as half-arsed as you, clearly

And Cheers Badger, I'm going to ring all 3 (kent, newman, piper) and see what they say, best profile for the buck will get my custom lol.

Edited 23 January, 201115 yr by B-shaw

This has to be my favorite MK3 and the detail you going is pretty impressive

good luck with the new engine changed

This has to be my favorite MK3 and the detail you going is pretty impressive

good luck with the new engine changed

You wouldnt think that if you had ever met toby.

Hes a looser.

Edited 27 January, 201115 yr by MaxMax

Cheers melon :)

Oh and Max, I've met him.. twice i think

Looser

Yeah You supplied me with seats for my polo loon and a rear beam

you have anymore loon stuff

Edited 27 January, 201115 yr by residentmelon

Indeedy, haven't got any more stuff left I'm afraid. It all had to go when i gave up one of the garages.

£50 Stainless 4 Branch, don't mind if i do

Bit dirty in the pic, but it'll get covered in heat wrap anyways.

Will be making a stainless blank for the EGR? valve thingy with stainless bolts to tidy that slight bodge up

So what wheels you buying then?

And can you pick that stuff up for me then tobes?

:-D

Yeah can do dude!

And Shhhh.. I'm not getting any wheels

Yeah can do dude!

And Shhhh.. I'm not getting any wheels

Wheels? i meant deals.

Cheers for that , be a big help.

Let me know when you get them and we'll sort something out mate,

50 quid is cheap for that mani get it done

I know, it had to be done haha.

Wasn't far from me, like 20 mins away.

Probably cant afford it but fuck it, I wasn't missing out on such a steal.

That good for a manifold. I got for mine for £50 Ashley one was a listed as a 1.3 golf and the advert was spelled wrong too which help in my favor.

Sorry about you garage dame nosy old man neighborer.

If you still want that master cylinder you welcome too it.

Edited 28 January, 201115 yr by residentmelon

Why are AFH cams so frigging expensive :mad:

KamRacing

But i so so badly want some... haha

Try through them

http://www.catcams.co.uk/acatalog/VW_Polo_...6v__101hp_.html

A quotation I had from them

7608523 Camshafts £512.26 + Vat/Pair (These are the 288 / 274° specs cams) So the ones you want must come quite cheaper. I have a spare set of schrick cams 263/263 for grabbing quite cheap. If you are interested give me a pm.

Nice work

Picked some sexy tubing up today...

Also got a MK2 ignition

yessssssssssss! how much did the subframe set you back?

£200

Wont be staying black either :p

ORANGE

mate you can get the carbs next week aswell then you rolling!!!

Of course

Hopefully next month I'll be ordering some more sexy tubing

gooood laddd, dunno if I'm gonna fit the strut brave to mine. will it even make tht much of a differenc?

I went from standard to that and the G-laderseite blocks and it made a hell of a difference.

Whyd you have it off me if you didn't really want it? haha!

I'd just like to boast, i just managed 0-60 in 10 seconds with only a hamster in a ball powering it.

I battered my mates 16v 6n too, was pulling so far in front it was amaze.