Skip to content

getting a little nervy ****UPDATE****

Featured Replies

  • Author
The king of bonfire pissing turns up once again.

I feel sorry for you, mrgt - overall it sounds like you've had an irritating experience since you decided to set upon twin webers - and with crunchtime approaching tommorow with foreseeable stress up ahead, the last thing you are asking for are spiteful comments which have no relevance. At the end of the day, no pain normally means no gain, and for entry level enthusiasts like you and me, that's the only way. Just bear with it, because when you do it the second time round you'll have more respect (or fear!) of what you're up against.

Aldon seem to be fine on the whole. Standard valvers were making 100bhp +/- 2-3bhp, G40's with minor mods were making the result expected of minor mods.

It's only the diesels which come up with dodgy results from time to time.

thank u danny-lee--- what u have wrote is constructive/interesting and very very true and 2 b honest I'm fed up with comments on here that have no relevence not just on my threads but on others as well.

yeh it has been very irritating but like u said for entry level enthusiasts who are doing it 4 a first attempt its going 2 b stresfull i knew it wasnt going 2 b easy but didnt no it was guna b this hard either.

i think next time ill have mor fear!!!!!

BUT i have explained 2 aldon exactly the situation I'm in and what has and hasnt been dun e.t.c and ther very confident that its a case of just setting up e.t.c but still always in the back of my mind that it wont b that easy!

  • Replies 75
  • Views 7.6k
  • Created
  • Last Reply

Top Posters In This Topic

  • Author
Tbh after all the work you've put in, who cares what people say mate. It will almost certainly make more than 100bhp, which is what you were aiming for, so you are unlikely to have failed. I dare say he's just jealous, another armchair carb theorist trying to spoil your fun. I'm sure it will go and sound miles better than it did before, so who cares whether or not bike carbs are superior or more sophisticated or whatever.

Respect to you mate.

haha i couldnt of wrote n e thing better myself!!!! thank u skatty and wen u look at it like that you are rite its hard not 2 fail totally!

Hope you get the figures you're after buddy, but the rollers at Aldon seem a bit off from what I've heard from other places (Midland VW for one)

Ran mine at RR day and said I got 88bhp, with what turned out to be a semi knackered MAF, only 75bhp standard

A rival Rolling Road company offering impartial advice on a competitor... :lol:

Aldon's rollers are good (when you're not wheelspinning on them) Always produced sound results on standard cars (the 226bhp Cupra R is a good example)

Rob- Hope it goes well, try and get a video of how it sounds on the rollers :-D You get my PM last week?

I guess 111bhp

:-)

  • Author

no i didnt get you are p.m mate wen was that??

oh and the lump i brought of u is spot on mate really pleased with it. :thumbsup:

111bhp? very accurate!

ah it was u that said bout the seat leon i remeber now!

Nope, just ensuring that everyone is well informed that webers arent better than bike carbs

I didnt say bike carbs were better than webers...

so what are you saying?

Again, at no point did i say bike carbs are actually better than a set of webers, just that they are more sophisticated.

and since when did being sophisticated actually make anything superior in anyway?

i dunno what u have or haven't done mr gt but fair play to you n i hope u get the gains your hopin for :thumbsup:

  • Author
Nope, just ensuring that everyone is well informed that webers arent better than bike carbs

I didnt say bike carbs were better than webers...

so what are you saying?

Again, at no point did i say bike carbs are actually better than a set of webers, just that they are more sophisticated.

and since when did being sophisticated actually make anything superior in anyway?

i dunno what u have or haven't done mr gt but fair play to you n i hope u get the gains your hopin for :thumbsup:

thank u mate

I didnt say bike carbs were better than webers...

so what are you saying?

I'm saying that they are a cheaper alternative that would have offered same/similar gains for a much cheaper cost rather than leaving him skint

Again, at no point did i say bike carbs are actually better than a set of webers, just that they are more sophisticated.

and since when did being sophisticated actually make anything superior in anyway?

For the application hes using it for, a set of bike carbs would offer superior fuel economy and better day to day driveabilty, Thats why there sophistication makes them superior :finger:

But hey i dont give a shit...

tateL_228x304.jpg

Good luck mate, and yeah get vids up of it on the rollers :-D

Sorry if it isnt relevant (sp?) but i think you and others took hypojams comment the wrong way (or maybe i am :ninja: )

The way i read it... he was just "asking" why you didnt go with bike carbs?????? not saying "you should of fitted bike carbs you stupid fool" ;)

And then adding some usefull advice (imo) for people who are/will be choosing between T40`s and bike carbs

Hope it goes (went?!) well. Good to see someone getting a car properly setup on a dyno, rather than guessing jetting on the road.

good luck mate, hope you are car gets the setting up it needs! it's a mint looking car and with the engine correctly set up the hard work should be well worth it :)

sounds like this is going to wicked. i think you will get just over the 100bhp. in a light weight GT its going to fly lol. get the figures up plz.

what cam you put in it??

matt

Good luck mate, and yeah get vids up of it on the rollers :-D

Sorry if it isnt relevant (sp?) but i think you and others took hypojams comment the wrong way (or maybe i am :ninja: )

The way i read it... he was just "asking" why you didnt go with bike carbs?????? not saying "you should of fitted bike carbs you stupid fool" ;)

And then adding some usefull advice (imo) for people who are/will be choosing between T40`s and bike carbs

It's sarcastic and provocative if anything, failing to put a point across from the word go and basically just trying to make the guy feel like a complete moron for choosing DCOE's instead of bike carbs.

Everyone has moments, this is just one of hypojam's. And probably one of mine, too.

Hug?

Good luck mate, and yeah get vids up of it on the rollers :-D

Sorry if it isnt relevant (sp?) but i think you and others took hypojams comment the wrong way (or maybe i am :ninja: )

The way i read it... he was just "asking" why you didnt go with bike carbs?????? not saying "you should of fitted bike carbs you stupid fool" ;)

And then adding some usefull advice (imo) for people who are/will be choosing between T40`s and bike carbs

It's sarcastic and provocative if anything, failing to put a point across from the word go and basically just trying to make the guy feel like a complete moron for choosing DCOE's instead of bike carbs.

Everyone has moments, this is just one of hypojam's. And probably one of mine, too.

Hug?

Ahh right, ooops! :oops:

I just read everything in a nice way :-)

Oh i could do with a hug right now :nod:

dude only thing i'm going to say is WELL FOOKIN DONE!!!!!

Twin 40s are a idiot to set up and get all fitted and sorted and on a tight budget its 10 times harder, mucho rspecto dude and deffo get some pics/vids and results up when all done,

you'll love the 40's once sorted,

also a good tool to get is a carb balencer that measures airflow into each entry if that makes sense, only about £40 but well worth it for just simple balencing

1958.jpg

Hope you did well mate,

I'm guessing 109bhp

It goes without saying, but let us know what happened ASAP.

I'm guessing 109bhp

104bhp 8-)

Five points go to whoever gets it right :-)

Sees bandwagon.... jumps on....

113bhp for me - assuming they've managed to set it up okay.

My bet is 115 brake, see how it goes! Prize for the winner? Blowie off mr walsh?

106.... but at the fly or wheels hmmm

95bhp. DCOE's are good, but not miracle workers! Don't forget it's an otherwise standard engine I think.

95bhp. DCOE's are good, but not miracle workers! Don't forget it's an otherwise standard engine I think.

Made 96bhp on stock GT injection on Aldon's rollers ;)

Well the old man who ported and polished the head must've been a genie!

95bhp is a pretty pessimisic value though, on reflection.

I say 200bhp.

I'll have a stab at 113bhp

111bhp.

edit already been bet.

erm..108 then

Edited by max

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.