Skip to content

getting a little nervy ****UPDATE****

Featured Replies

  • Author

haha well its dun!!!!!

must say a thank u 2 john at aldon who is sounds as a pound!.

went really well only on the rr 4 bout 1 and a half hours! cost me £230 all in!

here are the figures and fuck me i shat myself wen it was being ragged! just witin 4 it 2 go pop!

thanks 2 everyone 4 all the comments and ther the winner is.......

Edited by mrgt

  • Replies 75
  • Views 7.6k
  • Created
  • Last Reply

Top Posters In This Topic

xcore wins! :-D

Nice work there 8-)

Edited by 86C

  • Author

haha looks like xcore is gettin a blowie of walshc............fucking tuck in!!!!!

Not a bad result, although I expected twin 40s and the cam to add more than 10bhp- did they swing the cam timing round?

How does it sound :-D

Pete

  • Author

yeh they played about with the vernier e.t.c

it sounds fookin mental on full throttle it just drowns out n e thing else around

i think 1 of the issues is the inlet manifold not being perfectly ported 2 the head and inside the manifold its rough not smooth as it should b john at aldon said that wont make a huge huge difference but a maybe a bit.

yeh they played about with the vernier e.t.c

it sounds fookin mental on full throttle it just drowns out n e thing else around

i think 1 of the issues is the inlet manifold not being perfectly ported 2 the head and inside the manifold its rough not smooth as it should b john at aldon said that wont make a huge huge difference but a maybe a bit.

Perfect when the missis is the car might think about gettin this done :lol:

well done for breaking the 100bhp barrier :thumbsup:

Could you list the total mods to the engine?

YES

Nice one matey! 8-)

Hope it goes (went?!) well. Good to see someone getting a car properly setup on a dyno, rather than guessing jetting on the road.

Sorry :oops: I'll get the proper engine done i promise! :lol:

  • Author

yes list of mods are:

4branch

decat

shrick 268/268 cam with vernier

poor quality inlet manifold

40's

and yoof's old lump which is standard just reconed and port and polish

Nice one matey! 8-)

Hope it goes (went?!) well. Good to see someone getting a car properly setup on a dyno, rather than guessing jetting on the road.

Sorry :oops: I'll get the proper engine done i promise! :lol:

And more gas required... ;)8-)

well done both of you :)

mrgt an xcore

106 is good going :)

good result on the rollers and not as much as you expected to pay! sweet!

good result on the rollers and not as much as you expected to pay! sweet!

Are you still running a gt box?

must be pretty rapid on short ratio box.

Any idea of 0 - 60 times?

must be in the 7s

Edited by carver

Nice one mate :-) need a nice vid so we can all hear it now :nod:

As promised, 5 points go to xcore 8-) (i dont give blowjobs, I'm a gentleman ;) )

istockhand20pointingjs0.jpg istockhand20pointingjs0.jpg istockhand20pointingjs0.jpg istockhand20pointingjs0.jpg istockhand20pointingjs0.jpg

106bhp! Bet thats a good laugh to drive? Well done buddy.

I'd be kacking my pants too listening to my car being thrashed. Pushing the car home don't sound a good (or clever) idea!

  • Author

no a gt lump on 40's at 7500rpm is very very loud and i was 2 b fair shitting myself

yeh i still have a gt box just with a g40 clutch its great fun! not rapid but very very nippy 2 say the least

Nice one mate, congrats.

What 4 branch are you using?

nice one lad, deffo get some videos up as i fell asleep dreaming on a gt on twin 40s for project muppet lol and need to hear the sound.

hypojam - stop getting your knickers in a twist, you could have either just shut your mouth, or said something constructive instead of always having to feel like your in the right.

i've got a camo keyboard btw ill send it to you in the post ;)

  • Author

thank u m8 u said it.

i dont mind people posting back and saying good or bad things but unconstructive useless posts are i real downside 2 this forum ther is 2 much of it.

its simple i will post up if sum1 has a problem only if i no what I'm talking about 100% otherwise ther is no point in posting

i will get sum pics up asap..

thanks 4 all the comments

  • 2 years later...
  • Author

reading this old thread brought back fond memories :)

Edited by mrgt

i put a weber on my mk2 :thumbsup: made a hell of a difference and scared the shit out of passers by when the second choke opened

What,fond memories of you biting someone's head off for asking a simple and genuine question?

Great.

Leon - the twin choke downdraught carb can sound really good,even a Pierburg with the right filter such as a sponge design perched on the top.

But twin 40s it aint - individual throttles/chokes for each cylinder have to be heard to have any idea,and a 300yard radius is usually sufficient..

indeed, hypojam was just offering advice and input, something done on a car forum, and you immediately took up the offensive position.

bike carbs due to their design, when setup correctly over considerable gains in both power and efficiency over the equivalent weber/dellerto sidedraught carbs. the design is vastly improved and tbh they were at the peak of carb developments, before making way to ITB's in the very late 90's.

i do <3 the sound of a pair of webers, they scream, but nothing that couldnt be had with bike carbs, for a fraction of the cost (you could have the bike carbs, stripped cleaned, refitted and the car RR'd) for less than the cost of a set of new webers, which isnt particularly a good idea, as the new webers are a patch on the quality of the ones made 10 years ago.

however it is nice to see your spelling and grammer has improved, as attempting to read your previous posts, was painful to say the least!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.