My new rims all the way from Japan to USA then UK , these are i think off a 1980's MR2

Hoshino Impul R1 (Mesh)

Sizes: 14"x6.5 +38 Offset

PCD: 4x100

Weight: around 16 pounds each

I am going to paint them black i think

Proper split rims and not imitation? Look very cool.

Proper split rims and not imitation? Look very cool.

OOOO yas proper split rims. It took me a long long time to find rims like these.

jay

Good buy that. Try and get some deeper dishes for them.

How much were they if you dont mind me asking?

Good buy that. Try and get some deeper dishes for them.

How much were they if you dont mind me asking?

$550 275ish+Postage=350 good price? With Slicks and the rims are mint!

ye i was thinking of getting some deep dishes, but cos iv got fk coliovers it may rub and they do have the right offset so i don't know? were would i get 14" ones from? i have seen 15" but not 14"

thanks jay

Id give some schmidt dish's a try

Sam

nice rimz

will you have to get spigot rings or bigger centre bore on em?

They look sweet mate, look a bit like my compomotive splits.

nice rimz

will you have to get spigot rings or bigger centre bore on em?

Yep they have spigot rings that have been pressed in. polo ones 57? mr2 are 60? i think

they're close but not quite, mine are 15's though.

they're reet pimp, with deeper dishes theyd be awesome!

who needs bigger dishe's when you've got a proper race bread split rim!

they look fine! wouldnt bother with wider lips, it'll mean arch work if you go much wider

nice set of motorsport splits there sir... dont bother with "wider dishes"

Hi

Dose anyone knows were I can get some slit rim bolts or are they just standard bolt type?

Thanks jay

I believe they are just standard bolts mate ..

I wouldnt mind knowing iff they definatly are ..

I have just got off the phone form Rimstyle and they said they make bolts for split rims ..

I'm awaiting there qoute for the splitrims and some dishes i am ordering .

Edited 18 June, 200818 yr by StevieDavison

useful website for spilt rim bolts and false ones too!! :-D

http://www.titanium-touch.de/titanium_touch_index_uk.htm

Jesus, just googled these wheels and found a gem of a page:

http://s148.photobucket.com/albums/s29/Tur...Rims/?start=all

Some proper well nice wheels

Edited 18 June, 200818 yr by Coops90

Jesus, just googled these wheels and found a gem of a page:

http://s148.photobucket.com/albums/s29/Tur...Rims/?start=all

Some proper well nice wheels

Most of these type of wheels r jap drift wheels and cost a fuk load some work's wheels r like 350 per wheel! that's for 14"-15"

jay

who needs bigger dishe's when you've got a proper race bread split rim!

[

Most of these type of wheels r jap drift wheels and cost a fuk load some work's wheels r like 350 per wheel! that's for 14"-15"

Some arent that unreasonable, Weld Motorsport Magnums are pretty sweet 13x8 4x100 wheels and are about £600 a set.

Most of these type of wheels r jap drift wheels and cost a fuk load some work's wheels r like 350 per wheel! that's for 14"-15"

Most of these type of wheels r jap drift wheels and cost a fuk load some work's wheels r like 350 per wheel! that's for 14"-15"

You know they looked mint though Phil !

gunna look good buddy when you get these bad boys on

Edited 21 June, 200818 yr by Daryl

wicked wheels.... :cool: