Skip to content

SUMP GUARDS/BATTERY BOXES/SHOW CAGES

Featured Replies

I'm intrested in a sump guard 4 a 6n :D

  • Replies 62
  • Views 4.8k
  • Created
  • Last Reply

Top Posters In This Topic

a stainless steel sump guard? i wouldnt buy one based on the fact it would weigh more than the res of the car!

6n sump guard would be ace. i tryed to get a group buy going from a place i found in PVW but he needed alot of interests to of made it worth while for him so it didnt happen.

def interested in a sump guard around 100 - 150£ i would say is a god price too

sumpguard is defintely a god idea, get it done

Sumpguard, sumpguard, sumpguard.

Did i mention sumpguard?? :p

Yeah,a sumpguard wants to be aluminium,though the brackets could be in stainless. I have engineering workshop facilities myself,being in engineering,and the only such parts I've made for mine were a bull-bar type rear exhaust hanger (a component you could probably sell to many pre-'94 owners) and the bike-carb flanges (in billet brass,of all material choices).

If the sumpguard consists of mainly aliminium though thats going to get worn down fairly quicker compared to steel which is tougher.

The motorsport industry must have it all wrong,then.

Motor sport is about going fast hence less weight surely? but for people who just want to run silly low cars without cracking their sump, surely stainless steel is fine, 6Ns are hardly fast as it is lets face it

Hoyking a dirty great lump of stainless under your car aint gonna be easy when fitting either! Alloy all the way. 1/4" aluminium isnt gonna wear away unless you're literally scraping it constantly!

there is a specific aluminium alloy for sump guards called dural which is also used to make tipper beds

I'm too low for a sump guard :D

^^ haha i knew a comment like that woule be coming, and just how practical is your car, ok so maybe you can drive it but i wouldnt really call it practical where as a nice drop with a guard is going to be much more practical IMHO.

The motorsport industry must have it all wrong,then.

whats with the cocky comments u nob I'm just stating what i thought loads of people run silly low on here and i know i'm gona so i'd rather fork out n pay for something strong thats gonna take some force rather than some lightweight thing that aint gonna hold out when smackd?

Well pointed out about the aluminum part. I can understand people evaluating that an aluminum guard would not be able to take as much hammer as a steel one. Fair point. But in hindsight if you look at a sump guard, it's shape and size would equate to it being made out of nothing other than aluminum. One made in steel would be ludicrously heavy and with it being so tough could actually cause damage to the chassis or at least its mounting points as instead of flexing around a impact like an aluminum guard it would take the full force of the impact and carry it up into the chassis. Not good.

The idea for a stainless one is in the right place, the maths just don't add up.

Please feel free to correct me if I'm wrong.

Simon

The motorsport industry must have it all wrong,then.

whats with the cocky comments u nob I'm just stating what i thought loads of people run silly low on here and i know i'm gona so i'd rather fork out n pay for something strong thats gonna take some force rather than some lightweight thing that aint gonna hold out when smackd?

please, if you don't know what your talking about, shut up.

you could run a 4mm aluminium guard and all you low boys would literally scratch the surface, never mind bend it. you want a bit of give in the guard so it doesn't bend your chassis as soon as you belt something. i really don't think you've grasped how heavy duty even thin stainless is.

the proper way to make a guard is to have a light duty plate with 4mm thick ribs mounted onto it that you can replace as you wear though them, rather than having to make a new guard every time. its alot easier to make some flat strips than it is to make a whole new guard.

Sheet stainless is floppy. Given the thickness it'd have to be,in order to not simply dent or flex like a roof panel,it'd not only be heavy - it'd be expensive. A tray/sledge wouldn't be needed for lowered road cars though,just a stainless bumper/bar hanging down to protect it would suffice. It'd have to be engineered to give way,in sacrifice,in lieu of shell damage though.

a 6n sump guard isnt flat tho, the bend you would put into say a 2mm plate would put alot of strength into it.

I've seen rally cars with alloy sump guards elevate 5ft over a jump and land on a rocky surface time and time again without failure. I'm a philosophical thinker myself,but wisdom will always trump it in an establised subject - aluminium has proven itself over steel for this application. Hope that's not too sarcastic.

Would your workshop contain a chroming kit of some description? :)

need to make some proffit, before i start buying equipment

You have to speculate to accumulate.

I don't think making stainless steel/polished parts would be the easiest way to make money, a lot of people already into that game.

Yeah Pinch,the steel one Mini Sport offer is folded all round,and has been creased diagonally both ways to form a cross. Its not much heavier than the alloy version,though it looks weak as a biscuit tin. They report it hangs lower than most,so it must have some 'give'. They used steel on the '68 Italian Job minis. They also burst a sump.

Annodising is another. And polychrome - chrome plating alloy wheels could be worth offering,it had a popular time in the US.

---

But i think there'll be more money in supplying other industries for the pw,like stainless tops for kitchens and worktops - especially with the raised hygiene now pushed into non-food factories.

untill you can start making them yourself, stop put comments about how i should. I'm making them for you, if you dont want one, dont comment. Its all about structure, i could make a sumpguard stronger than any ally one and it wouldnt weigh anywhere near twice as much.

Would your workshop contain a chroming kit of some description? :)

need to make some proffit, before i start buying equipment

You have to speculate to accumulate.

I don't think making stainless steel/polished parts would be the easiest way to make money, a lot of people already into that game.

I'm not doing this just to make money, its more of a hobby that can offer other poeple things they cant make themselves, so dont start lecturing me on how to make money. i dont care

As i've said and so have alot of other people would be interested in sump guards, as long as its strong i couldnt give a shit how much it weighs. Go for it m8 u sound as if u know what to do anyway without others telling you.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.