Skip to content

Panda's 9n Project

Featured Replies

Model: SE

Engine: 1.2

Suspension: AP Coilovers

Brakes: TT, incl rear disk conversion

Wheels and Tyres: TT Comps wrapped in 205/40/R17 Toyo Proxes

Exterior Styling: See below

Interior Styling: See below

ICE and Security: See below

Comments:

Figured it was about time I posted up some pics of my 9n project to show you the different stages and looks it's been through.

Here's how she was when I got my hands on her. Standard 2003 52 plater 1.2 SE spec :) with only 17k on the clock.

post-4828-1223717561.jpg

Next I decided the standard 14" rims NEEDED to be changed, so i took a trip down to my local VW specialist and came away with some fabia VRS rims, replaced the Skoda caps with VW ones and the car looked like this.

NewPic.jpg

Eww... standard ride height, so I bought some eibach pro springs.

Polo3.jpg

Also did a few other little mods at this point, ICE was installed in the form of a pioneer headunit and alpine components in the front and back, fitted in standard locations. This was finished off with a 10" Vibe active sub. The rear lights were tinted GT style and a chrome grille added. I also fitted my front fogs at this point too.

So the car looked like this at this point...

HendonBeach.jpg

Still not happy with the look of the car, I bought some new rims.

clean-3.jpg

mmm dish :)

Then had some colour coding.

ColourCoded-2-1.jpg

But.... she was still too high, especially to pull off these new euro style rims. So coilovers were ordered and fitted :)

Here's how she looked at VAG 08

VAG08-4.jpg

So.... I was happy with the exterior at this point... but the interior needed something.

TT seats and a nice OEM gear knob I think, not forgetting the TT pedals too.

Interior-2.jpg

Interior-3.jpg

I was happy for a couple of weeks at this point :)

Till I was offered these...

13072008002.jpg

I ran them for a week before I decided to change them

Comps-8.jpg

So they came off, fabia's went back on whilst I worked my magic on the comps!

13072008.jpg

No turning back now!

After a couple of weeks polishing and painting the inner spokes....

16072008001.jpg

Quite pleased with the results :) so tyres were ordered and fitted

Resized-8.jpg

This is how she's sitting at the minute, notice the genuine VW GT rear lights.... not cheap!

Artistic-10.jpg

Next up, rip it all to bits, respray, big brakes and a BAM conversion with a 6 speed LCR box. Standard KO4 mapped to approx 280bhp.

  • Replies 51
  • Views 26.9k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

nice, like the sound of the bam etc

my 9n's getting a full makeover over the course of winter.

I was wondering when this would turn up in the reader's rides

Liking the style keep it basic and minimalistic would suite :thumbsup: top marks on the alloys

  • Author

thanks guys, she's getting a makeover soon enough too! My mate lilmicky's gonna be doing a full shoot on the car, plus he's got some sick ideas for it. Keeping with the OEM kind of theme. I'm also thinking about a rear seat delete kit from a TT quattro sport.

  • 2 weeks later...

Loving this.

I wanna get some of these rims for mine.

Are these seats easy to fit in?

jimmy

  • Author

Hi,

the seats are not a straight fit. You need to make your own sub frames.

  • 3 weeks later...

Hi there! Nice wheels!

Does the GTI sideskirts fits exactly on the car? Doesn't they go a litlle bit off the car limits on the rear arch?

Hope you understand my doubt

Cheers

Loving the look of the car mate.... :-) specially the seats...

Hi there! Nice wheels!

Does the GTI sideskirts fits exactly on the car? Doesn't they go a litlle bit off the car limits on the rear arch?

Hope you understand my doubt

Cheers

The sideskirts fit exactly with no problem....well you'll have to buy the fitting kit as well from VW......basically the fitting kit comprises of two retaining strip, four adaptors, and self tapping screw......

No problem with the limits......no scrubbing or touching of the rear wheel.....

KJ

Thanks for the reaply.

My doubt is due to some other projects that i've seen, with the gti sideskirts a little bit off limits, like this:

'click'

p1020345or3fq2.th.jpgthpix.gif

  • Author

they fit like that on the 9n3 gti!

Mine fit exactly like they do on a 9n3.

love your polo, but I'm not a big fan of mk6

  • Author
love your polo, but I'm not a big fan of mk6

That's probably the best compliment of them all tbh :)

thanks mate. I've made a few little changes to the car and i'll post some pics up ASAP :)

  • 1 month later...

:)

post-11226-1230399552.jpg

post-11226-1230399564.jpg

post-11226-1230399661.jpg

dude, you need to find that pic that I took when i was in shauns car of yours rollin... get it up!! looks fucking sweet.

Polo looks class. Just wondering how much it costs to get that "colour coding" done??

Thanks in advance

what about all the latex glove mods?

what about all the latex glove mods?

lol

stop buyin skoda rims and actually go for the conversion rather than just buyin mr wood' bits

looking fresh mate keep up the good work just keep it simple works every time

  • Author
what about all the latex glove mods?

lol

stop buyin skoda rims and actually go for the conversion rather than just buyin mr wood' bits

bought some more non skoda rims now :) hehe.

Brakes are on, incl rear disk conversion.

Ain't really got an excuse other than money to not do the engine now.... especially when i get my company car in a couple months :)

  • Author

new winter rims to replace the fabia's

Artistic-5.jpg

new winter rims to replace the fabia's

Artistic-5.jpg

did ypu have to change your servo for the rear brakes

looking good matey.

I'm not a fan of the newer polos tbh but yours looks good regardless.

  • Author
did ypu have to change your servo for the rear brakes

Nah, servo is the same.

did ypu have to change your servo for the rear brakes

Nah, servo is the same.

cheers ain't change the servo on the polo for mine I'm running front gti brakes as well now need to put brake fluid and bleed the whole system this weekend hope it bloody works lol 8-)

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.