Skip to content

Roll Cage

Featured Replies

rite here goes, after a long time deciding me and my mate want to build a roll cage for my car. But the thing is i wnt it to b strong but not too heavy so what do people recommend to make it out of? thanks alot gaz

  • Replies 17
  • Views 1.7k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

wow u want 2 make 1 that takes some balls? well if u want strong but light u could always use alumiuim tubeing about 9/10mm thick but it wont b cheap

lol have you made a cage before?? it's a pretty mamoth task for a novice... especially one with not much welding experience/correct machinery etc.

it'll have to be made out of steel of course...

listen before i say any more... you'll really be better off getting one made. it'll fit better, look better, and do a better job. i mean, you have to bend bits of steel tube for gods sake... without the right machinary that's next to impossible to get right. your welds have to be spot on... not just tacked and crapped over. you'll have to make it perfect the first time, otherwise you'll end up buying more metal, using more weld etc...

how much are you looking to spend on your cage?? because seriously i think you'd be better getting one made.

titanium? blasted finish of course.

Show cage out of old exhaust tubing = fail been there tried it failed at it :D

because seriously i think you'd be better getting one made.

Know where you can get these?

Other then Safety Devices?

dont people use CDS or is that for subframes only?

CDS is the best thing for a roll cage, pretty sure it HAS to be CDS to meet FIA/MSA regs.

Forget aluminium if you want strength, alu cages are for show only.

there are loads of custom cage makers around the UK that will make something up to your spec.

I'm getting one for my mk3 polo from demon tweeks, £470 delivered

Show cage....just use scaffoling tube......50mil like

Show cage....just use scaffoling tube......50mil like

Not a good idea really, in the event of an accident its likely to cause harm if you randomly chuck a load of old piping in the back of your car

  • Author

well I've got the machinery an my mates a qualified welder haha

we was just thinkin bout drawin some sketchs up an seein how it goes first thn takin it frm there.

and its not going to b used in any events or anything like tht. just wntd ideas if anyone had made one before

thanks gaz

I'm getting one for my mk3 polo from demon tweeks, £470 delivered

What spec is it? Link?

i got 1 made 70 quid by some one who does banger racing , looks the dogs ,welded strait into car , not a cage built then instald , find you are local banger races save urself a packet

The last banger racer I spoke to built her cage out of box steel!!

The last banger racer I spoke to built her cage out of box steel!!

talk to a proper banger racer not a chav with a welder

CDS is the usual material to be used for a roll cage. (cold drawn steel) The other material used for MSA/FIA spec cages is CromeMoly 4130 tubing which is lighter and a fair bit more expensive!! Either, or will cost you a grand few pennies if done properly due to the fact that it is a black art to build a decent 'safe and proper cage'!! Many welders can build you a cage worthy of a show, but only a few can build you one of actually reducing the risk of injury or death in the event of an accident...

The last banger racer I spoke to built her cage out of box steel!!

talk to a proper banger racer not a chav with a welder

Would you class that roll cage as box, as its what alot of of banger racers use.

post-22004-1233418572.jpg

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.