Model: Polo 2001 GTI 6N2 5 Door Hatchback.

Engine: Standard With K&N Induction Kit, Alloy oil cap and Scorpion Letter Box Cat Back Exhaust.

Suspension: G-Max Springs & Dampers Supersport kit 40ml Lower.

Brakes: Standard.

Wheels & Tyres: Team Dynamics Pro Race 1.2 Black 16" with 195-40 Toyo Proxes T1R.

Exterior Styling: Smaller Aerial.

Interior Styling: Black VW Mats, Richbrook Gear Shift Surround, Gaiter & Shaft, Momo Sphere Gear Knob & Tinted Windows.

Ice & Security: Alpine IDA X001 Headunit, Pioneer Front Components, Pioneer Back Door Speakers, Vibe Amp, Vibe 6x9s, Vibe 10" Sub With Built In Amp & Dynamat Extreme covering Two Front Doors and Boot Lid.

Comments: Had this car three years now, was completely standard when I got it. Have made a few modifications to it and still continue to add small touches here and there.

Pictures:

Edited 3 October, 200916 yr by lebon

like the all black rims dude

like the all black rims dude

Thanks for the comment, much appreciated.

Some additional pics. Debadged polo Lettering to rear & Black VW badge at front.

Edited 24 June, 200917 yr by lebon

If I was you I would wire the iPod to the glovebox instead of having it hanging out. You don't need access to it whilst driving so may aswel hide it away? That's what I've done.

If I was you I would wire the iPod to the glovebox instead of having it hanging out. You don't need access to it whilst driving so may aswel hide it away? That's what I've done.

Never really thought about it before, but you've got a point. Ill have a look at that, try tuck it out the way.

hi just wondering what size door speakers you have got as I'm looking to buy a set and need to know what size to get. also how many channels do they have because I'm not sure about what they do

cheers

hi just wondering what size door speakers you have got as I'm looking to buy a set and need to know what size to get. also how many channels do they have because I'm not sure about what they do

cheers

Not 100% sure off the top of my head but I think there 6.5 inch or 16.5 cm, same front and rear. I have 220 watts in the front 180 in the rears and I have the fronts amped. Think there 2 way if thats any help, if you go to the forum section and put a post in the ice section I'm sure you will find someone with better expertise.

just bought some new door speakers and i was just wondering did you remove the whole door panel or the speaker cover to fit your new speakers many thanks

Looks ace matey i like it.

Removed the the Door cards at the front because I added new speaker covers, but if you are using the original ones you can pop them off without taking door card off. Thats how I fitted the rears, be careful tho I snaped a few of the plastic bits on the back of the covers, probably best to remove them.

Thanks for the comments.

Edited 9 March, 200917 yr by lebon

just had a look at the speaker holes and i think the speakers are bigger than the hole, shall i make the hole bigger

just had a look at the speaker holes and i think the speakers are bigger than the hole, shall i make the hole bigger

Bigger than the door card holes or the actual door holes them self.

Edited 10 March, 200917 yr by lebon

bigger than the actual door card holes so i cant remove the speakers

bigger than the actual door card holes so i cant remove the speakers

In that case your have to remove the door cards.

There is a plastic strip in the centre of the door handle, prize this off with your fingers or use a flat head screw driver, take care not to scratch the handle.

once thats off there will be a big screw to undo with a philips screw driver take that out.

Now move down to where the tweeter is, open the door wide and you should see another screw at the front edge of the door card.

undo that and work your fingers around the door card gently pulling it to unclip the poppers holding it on.

Once you have done that pull the door handle and lift the door card off, over the central locking pin.

on the drivers side door there will be two wires attached for the electric windows and mirrors, just unclip them and there you go.

passenger side has just got one wire for the window to unclip.

Hope this helps.

Edited 10 March, 200917 yr by lebon

cheers for the help

thats well nice mate fancy a str8 swap with my valver u no u want to!!!!

Edited 10 May, 200917 yr by rosshall22

thats well nice mate fancy a str8 swap with my valver u no u want to!!!!

Thanks for the offer Lol.

Nice one for the comment tho :)

Original wheels are back on as the tyres have worn on the other set, used the oppurtunity to have a change.

I have refurbed the rims and had one of the centres sprayed, swapped the grill badge back to silver and removed

the front door tints after hassel from the cops.

Are you putting the multispokes back on? I thought it looked good on them, bit of a change from the norm. But not in a bad way

Are you putting the multispokes back on? I thought it looked good on them, bit of a change from the norm. But not in a bad way

Will put them back on eventually, but for now I'm happy with the bbs rims. The tyres on the others are worn on the inner edges, but rather than shell out for new ones. I just put the original wheels back on for a change, need to get the tracking done really as the last set had uneven wear.

Edited 10 November, 200916 yr by lebon