Skip to content

whats the fastest 90-94 polo gt

Featured Replies

  • Author
Yoof's old GT made 100bhp on ITBs before the ignition was mapped, with that done was probably nearer 120bhp. Spec was ported head, 268° cam, 4-branch, Megasquirt and ITBs. We never finished developing that setup as he went turbo - which was a shame in some respects!

Previous to that he'd used the same engine (no ITBs) on Digifant and made around 96bhp - plus 80bhp of nitrous. That was good for a 15.4s quarter mile - comparable to a chipped and pulleyed G40.

woow can i ask what ITBs and megaquirt are?

ITB: Individual throttle bodies

Megasquirt: Standalone fully programable ECU - Iginition times, fueling etc

nice one kerrly are them ECUs any good?

  • Replies 49
  • Views 3.8k
  • Created
  • Last Reply

Top Posters In This Topic

Google search Megasquirt, there are LOTS of websites about it. It's basically a DIY aftermarket engine management system. You can buy them as a bare PCB to build up yourself if you want, or you can buy ready assembled ones. Then once it's all done you need to map it to suit your engine which is where the problem lies really as there's not a great deal of information about on the best way to map it for a polo engine, just means you have to do your own homework and spend a lot of time on it. If you are thinking it'll be a quick and easy way to a bit more power then you will be very wrong!

my spec is:

1992 GT with 96K

pipercross viper induction kit

stainless steel full system

golf GTi AFM

8K chip

i think "magnitex" HT leads ? those thick ones

id like to get a 4branch manifold at some point and p+p my head and perhaps bike carbs - but thats me dreaming.

this has put into perspective how little engine mods my car has compared to others :shock:

no idea what BHP that is, any guesses ?

P.S. adrenalinseeker (sorry mate i cant remember you name?) whats the spec of yours so far ? did you get the AFM set up in the end ?

Edited by jimmy7

GT injectors are fine for what most people are going to tune them to, i'm using GT injectors on my 1.6 with a chip and its not melted yet so I guess its okay :lol:

Thats the thing with GT's they lack torque so much, I really carn't see the point spending alot of money on them.

my old gt was pretty quick that did 0-60 in about 8 secs and i had about 130 out of it :)

  • Author
P.S. adrenalinseeker (sorry mate i cant remember you name?) whats the spec of yours so far ? did you get the AFM set up in the end ?

at the end of the weekend i should have:

pipercross viper induction kit

longlife stainless steel full system+ 4 branch

golf GTi AFM

8K chip

de-wegded tb

272/272 newman cam

GT injectors are fine for what most people are going to tune them to, i'm using GT injectors on my 1.6 with a chip and its not melted yet so I guess its okay :lol:

Thats the thing with GT's they lack torque so much, I really carn't see the point spending alot of money on them.

theres alot more torque than my 1ltr so I'm well happy and if i come into some money i will probs put the deisel W1 bottom end on it i think that will fit without a problem.

sounds like a good spec man, viper kits are silly expensive tho...

  • Author
sounds like a good spec man, viper kits are silly expensive tho...

brought one for my gti afm last week £26 posted on ebay i love a good deal, its secondhand but in better condistion than my gt one :lol: (which will be up for sale soon people).

fuck man thats mad, mine was £179! and i had to bodge it onto the golf AFM, its only held on by one bolt!!

fuck man thats mad, mine was £179! and i had to bodge it onto the golf AFM, its only held on by one bolt!!

You paid £179 for an air filter?

technically no. it was on the car when i bought it, but I've got the reciept for it!

id never waste that kind of money on an induction kit personally.

  • Author

jesus i thought they were around the £100. i cant wait to get mine RR'ed with my new spec i want iit to have 100bhp, well I'm hoping

youve got a pretty impressive spec dude, i think you could push for 100BHP, i wouldnt mind getting mine done, but i want to be happy with it first.

Sounds like we will have to get a few cars together for a Rolling road session.

i was under the impression they were a bit better?

i got told by someone they were a bit bigger?

probs just one of those things that someone just came up with as g40 are faster and therefore its down to the injectors :-p

no idea on bhp for mine but it ran something like 17.2 seconds at santa pod.

i feel slow with roughly 11 seconds 0-60 with jus an induction kit lol

90Bhp

With this spec:

8k chip

Ported, dewedged throttlebody and derestricted elbow

Golf GTi AFM with K&N cone filter

Stainless 4 branch, standard G40 mid-section and custom backbox

I also run an oil cooler and oil catch tank, though any performance gains in terms of power from those are negligible if any.

0-60: 9.29

Quarter mile: 17.2

(Above times were at the quarter mile sprint at GTi International 2007)

Having driven GTs with a cam added to the above spec, or a ported head, the most notable difference is to top end. They seem to pull better at motorway speeds and acceleration up to the standard redline is much more brisk whereas is slowly tails off with a standard cam or head. In due time it's something I'd like to add to mine along with a 1.4 bottom end to try and give some torque.

Anyone know if there is going to be a CP RR day this year?

Unless I've missed it that is.

Edited by Tommo32

  • Author

yes we should and karls the one to ask.

karl can we have a RR day this summer?

my old gt was pretty quick that did 0-60 in about 8 secs and i had about 130 out of it :)

what mods

have to be getting on for g40 bhp to get 8 seconds

mines got

schrick 268 cam

mk2 afm

de-cat

full s/s system ashley

8k chip

got told about 95bhp :)

  • Author

iv PM'ed karl about a rolling road day 8-)

iv PM'ed karl about a rolling road day 8-)

Sweet. I would be at that for sure.

Cool better get my engine finished and In the car then. :-D

Edited by spiket4

Anyone know if there is going to be a CP RR day this year?

Unless I've missed it that is.

Afraid you have missed it. It was held late January as per previous years. Still, gives you some time to get things in order for the next one :lol:

Guys I'm simply not prepared to organise events at the drop of a hat. Unfortunately from your side of the fence you don't see how much organisation even a rolling road day takes. I don't want to take time out of my own free time which in itself is limited to organise something for an event where 30 people said they would come along on the forum, but when it comes to the day 3 turn up, as unfortunately this has happened too many times before at other events.

The only feasable way this could go ahead was if a deposit was taken from the first 25 people to put their name down to ensure that at a minimum 25 people turned up warranting me going to the effort of sorting everything out.

Please also note it would be logistically hard to keep everyone happy due to their location. I would only really be happy using Aldon Automotive in Birmingham as we have a good relationship with them from past years events, and their rollers are very accurate. This in turn might make getting the numbers required hard.

I will repaeat what I have said to Ateve (AdrenalinSeeker). If a group of you living locally want to arrange something off your own backs, post up about it on the forum and be resposible for the running of it, then by all means go ahead. However, it would be on the understanding it wouldn't be an official Club Polo event, and you would be resposible wholely for it.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.