wellys yours is one of the best sitting 6n2 I've ever seen tbf mate

and all these polos 0n 13s have no stance whatsoever there just low

JACKO.

wow! cheers mate really appreciate that. i still think there is more to do tho..space the fronts about 5mm and get the rears out maybe another 5mm or 10mm? opinions guys?

naaa man looking at these pics the rear sits spot on hellaflush boiiii

id say space the fronts 5mm and it will be perfect matey all about flush fitment :-)

JACKO.

do you think?? maybe i should just wind the coilies down some more at the back? but then the car will be sitting almost level, and tbh i always like a slightly nose down stance...

so just the front 5mm guys?

oh and cheers mate :)

Ed

bit of self whoring

that'll do for now, dinner is ready!

Olly

i would also like to bring the front down a touch more but i dont think its possible on a daily basis

this was taken on the flatest ground ever. so you can imagain what its like on cambered roads

do you think?? maybe i should just wind the coilies down some more at the back? but then the car will be sitting almost level, and tbh i always like a slightly nose down stance...

so just the front 5mm guys?

oh and cheers mate :)

Ed

ye man got to have a bit of nose down :-D but i reckon the back is sweet as it is dude

you got any side on pics matey ?

JACKO.

craig ran 14 inch steffan bcws IIRC

ahh my bad, i know it was some thing pretty small though cause i remember him saying he had to keep his standard brakes

i always mention this to him and he always tells me NO... i ran uprated pads! :lol:

if someone could find me a couple of pics that would be brilliant :) cheers guys

finally after about 4 attempts at searching for it i've found one

is this not the stance thread ?

yhhhh here you go man, and i promise this is the last of the self whoring, i will delete if anyone has a problem, just needed a quick bit of advice :)

pics not working heres a quick link to my thread page http://www.clubpolo.co.uk/forum/index.php?...5276&st=400

Ed

finally after about 4 attempts at searching for it i've found one

cheers mate really appreciate that. to be fair that is low for a polo 1.8t. makes me feel it can be done.

any idea what sort of power he was running? must have gone through driveshafts like biscuits

Ed

yhhhh here you go man, and i promise this is the last of the self whoring, i will delete if anyone has a problem, just needed a quick bit of advice :)

pics not working heres a quick link to my thread page http://www.clubpolo.co.uk/forum/index.php?...5276&st=400

Ed

does sit good that fella very good

ye id space the fronts between 5-10mm

JACKO.

cheers bud, I've got some 5mm spacers already to go on the fronts for the show season. so next year the stance should be getting somewhere..

nice one jacko

oh and joshy polo your girlfriend looks less then impressed with the situation you were in!haha

thats whys shes an ex moany bitch!

Shocks and springs only, bags are for girlies. (Saying that, so are coilovers, you can wind them back up if you're gay!)

90/90?

Shocks and springs only, bags are for girlies. (Saying that, so are coilovers, you can wind them back up if you're gay!)

my old wheels

Off a renault isn't it? Laguna or something like that, they have those kind of ones...

looks like a laguna splitter to me, could well be wrong though

oh and joshy polo your girlfriend looks less then impressed with the situation you were in!haha

thats whys shes an ex moany bitch!

haha!! my missus moans all the time about the car being 'too low' women!! :p

Edited 30 October, 200916 yr by wellse6n2

Shocks and springs only, bags are for girlies. (Saying that, so are coilovers, you can wind them back up if you're gay!)

90/90?

100/80 (We reckon)

my old wheels

True true!

looks like a laguna splitter to me, could well be wrong though

Na its no laguna 1

looks like a laguna splitter to me, could well be wrong though

Na its no laguna 1

Could be a clio one? Looks pretty similar to the one on my mum's clio...

wellse6n2 you need to give your chassis a notch....it looks dangerous!!! sick stance though....I just remember my drive shaft looking like yours on my 6n, its used to knock all the time. It pissed me of so much I took the grinder to the chassis and made some room! made such a difference to everyday driving!! :thumbsup:

cheers mate really appreciate that. to be fair that is low for a polo 1.8t. makes me feel it can be done.

any idea what sort of power he was running? must have gone through driveshafts like biscuits

Ed

don't think he got a chance to find out mate, the car had a nasty nasty end

i would also like to bring the front down a touch more but i dont think its possible on a daily basis

this was taken on the flatest ground ever. so you can imagain what its like on cambered roads

meh...

stop being a pussy

Lets see your stance then ?

Everyone has there own view on stance!

This is not stance to me! Some people may think it is

Standard ride height - !4" P-slots

Edited 31 October, 200916 yr by Luke_mk3

wellse6n2 you need to give your chassis a notch....it looks dangerous!!! sick stance though....I just remember my drive shaft looking like yours on my 6n, its used to knock all the time. It pissed me of so much I took the grinder to the chassis and made some room! made such a difference to everyday driving!! :thumbsup:

its definitely on my list of things to do man..knocks so so bad :(