I just made one of these today for Mr GrungeisYousaf for his AFH converted mk2. He kindly gave me a template to use, so I am now able to make them to order for this engine. If anyone is interested please drop us a PM. This one was to suit CBR600 carbs, but pretty much any carb setup can be made for, let me know what you need :-) Once again I currently have enough material for about 3 or 4 more.

Saf also took some pics of me in action lol

And here it is fitted to his engine;

Due to the work needed to get the ports the correct shape for this engine, I'm asking £100 plus postage. They are made from mild steel.

Cheers,

Arun

Edited 15 April, 201016 yr by Phataz1

are these port matched then? can you tap them for vacuum? could be interested in replacing mine

cheers!

the fella who bought my AFH arosa will be after an inlet mani - i'll send him your way when he's ready.

Olly

Yeah dude they are port matched, I was rushing to get it done before it got dark so didnt have time to get pics of the ports.

Thanks guys :)

these are top notch i can vouch for this as i bought one for my gt

can you tap each port for vacuum for my dizzy (3mm ID), and have a port for my brake servo (10mm ID)? might be easier to get you to just make me a new one instead of modifying the one i've got.

cheers

these are top notch i can vouch for this as i bought one for my gt

No way! I was wondering how you were getting on with it Gaz! Glad you're happy with it :-)

Thanks

can you tap each port for vacuum for my dizzy (3mm ID), and have a port for my brake servo (10mm ID)? might be easier to get you to just make me a new one instead of modifying the one i've got.

cheers

Hey dude, I'm still struggling to find sutable pipe for the dizzy take off and I don't have a tap and die set. Brake servo take off is no probs, I already have the pipe needed for that. If I can find some pipe I'm happy to sort your existing manifold, I'll let you know. But if your dead set on a complete new one then thats fine too.

yeah, no worries mate. i'm easy either way. my current manifold has got the vac for the brake servo already. I'm running without vac advance for now, but would like to get it sorted at some point.

Hi, will these fit my 1974 plymouth barracuda? or do they need modding?

Cheers

N

yer its spot on mate i did little modifying to match the ports only cos i over bored them when i ported and polished the head but pulled real hard on the rolling road and produced 90bhp at the fly wheel not bad to say its suposed to be 75bhp standard

thanks alot for making it mate

i like the way you've tacked it onto that piece of box section to stop the heat from warping it. nice idea

hi was wondering how much for a manifold for gt to run cbr 600 carbs and were can i run the brake servo vacuum and vacuum for the dizzy?? is there a point on the manifold u make for this?? cheers ben

PM'd you Ben

Some pics of the latest AFH ones;

Arun

Alright dude, you still making these? Will be after one to fit a set of gsxr600s onto an AFH if you're up for it

Cheers

Edited 15 May, 201016 yr by inked sloch

hi pal do you mind if i pass your details on to a lad who iv just sold some carbs to he after a manifold making for a gt with the same carbs as me but they are slightly diferent in the spacing between the carbs?

cheers

gaz

hi was wondering how much for a manifold for gt to run cbr 600 carbs and were can i run the brake servo vacuum and vacuum for the dizzy?? is there a point on the manifold u make for this?? cheers ben

I've got exactly the same question as Ben! How much would a manifold be for a set of CBR600 carbs on a GT? Cheers mate.

Hi everyone, I'm just in my last couple of weeks at university at the mo so I'm too busy to make any right now, but as soon as I'm finished I'll PM all of you who are interested :)

Thanks,

Arun

i shall be wanting one of these soon, so ill give you a shout when i get the carbs :)

To ensure perfect fitment I'm having flanges water cut this week for both the 1.0/1.3 and AFH engines, and I am available once again to start making these manifolds. If anyone is interested in a manifold to their spec, drop us a PM :)

another happy customer!!!

Legend Az... just added one more brap-tastic polo to the collectin!

Port matchin is absolutely spot on!

Highly recommended... unbelievably cheap too!!

Thanks a lot Ad :)

I'm using water cut flanges now

they look dope! may have to hit you up for one of these... thinkin of changing the set up on my mk1...

hi pal how much do you charge for the afh manifolds?

have upgraded my cylinder head to a 16 valve one so i need a new manifold now lol

cheers

gaz

As of tomorrow I will be set up to make these manifolds in stainless or alloy, please get in touch if you're interested. Price is yet to be confirmed but I expect it to be around £150 :) They will be TIG welded.

Edited 27 October, 201015 yr by Phataz1