Skip to content

bumper strips and bringing to a shine.

Featured Replies

i had a dent in the side of my mk4 so i filled it sanded it primer paint and lacquer, i had to remover the bumper strip now I'm wondering what is the easiest way to remove the glue residue and bring my spay work to match the rest of the car (if that is possible, I'm not a pro sprayer)

post-26432-1272466846_thumb.jpg

post-26432-1272466888_thumb.jpg

post-26432-1272466952_thumb.jpg

post-26432-1272467009_thumb.jpg

post-26432-1272467051_thumb.jpg

  • Replies 9
  • Views 1.6k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

I did this the other day mate! Hair dryer and credit card is order of the day to get the majority of it off (dont get it too hot though cos you are new paint might bubble!) Then white spirit and t cut! To get the laquer shiny again- If you've got and runs or anything then sand with wet and dry (2500 grit), keep the paper super wet cos it will load up really quick AND USE A BLOCK OR FLAT HAND! If you do it with you are fingers or too much ul cut the laquer and then u gotta spray it again! If the laquers already all good then u need a rubbing compound, a drill and a buffing pad. Use it just like polish but only on the area uve sprayed and again keep it really wet or the paint might bubble. And dont press too hard, just let the rubbing compound do the work! After a while ul see the laquer start to get shiny. Do this right to the edges and it should blend in perfectly with the existing paint work. Hope this helps! Dan

Fudge wheel and cutting compound to remove your glue residue

i used petrol in the end,let it soak in then pushed the glue off with my thumb,worked a treat

TAKE CAUTION IF YOU DO THIS AS IT IS FLAMMABLE!!!! :lol::lol:

i used petrol in the end,let it soak in then pushed the glue off with my thumb,worked a treat

TAKE CAUTION IF YOU DO THIS AS IT IS FLAMMABLE!!!! :lol::lol:

I did it with my thumb at first and now i got a fuck off huge blister! :x

i used petrol in the end,let it soak in then pushed the glue off with my thumb,worked a treat

TAKE CAUTION IF YOU DO THIS AS IT IS FLAMMABLE!!!! :lol::lol:

I did it with my thumb at first and now i got a fuck off huge blister! :x

ahhh,you must have the mild green fairy liquid thumbs lol

my hands are like leather :-)

This isn't really about your car but to take my side bump strips off I can just heat them up with a hair dryer, pull it off and then there will be glue left on I can peel off with a credit card and bobs your uncle?

This isn't really about your car but to take my side bump strips off I can just heat them up with a hair dryer, pull it off and then there will be glue left on I can peel off with a credit card and bobs your uncle?

Glue is a pain in the nuts to remove in my exp. the best way is with a razorwheel like as said above somewhere, but if u dont have one, i found the credit card method and wd40 with a dry cloth works pretty well

auto glymm tar and glue remover works a treat i used this removing a whole vinyl which left glue was real goo d:)

  • 2 weeks later...

thank you :D

thats great help, ill get on it on friday

i'll try and get the paint matched and post up a pic cheers for all the info dan!

and get the other filler sprayed!!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.