Skip to content

Finding parts for Mk2 Polo

Featured Replies

Hi all, First Forum joined and first topic.

I have recently bought a Mk2 Polo :thumbsup: as a replacement for a Mondeo 2.5 V6 twin turbo :thumbsdown: .

I was wondering, where can I find the following:

Deep dish 14" Alloys

Eyelids

Lowering springs

Single/Twin Exhausts

Splitter kit

Pressed plates.

Any suggestions or comments would be greatly recieved. Thanks so much

post-36301-1278286550.jpg

  • Replies 8
  • Views 1.3k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

I was wondering, where can I find the following:

Deep dish 14" Alloys

Eyelids

Lowering springs

Single/Twin Exhausts

Splitter kit

Pressed plates.

Alloys - check eBay if you know the stud pattern/et information :)

Eyelids - no idea where to look for these

Lowering Springs - check eBay for some :thumbsup: or if not - check Venom Motorsport ( http://www.venommotorsport.com/ )

Single/Twin Exhaust

Splitter Kit - no idea about these either I'm afraid

Pressed Plates - there are loads of companies that do them, google will find them for you - but there is a company that makes some that are completely road legal (most are classed as 'show plates' so you can get pulled/fined for them)

Hope this helps :)

:grin: as for wheels be carfull what you buy as rear arches are rather narrow and may need work,do some research first.lowering springs check out philj on here he has some good stuff.

  • Author

Cheers guys,

The wheels are Four studs but I don't know what the stud distances are, and how do you mean work done. As in, widen the arches a bit?

Lowering springs I have found on www.europerformance.co.uk

Eyelids and splitters are still an issue.

Exhausts? Hell, that is doing my swede in.

Any help from anyone else is highly appreciated. I have always had fords and own a mk2 mondeo with 23000 in it. But VeeDubLuv is the way I want to go lol.

Cheers guys,

The stud pattern you will need to look out for (i think) will be 4x100 then. 4 stud which are 100mm apart. Quite common and some nice wheels out there :thumbsup:

The arches will possibly need to be rolled or have part of the liner cut out to allow the wheels to sit properly and not rub against anything :)

Glad you found your lowering springs.

Eyelids and splitters - i would say take a quick look on eBay - its amazing what you find on there :-D

Exhaust - unless you can find one on eBay, it might be worth (depending on money) getting a custom one done.

  • Author
Eyelids and splitters - i would say take a quick look on eBay - its amazing what you find on there :-D

Exhaust - unless you can find one on eBay, it might be worth (depending on money) getting a custom one done.

Ebay isn't going with a lot just now though I am sure soon there will be splitters and eyelids.

Exhaustwise - I wam thinking of putting a 4 to 1 manifold and splitting it at the middle pipe to have a single pipe on each side with something like a corsa VXR back box on each for a nice low rumble.

eyelid ..nearest thing is probably a grille spolier , not that popular these days

splitter...what did you have in mind , not sure its really the kinda car to make splitters work tbh, but good luck

as for the exhaust , id go for a custom one

Just keep an eye out on the for sale section on here, 4-2-1 manifolds crop up reasonably often but like people have said, custom is probably the way to go, either that or try ashley exhausts, they do a cat back for about £200 which seems ok although i havn't heard any reviews or comments from anyone about them.

Also as people have said, be careful about what springs and wheel/ tyre combo you go for, I've got a bready same as yours and i get arch rub pretty often and its only lowered 40mm.

Hope this helped.

  • Author
eyelid ..nearest thing is probably a grille spolier , not that popular these days

splitter...what did you have in mind , not sure its really the kinda car to make splitters work tbh, but good luck

as for the exhaust , id go for a custom one

I think the grill spoiler looks heated on a nice dark coloured car, I am thinking of having it resprayed either a pearlescent white though or a bronzey brown kind of colour. I shall make it work lol.

Just a small front splitter and a nice simple colour coded bumper, any ideas where to go for Body work? as STX styling are turd.

Cheers.

Just keep an eye out on the for sale section on here, 4-2-1 manifolds crop up reasonably often but like people have said, custom is probably the way to go, either that or try ashley exhausts, they do a cat back for about £200 which seems ok although i havn't heard any reviews or comments from anyone about them.

Also as people have said, be careful about what springs and wheel/ tyre combo you go for, I've got a bready same as yours and i get arch rub pretty often and its only lowered 40mm.

Hope this helped.

I was going to buy a set of 60mm lowering springs and throw a set of deep dish 14's on it or nice lambo imitation wheels. I haven't bought the car, that is just an example by the way.

I think custom exhaust is how I am going to go to be fair.

Cheers

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.