Got a breadvan we can play with Kiz...

Got a breadvan we can play with Kiz...

Dont start that again - wev just managed to persuade you to stop with it

pmsl

I've never excessively lowered mine, not my cup of tea, this is as low as i ever took it (have since raised it to a comfortable 50/20).

Still looks pretty low though with the tyre choice. It would look even better if them hocks were given a re-furb, and some lower profile tyres.

We need pics of yours man.

Polominges square block is killing it off with the rear stance, I hope and prey he can match it with the front

http://www.theminiforum.co.uk/forums/topic...ge/page__st__15

this one is better though

http://www.theminiforum.co.uk/forums/topic...__fromsearch__1

as its sits right now- sorry for the shit pic, its the only recent one test fitting my rear flaps

going to attack the front suspension on Thursday weather permitting and get it down a little more

just want the chassis running level with the ground it cant be that hard to get surely!

I garentee some of the cars my oldest brother used to run were lower ...

Mind that he did have a wierd fettish with angle grinders and standerd springs... take into account he only had these for about a month or two haha!!

wanna bet on that?

having seen the set you have at the RR day, there what i use them bodies but tobys set are not the same as them and the body is 10mm shorter- so with that in mind he will beat you by that amount if he removes his helpers.

the fact your arms are 5-6mm lower down means nothing as with the helpers removed and bump stops the springs aint long enough to take up the gap = strut hit top cap. his hits 10mm lower.

sorry - you lose!!!!

lets the games begin

Due to my measuring based fail I'd say his arms are slightly more than 6mm lower

I'm not after the lowest, I'm just after the best possible stance, i want it to look good.

However, i will for atleast one show take it to the limit just for the fun of it.

Has to be a show that your at i guess ben

i'll prob roll around -90mm. needs to be (slightly) drivable,

Mine must be atleast 90 dude, not low enough by far

I think your bready's bout same as my coupe bshaw.. i cant remember if i have bump stops in lmao

fitted them ages ago and i wasnt fully in the know then :/ lol

Thing is it doesn't really matter who's coilies will go the lowest because you won't be able to take them all the way down without a proper chassis notch anyway. Both of yours go a good inch lower than mine and I've already got drive shaft shaped dents in my chassis legs and I've still got over an inch of thread left to go

Notch is on my shopping list

New generation of low polos, all thanks to Kiz and Guy being genius's

Don't blame me I just copied Kiz

But yeah early polo's will now be able to run as dangerously low as golfs and later polo's which can only be a good thing imo

Edited 6 February, 201214 yr by Mclovin

Guy , what ever happened to your guide on home brew coilovers i cant find it .

But Guy, you inspired other like-minded pikeys to do the same

Deleted blud

I removed it after hearing that you wanted to make a set

I removed it after hearing that you wanted to make a set

Is this for my own saftey ..

Get it back up you homo . I wanted to check something . :) thankyouplease..

Can't get it back up, its deleted

But yes it was for the safety of some of the people pm'ing questions about them, things were getting very out of hand

Edited 6 February, 201214 yr by Mclovin