Hahahahahaha 3 weeks to get this finished and painted?? have you got the loom everything ready to go in? think you better book some more holiday from work mate =D

Lol I think I'm going mad thinking I'm going to finish it haha!

Nope....got most of the 6n2 loom lined up in the car etc but nothing even wired in :/

i'm in a similar situation for UD, bora bay is bare, mainly prepped for paint etc.

i built the engine last week but still need custom made

mounts

fmic

boost pipes

cam cover

header tank

brake lines

clutch line

catch can

turbo intake

turbo snail

wiring loom

fuel lines

fpr set up

paint the bay and various other engine parts etc - think i'm mad

3 weeks?! dam didnt realise you were that close?!

i dont think you did either!

well fingers crossed mate. hope it all comes togerher. keep up updated!

Fuck me Harry your cutting it close, the guy from UD (dean) said i could have a place outside too but i dont want to rush it because ill see me doing something wrong... hope you get it done mate ill see you up there :)

3 weeks?!

i'm in a similar situation for UD, bora bay is bare, mainly prepped for paint etc.

i built the engine last week but still need custom made

mounts

fmic

boost pipes

cam cover

header tank

brake lines

clutch line

catch can

turbo intake

turbo snail

wiring loom

fuel lines

fpr set up

paint the bay and various other engine parts etc - think i'm mad

Sounds like your as behind as me lol.....You got a place inside I suppose?

3 weeks?! dam didnt realise you were that close?!

i dont think you did either!

well fingers crossed mate. hope it all comes togerher. keep up updated!

Haha nope I didnt :/ I could of had it done by now if I had worked hard on it at the start lol.

Fuck me Harry your cutting it close, the guy from UD (dean) said i could have a place outside too but i dont want to rush it because ill see me doing something wrong... hope you get it done mate ill see you up there :)

Lol if I dont make it, I wont be far off so I will make a trip up and take you out to give you some inspiration to finish yours :p

Edited 14 February, 201214 yr by haz911

3 weeks is a short space of time but if u can do it that will be sweet to see it up there :) I know not gunna be ready so ill prob be rocking up in a gay mini :/

3 weeks is a short space of time but if u can do it that will be sweet to see it up there :) I know not gunna be ready so ill prob be rocking up in a gay mini :/

Lol I'll try :) just do much to do and a few of them are waiting on companies (driveshafts mainly) so might have to make them myself just to get it done then swap them afterwards!

Haha what you doing to yours? Still trying to find some wider dishes?

The time frames easy...my cars still a patchwork of primer and I still need to repair the sills, paint it, polish it and build up with the stock pile of parts of collected over the last few weeks haha.

The time frames easy...my cars still a patchwork of primer and I still need to repair the sills, paint it, polish it and build up with the stock pile of parts of collected over the last few weeks haha.

Lol mines basically a shell at the moment, nothing inside or in the bay....I would love for my car to be in primer and have 3weeks to do it lol!

Good luck :)

I've had no interior in the back since my central locking started playing up if that counts.

The question is, why do we do it haha.

Haha I'll count that....won't take long to put back in though on the interior, I still got to make some custom subframes for the new seats too :(

No idea!! Haha costing me a fortune and so fucking stressful! Lol

Thats a deal Harry! :) my first show in it will be Spring Fest at Santa Pod 22nd April. You should make a trip up to that and we'll sort it out on the track

might have to make them myself just to get it done then swap them afterwards!

I've seen your welding, please dont

Haha it's good now :) got the gas sorted lol.

Thats a deal Harry! :) my first show in it will be Spring Fest at Santa Pod 22nd April. You should make a trip up to that and we'll sort it out on the track

Yeah I'll be there haha

might have to make them myself just to get it done then swap them afterwards!

I've seen your welding, please dont

Haha it's good now :) got the gas sorted lol.

Good good, next time your out get a pic of a proper weld then

I've already plated up and fibreglassed around the actual engine mount lol......I will weld something else :)

Updates

Been spending my evenings this week killing the ends of my fingers from sanding this bay :( its all paid off though and should be in primer by Midnight tonight and then colour tomorrow.

Pics to follow :p

EDIT - P.S. Some Welding pics to come just for you Ben

Edited 17 February, 201214 yr by haz911

Looking forward to seeing this mate

Looking forward to seeing this mate

Cheers :) been keeping an eye on yours too :p

Spent a good few hours with 2 mates on the car last night till about 1 and still no primer :(

Had to make a few adjustments to the pedal box and cut a hole in the bulkhead for the clutch cylinder to come through and also weld up the clutch cable hole - As usual it took longer than expected lol.

Got a few bits to do on the pedal box and get the cylinder through the new hole this morning then we can hopefully start painting by this afternoon :)

Edited 18 February, 201214 yr by haz911

Liking the progress, have a mental thought of everything that needs to go through before paint eh! Such as extra wires/cables, last thing you'd wanna be doing is drilling around fresh paint or cracking your fibreglass and such!

Keep up the hard work, looking forward to updates

Very similar to what i was gonna say, take your time and get it right first time, I know you have a deadline but itd be worse if you had to keep redoing things or something happened

So yesterday managed to get the Audi Gear Shifter and linkage modded to fit the Polo and its sat nicely :) just need a slight bit of modding to screw one of the studs up - Cheers for help Daryl

Also my other mate was up and started prepping the bay and managed to put it in primer :) - Cheers Trigger

Underside of the car is pretty battered...

Cut a nice hole for the clutch cylinder

Guide code before sanding down with some finer grit :)

Few pinholes etc but have got rid of all of them tonight and given it another coat - Will need flatting back again tomorrow after work then can be put in colour :)

Edited 20 February, 201214 yr by haz911

Damn good job fella....what colour you going?? be nice when its filled with a 20vt =D

Damn good job fella....what colour you going?? be nice when its filled with a 20vt =D

Cheers man! It's going same colour as the car :)