good progress bro, bay looks really nice now its out of the dark! will defo come down soon and check this out :) x

Cheers man, yeah when you saw it the other day in the garage it was hard to see (Shity light!) - Going on Holiday tomorrow for a week so will have to come up in a few weeks when its almost back together :)

Look sweet Harry can't wait till you take me out in this

Cheers :) Haha

Done it yet bro?

Done it yet bro?

Haha not yet man.....I'm sat at the top of a mountain in france playing in some fresh powder :p back Saturday!

Edited 20 March, 201214 yr by haz911

Done it yet bro?

Haha not yet man.....I'm sat at the top of a mountain in france playing in some fresh powder :p back Saturday!

You bastard...i dont go on holiday until May 2nd :( Greece with the Mrs

Done it yet bro?

Haha not yet man.....I'm sat at the top of a mountain in france playing in some fresh powder :p back Saturday!

Checking the build thread on top of a mountain = dedicatedLAD

Done it yet bro?

Haha not yet man.....I'm sat at the top of a mountain in france playing in some fresh powder :p back Saturday!

Checking the build thread on top of a mountain = dedicatedLAD

Haha not cheap either just aswell its a company phone lol

Cut and extended one side of the ECU loom by 4ft - Just need to put it through the inside of the wing and then solder it all together and wrap the loom up :)

Also:

Wheels are painted and the dishes have been sent of to Mike the Polisher

Starter Motor Re-Painted

Shifter Tower Painted

Ordered a different Inlet, injectors and fuel rail

Edited 27 March, 201214 yr by haz911

Done it yet bro?

Haha not yet man.....I'm sat at the top of a mountain in france playing in some fresh powder :p back Saturday!

Checking the build thread on top of a mountain = dedicatedLAD

Haha can't help it - Miss it now the sun has come out :(

need any more help anytime soon?

d.

need any more help anytime soon?

d.

Anyones hands are much appreciated quicker its done the better! I miss it :( lol.

What injectors you gone for?

What injectors you gone for?

I've decided to swap my inlet setup for the BAM inlet, injectors and fuel rail....also means my throttle body will be on the right hand side and it will neaten up the boost pipes etc were they will be running :)

Lookin sweet now mate, can't wait to see it finished

What injectors you gone for?

I've decided to swap my inlet setup for the BAM inlet, injectors and fuel rail....also means my throttle body will be on the right hand side and it will neaten up the boost pipes etc were they will be running :)

Thats the main reason I've got for the BAM inlet mate

Looking good anyway mate, just doing my interior loom at the minute and been fucking about with my slam and lights :)

What injectors you gone for?

I've decided to swap my inlet setup for the BAM inlet, injectors and fuel rail....also means my throttle body will be on the right hand side and it will neaten up the boost pipes etc were they will be running :)

Thats the main reason I've got for the BAM inlet mate

Looking good anyway mate, just doing my interior loom at the minute and been fucking about with my slam and lights :)

inlet etc all fitted and it makes it look a lot better now.......you almost done? All these posts I see on facebook about Pearl you must be nearly done

Dishes for wheels are back from Mike the Polisher centres painted and got some nice new bolts to put them together with!

Also extended a lot more of the loom and it is all hidden inside the wings.

Driveshafts will be ordered first thing tomorrow as well

Getting close now pics to follow this weekend

Edited 3 April, 201214 yr by haz911

What injectors you gone for?

I've decided to swap my inlet setup for the BAM inlet, injectors and fuel rail....also means my throttle body will be on the right hand side and it will neaten up the boost pipes etc were they will be running :)

Thats the main reason I've got for the BAM inlet mate

Looking good anyway mate, just doing my interior loom at the minute and been fucking about with my slam and lights :)

inlet etc all fitted and it makes it look a lot better now.......you almost done? All these posts I see on facebook about Pearl you must be nearly done

Good progress man, cant wait to see/hear it!

Nah keep getting fucked over with bits and had 5 days off for my mates birthday, also ran out of money so had to wait for payday. I've got lots done but still waiting on main parts like subframe bolts, arb links etc etc... Mines basically turned into a full nut/bolt resto!

What injectors you gone for?

I've decided to swap my inlet setup for the BAM inlet, injectors and fuel rail....also means my throttle body will be on the right hand side and it will neaten up the boost pipes etc were they will be running :)

Thats the main reason I've got for the BAM inlet mate

Looking good anyway mate, just doing my interior loom at the minute and been fucking about with my slam and lights :)

inlet etc all fitted and it makes it look a lot better now.......you almost done? All these posts I see on facebook about Pearl you must be nearly done

Good progress man, cant wait to see/hear it!

Nah keep getting fucked over with bits and had 5 days off for my mates birthday, also ran out of money so had to wait for payday. I've got lots done but still waiting on main parts like subframe bolts, arb links etc etc... Mines basically turned into a full nut/bolt resto!

Neither can I man, so close now!

Haha yours will be a while then....I'll see you at a show next year then? Lol when you reckon it will be on the road?

- Driveshafts ordered, be here next Tues/Wed

- 70% of wiring is now in place, just need a 6n2 GTI engine loom to plug into the interior fusebox and then splice the 20v 13wires from the engine to the interior

- Final adjustments to the Dogbone mount done

Few pics, nothing too special:

Heater box is in and the Interior loom is pretty much lined up - Just need to put the dash in place to sort out where they go (Looks a right mess!!)

Loom extended down inside of Drivers Side Wing

Loom extended down inside of Passenger Side Wing

New Inlet fitted so the TB is on the right hand side :)

First two wheels hopefully be rebuilt tonight

Edited 5 April, 201214 yr by haz911

Looking good mate, keep it up!

Looking good mate, keep it up!

Cheers! When's yours likely to be ready? Be good to go out for a spin

Looking good mate, keep it up!

Cheers! When's yours likely to be ready? Be good to go out for a spin

Erm...6 weeks at this progress, pretty much cant do paint,exhaust, remap untill the 28th anyway which is next payday but wheels, engine, wiring, driveshafts everything else is readyish...

When you do the 13 wires from the Audi loom to the 6n2 fusebox...can you list them or pm me mate, wanna double check against mine when i do it (thats if you dont mind).

I take it the 70% of the wiring you say is complete is the 6N2 wiring inside the car and extending the various parts of the loom that control the headlamps/horn/wipers/indicators/rad and fan?

Looking good btw...

When you do the 13 wires from the Audi loom to the 6n2 fusebox...can you list them or pm me mate, wanna double check against mine when i do it (thats if you dont mind).

I take it the 70% of the wiring you say is complete is the 6N2 wiring inside the car and extending the various parts of the loom that control the headlamps/horn/wipers/indicators/rad and fan?

Looking good btw...

Yeah no problem :) I will take some pics and send them to you :)

Yeah that's right, all extended and in position just needs those 17wires now lol.

Cheers