what wheels? amazing car mate :)

They are BBS RW001s.

what wheels? amazing car mate :)

They are BBS RW001s.

correct :)

Right so went out today to speak to a few people, got a couple cool thing in the pipe line, hoping to get them for edition, but we will see

pmd you about your cades mate

Car is looking sweet!!!! nice colour choice too

Holla club polo not forgot about this? Right still trying to get more bits done but am flat out at work :( hoping I canvdo a notch next week and get it sitting/ driving better. Got some lupo drive shafts and hubs to be re furbed and fitted. Still trying to get a few bits done before edition, its going back to dookas next week for a full detail again.

I am also after another front and rear bumpers :) so if you got some going cheap let me know

right so small update the prep for edition has started :)

steam clean interior including steering wheels

wet vaced seats and carpet

full paint correction and sealed

engine bay steam cleaned

inner arches cleaned and wheels clean and sealed again

glass sealed

and plastic trim sealed in

testing a few very new products to see how long they last etc

anyways pictures

got some time off next week to finish the edition prep, so got this lot to fit

new air filter, pollen filter, oil filter, fuel filter, oil, front disc, pads, spark plugs, and wipers, also forgot to say it had its cambelt done the other month too

No fed back?

Looks amazing mate everything just works so well keep up the good work :-)

I love this mate, some proper effort put in and the brilliant results show. Very well done!

Love this!! Never thought they alloys would look good on a 6n2 but they look sick as fuck on this.

Edited 23 August, 201214 yr by davidelliott294

that colour works so well with the car, you'd almost think it was a colour option

did the steam clean do a lot for the steering wheel? as mines looking abit tired at the moment

Love this!! Never thought they alloys would look good on a 6n2 but they look sick as fuck on this.

cheers mate i knew they would work there a nice wheels and suit the lupo lines so well, just had to find a set lol

that colour works so well with the car, you'd almost think it was a colour option

did the steam clean do a lot for the steering wheel? as mines looking abit tired at the moment

Thanks buddy, yer thats the look i was going for, didnt want it to look custom, nice oem+ look, same with the wheels etc, the steam cleaning has work wonders amazing only thing is its brought out just how bad the steering wheels condition is so now on the hunt for a new one :( before we steamed it the red stitching was only just noticeable.

Thanks for the comments people, got more lined up just a matter of time and money :(

just to keep this alive :)

keep the fed back coming good or bad :)

right so small update the prep for edition has started :)

I like your hoover!

Ano, I like the purple shade.

right little update over here

Up-date no photo atm but went to waxstock last weekend and got told to put it in the arrive and shine so i did, and had a chilled day

4 oclock came and the little prizes where given out. i wasnt expecting a thing with it being a full on detailing show, but next thing i know my cars reg is being read out for 3rd place

first thing I've ever won over the moon

to day I've done more to the car in prep for edition

full service including oil, oil filter, air filter, pollen filter, spark plug and also did the following

front disc and pads, painted front calipers, painted alternator, painted rear brums, painted exhaust tip, painted gear box

few pictures

thoughts and feed back welcome good or bad, few little bits to do and then shes ready for edition

Love the colour of this mate, Also what wheels are they ? Due to prefer them over my BBS RX2 that come on my GTi

Love the colour of this mate, Also what wheels are they ? Due to prefer them over my BBS RX2 that come on my GTi

BBS RW001's.

right so nothing much happening to this atm with being away with work alot, back for the next two weeks before japan :) so started these

sand blasted

primer, paint and lacquer they look alot better in rear life :)

ordered vw wheel bearing, new hubs, and new ball joints will get these built and then start on the drive shafts, then its notch and it should drive better :)

ooooow and i had this made for edition hoping to get the other 3 in time but still working on the programming, never seen it done. so think I'm the first :)

first tempted

second with more refining

yep there centre caps :) changing them alittle more still.

almost for got this got delivered months ago :/

plans are

Chassis notch

new (second hand) uprights refurbed

New wheel bearings

New hubs

Rebuild another set of driveshafts

Sort stance 10mm front 15mm rear with 12mm spacers front 20mm rear

Sort rear brakes (hand brake high)

Few interior bits to paint

Custom grill

Different rear bumper

Refurb wheels

Audio build

And a few super special one off bits but not saying any more on them

right so drive shafts, stripped, cleaned check for wear, crack checked, sand blasted and then painted, two new inner joints due to wear, and the outers rebuild. got the ok from management today so doing a notch on the 26th after I'm back from japan then more lows, shafts in, get new hubs and build uprights and get them on, then get it tracked, need to try and sort my rear toe? as its like 3.5mm either side

Beautiful colour!

So..much...work.....so jealous. I wish i wasnt so lazy. This thing looks mint! Keep it up.

cheers for the feed back people.

gonna try and pick some small parts up tomo for it. nothing much tho. just time and moneys :( really wanna pd130 it. :(

keep the comments coming good or bad :)

So the little polo picked up top 20 at Gti festival at Santa pod last Sunday :) the lack of up date is due to being in Japan with work. Will sort some pictures out next week when back in the uk.

Sick car, love it. Those front mudflaps look like they've taken a scraping round corners lol .

Thanks mate, means a lot yep the old mudflaps defo catch :) but like the look of them :)