I love this man, good work. I've saved some of these photos to use as backgrounds for my phone!!

hope u dnt mind..

Love the attention to detail too :)

Cheers mate.

No problem, I have some of them on my phone too...

Mate have you got your arches rolled? And if so how much and what's the stretch on your tyres?

Jonny

Yeah I've had to roll/pull the front arches and bumper quite a lot to get it low enough and not catch. Also had to cut the arch liners out.

I haven't been able to do much to the rear arches though it catches them a lot lol, they pulled out a little bit and I've bent the lips back a tad, I need a proper arch roller.

I'm running 185/45 nankangs all around.

Edited 1 June, 201115 yr by Richibobs

love this mate! keep it up

love this mate! keep it up

Cheers matey! :-D

I took two random photos earlier, may as well post them on here.

smexy

is that a patch of gash paint on your bonnet or a sticker btw?

my grille surround has loads of blotches over, can't get them out, does my head in lol

loving the rota's

keep it up bud ;d

Yeah it's the paint :(

I think it's from when I was leaning to drive, I had some magnetic L plates and I'm guessing it's something to do with leaving them on all day in the sun, or rain getting trapped under it?

Anyway I can't fix it, so I'll probably buy a new bonnet in the future or get it resprayed, whatever is cheapest :p

Heh fair enough buddy!

Yeah I had magnetic ones but only had them on when I went out in it

And yeah, I went down to a local vw bodyshop today, they told me they usually charge £100 a panel :/ isn't too bad i spose, though would be shite if you had a small area to do lol

I got a quote from a local body shop at £70 per panel, I'm still not paying that though haha.

Haha I know, would rather have a go myself lol

I got a quote from a local body shop at £70 per panel, I'm still not paying that though haha.

Thats extremely cheap compared to one of the bodyshops i went to £2500 for an exterior re spray pahaha went down the road and for the same work got quoted £800 for a exterior re spray :p

£2500!

Nothing new yet just a couple pictures.

Should have some new bits in the next few days if all goes to plan :-D

Tuck down to the rim on the front :)

That's the plan mate

You got a lot of thread left? Or are you thinking about custom coilovers/turrets raised?

Think there is about 25mm left on the fronts.

If I can get any lower after that I'll take the helpers out I suppose.

I'm on 15's not 14's remember :(

Think there is about 25mm left on the fronts.

If I can get any lower after that I'll take the helpers out I suppose.

I'm on 15's not 14's remember :(

Your sitting pretty low for helpers still in.

Mines got helpers out, bottom adjusters out and cut bumpstops :(. damn stupid bidget coilovers. I need some new ones

heh looking good as usual mate

loving the tyre stack too heh

What's these goodies then? :p My jom coilies are shit, back left just doesn't want to lower and front left top mount now sticks up out of the hole slightly so need to take the top apart >.<

Your sitting pretty low for helpers still in.

Mines got helpers out, bottom adjusters out and cut bumpstops :(. damn stupid bidget coilovers. I need some new ones

Oh man, mine are only budget too, the raceland ones

heh looking good as usual mate

loving the tyre stack too heh

What's these goodies then? :p My jom coilies are shit, back left just doesn't want to lower and front left top mount now sticks up out of the hole slightly so need to take the top apart >.<

Cheers mate :)

Plan is to knock the lips back on the rear arches so I can pull them out so I can drop it more.

Then drop the fronts all the way down hopefully

Should be picking up a 6n2 gti splitter and new axle bolts to replace my old ones while I fit my camber :)

Should be picking up a 6n2 gti splitter and new axle bolts to replace my old ones while I fit my camber :)

You doing the good old washer camber?

Nah I've got some shims.

Been waiting to get new bolts to replace the old ones before I fit them though.

Heh sick man, sounds good

was thinking of a 6n2 gti splitter, however dunno if can fit an 8v bumper without too much modding :/

Also you thinking of ever doing an engine conversion or keeping it 1.0l?