Skip to content

Red Paint Fade

Featured Replies

My Gf has just got herself a polo 6n in red so like many others the bonnet is slightly lighter than the rest of the car.

I dont know a lot about detailing (I have matt paint :) ) So was wondering if there is anyway to restore this back to the same colour as the bodywork? I dont have a DA or Mashine Polisher so would be by hand unless you could recommend a cheap-ish one? And what products to use?

Thanks

  • Replies 13
  • Views 1.8k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

Red pigment is always affected by sunlight, this is the case on paintwork and on plastic which has red pigment in it.

It all depends upon how bad it is, but it might be worth getting a bottle of T-cut and experimenting with that. You would then need to give it a good waxing.

Regards.

The cheapest studd i can think of is auto glymm paint renovator, give it a good going over with that and then use some colour magic (cant think who its made by but most motorfactors have it) its like a polish/wax and its the same colour as the car I've used that before with good results.

I used a combination of T-cut, G3 compound and Halfords own brand coloured polish with an electric mop and it has taken the paint from a Very dull purplish shade to a very nice deep blue!

Theres some terrrible advice on here. jesus.

Register on here,

www.detailingworld.co.uk

Never use TCut, ColourMagic, or G3 haha.

Get yourself some Elbow Grease and some AutoGlym Super Resin Polish.

SRP is a good polish, but is mainly polymer fillers which offers very little CUT to correct the paint, good as a cheap fix though

+1 on the Super Resin Polish should do it fine

Theres some terrrible advice on here. jesus.

Register on here,

www.detailingworld.co.uk

Never use TCut, ColourMagic, or G3 haha

Tcut wont do any harm can be polished after anyway and G3 will prob be too abrasive but works great for cutting back after wetsanding paint

Edited by jamiet2

The technology behind tcut is very old, as the polish is worked in it doesnt break down and become less abrasive as modern, better polishes do.

I'm not a big fan of any of the Farecla products, at work and also at home i use the 3m range.

Fast Cut Plus on Green polishing head

ExtraFine Polish on Yellow head

AntiHologram on Blue Head

Theres some terrrible advice on here. jesus.

Register on here,

www.detailingworld.co.uk

Never use TCut, ColourMagic, or G3 haha.

Well it worked just fine on my car!! I was'nt looking for a show winning finnish just a nice shiney car!

But on an advice forum, its surely better to give the best advice, and i try to do that with the areas I'm knowledgeable in.

my name is BODYMAN haha

But on an advice forum, its surely better to give the best advice, and i try to do that with the areas I'm knowledgeable in.

my name is BODYMAN haha

:-D This was pink when i got it, it had been left under a car port for over 12 months. I used menzera products on this

post-56057-1306764356_thumb.jpg

But on an advice forum, its surely better to give the best advice, and i try to do that with the areas I'm knowledgeable in.

my name is BODYMAN haha

Thats just your opinion!! your name means NOTHING!! I could use the name "18" Dick" does'nt mean I'm that well endowed!!!! I'm giving my personal experiance and the products I used worked great for me :lol:

But as you said, it wasnt a show finish.

If you used a scotch pad it would make it red because it would get rid of the oxidization but it wouldnt make it red and shiney!

my opinion, which is also Professional Opinion haha.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.