Skip to content

Polo estate - 51 plate

Featured Replies

Came across a 51 plate polo estate - awful body work - 1.4 engine 83k on the clock.

Guy wants £400 - it has a blocked sump. Is this an ok price and what's the demand for them like? Runs for a while ok, then the oil light comes on. Any thoughts guys?

  • Replies 15
  • Views 1.6k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

Depends what you want it for.

If you want it as a daily beater and you are just going to sort the running issue and hack around in it then you don't really have much to lose. If its a project/fix up and sell, it's got awful bodywork and running issues i would try and start with one that costs a bit more but has a bit more going for it.

The diesel models are much more sort after for obvious reasons.

first question i would ask is how do you block a sump, and then what is it blocked with, and how it got there, and what other damage it has caused.

Worse case the engine is fooked can you get back your £400? if so id say it is worth a punt.

  • Author

Got the car - knocked it down to £300, have done a little minor service on it... so far it's responded well to treatment.

It's had a tough old life though, poor old girl :(

Bodyfiller is at the ready :p

Take a look:

post-38808-1317751245.jpg

post-38808-1317751253.jpg

Ha ha, Same colour as mine. Would say that looks like a new wing job though.

It's a lovely colour, I would love to modify one of these cars.

Dont see many of those about,saw an open-air version once,a few years ago tho.

Dont see many of those about,saw an open-air version once,a few years ago tho.

Must be a non-factory one surely?

Looked exactly like a factory model,cant remember tho whether or not it had the open-air logos on the car or not,was a few years ago,but can remember thinking,polo estate! oh its an open-air !!! was a dark navy blue in colour

Good cars the estate, i had a y plate with 110 bhp tdi in it. For £300 it has to be worth thatin tax, scrap metal and other bits that you sell.

  • Author

I've took the wing off, beat the panel out, sanded the wing and body filled it - I'm extremely perfectionist about bodywork so I'll send some pics up when I'm satisfied with the wing.

Then the driver's side rear quarter needs a heck of a lot of work - apparently a horse literally kicked the panel. :o

The cold air feed is completely sheared so I've made a temporary repair with toilet roll tubes and insulation tape :p - Seriously.

The drivers side lock has been glued I think - plus the car's electric windows open when you lock it from the passengers side.

Aside from the obvious, the car runs fine now - nearly.

About 10 months MOT on the car which is great.

I've already got some BBS wheels to chuck on it.

P.S. Anyone know the colour code for it?

Edited by muppetmaster

P.S. Anyone know the colour code for it?

Check for a sticker in the boot.

  • Author

Not there :(

If its the same colour as mine (which looking at the photos it appears to be) mine is coded LA5M.

This is my one

320635_2312634810440_1086496448_32778837

Edited by Ross74h

It's called Mercato Blue (or for keen german fans Mercatoblau) and my 6n2 is the very same colour.

  • Author
If its the same colour as mine (which looking at the photos it appears to be) mine is coded LA5M.

This is my one

320635_2312634810440_1086496448_32778837

How much of a coincidence is it that I have the exact same wheels on this Polo as you do? :o

Once I'm done with the wing I'll keep you all posted.

Thanks you two - it's really helped :)

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.