True especially when your really tried and you have to concentrate even more.. getting blinded by oncoming traffic, dodging potholes, when you just wanna get home

I care and don't at the same time.. i don't really wanna be changing subframe every couple month's

you wanna help me with a bike carb conversion

A bike carb conversion is piss mate haha :)

Maybe i will commission you to do a manifold in the future.. :)

haha I dunno why people keep asking me to do things for them & help them, look at the epic fail my engines been :(

What the fuck! so low! aha. Looks mental!!

What's this talks of subframe flip or something?!

Edited 30 March, 201214 yr by daveb142

Lol it's where you flip around the mount on the front coilovers check the first page

Edited 30 March, 201214 yr by randall121

haha I dunno why people keep asking me to do things for them & help them, look at the epic fail my engines been :(

Great effort though... I have throttle body failure on mine had to retard the timing..

It must be worth it just for the sound.

You must know how to take rear helpers out, just take em out!

I did trim all my bumpstops a little, but I have all my helpers in with smaller springs so its just as low as it was with the helpers out but is a million times more comfy and doesn't bottom out half as much :)

Edited 31 March, 201214 yr by Richibobs

Randall add me on FB dude, I'll show you what i've done to my rear bumper, mounting points etc to get the back right down-

I have to say thats pretty mental going that low Looks awesome

Edited 31 March, 201214 yr by Craig L

Thanks Guys :) ...

Quite an eventful day today, took rear helper springs out. Adjusted toe with one 1mm washer...

Raised the front a touch and dropped the rear.. Lot's of Arch bashing, I think it's sitting sweet...

It still rub's abit at the rear.. either i roll the arches or more camber 2to1 washer method..

It's okay though cause it sitting on the bumpstop the tyres are the suspension travel now

Still quite comfortable, just firm..

Fair play to you mate, when I first came on this I thought ok it's low but pretty shit haha, but now it's looking a lot better, fair play that low, on 15's!

Now thats sitting nice, good effort, not thought about a litle bit of cheeky stretch? cheaper than arches

Fair play to you mate, when I first came on this I thought ok it's low but pretty shit haha, but now it's looking a lot better, fair play that low, on 15's!

Bro, it's still shit...

Ask yourself why the passenger side gets all the attention...

Should i go for All out, Full respray.. or keep it the same. it's gonna need a new rear quarter

Waste of money?

Now thats sitting nice, good effort, not thought about a litle bit of cheeky stretch? cheaper than arches

Thanks man..

Yes i did, remember these wheels are only 7j... i got the cheapest tyres available.. either Nankangs or federal's

i chose federal because it was cheaper and i dont like how nanks collapse when stretched.

Mmm I keep thinking "shall I go for it" respray etc. but it's only a polo at the end of the day, do yours Matt blue?

Mmm I keep thinking "shall I go for it" respray etc. but it's only a polo at the end of the day, do yours Matt blue?

If you still wanna keep it and got the fund's, then yes..

I was thinking a cheap matte respray but its still gonna need all the bodywork doing rust etc... i guess it's cheaper in the long run

mm my cars starting to go in places. If I had anther car if go for it more with mods etc, it just can't be off the road :/

Buy a motor with T&T for under 500.. get temp insurance through your policy..

Get modding... Jobs a Goodun :)

If I had two, id wanna run two, that's the prob.

Valver front bumper was stone chipped to fuck within months

bosssssssssssssssss

You annoyed me when you came on here going on about being a lowest and all that...

But fair play, this is fucking low! haha

Looks good man, but get a gti splitter so its touching the floor

get a gti splitter so its touching the floor

I think a gti splitter would jus drag everywhereeeee he goes!

If I had two, id wanna run two, that's the prob.

Valver front bumper was stone chipped to fuck within months

Shows that its being used ... Racecar Spec

bosssssssssssssssss

Cheers Man... :-)

You annoyed me when you came on here going on about being a lowest and all that...

But fair play, this is fucking low! haha

Looks good man, but get a gti splitter so its touching the floor

:lol:

I Only did that so people would wanna click on my thread.. it could of easily been pushed back

Cheers though... GTi Splitter would be cool only if i could get a cheap used 1

Even the original splitter has scrapes on the front of it from me going up all small ramp

Half of it came off when was reversing into my drive

get a gti splitter so its touching the floor

I think a gti splitter would jus drag everywhereeeee he goes!

would look sick though...

looks so nice on them wheels

get the paint sorted and its a winner

Yeah mine scrapes like on every hill but it's riveted and bolted on so I dont think it will ever come off

Do you used a micra jack? Where did you get it from cause mine doesn't really go under my car anymore :(