Skip to content

Who has the fastest small block 6n

Featured Replies

  • Author

The idea of it being 6n only is the weight difference and such, I'm interested in how people's setups react and work in the 6n, an AFH in a 6n & a mk2 or 3 are gonna be totally different

  • Replies 50
  • Views 6.5k
  • Created
  • Last Reply

Top Posters In This Topic

Jez's 6N was pretty good value. It was one of the earlier 1.6 AFH hybrids in the UK (2005/6ish - Dogwood's and Karlos-the-Jackal's pre-date this), which on stock injection was around 140bhp. The real winner was the nitrous kit, though without direct port it'd never take more than a 25 shot of the giggle gas without getting the hump. From memory his quickest 1/4 mile was a 14.9s pass.

  • Author

^^^^ see that's what I'm interested in

It drove really nicely too, stock ECU with Polo GTI injectors and a 4-branch. Nitrous was just for the drag strip.

It had a decent amount of torque for the road and ragged really well on the several laps of Donington I did in it. I can imagine that the similar setup in Guy's Mk2 is damn good too - decent power and economy without melting pistons.

  • Author

yeah :) it does make me laugh the people who say "mines this good" then they show melted pistons and such hmm

My 1.6 16v 6n2 gti has 146.6 bhp, it's got the following modifications such as a 4-2-1 Decat hidden 2.5 inch system in stainless steel, a k&n typhoon cold air intake induction kit and new updated sparks and new dis pack before the remap at AMD Essex with a chip replacement and tune on tesco ultimate 99 octane.

She defiantly goes some and I have only done the normal mods. And choose decent parts like the intake kit was money well spent as apossed to the scene bmc crappy intakes with no surface area intake that everyone loves to fit above a boiling hot engine lol.!

And my lambda sensors were shot so once I get new ones I will see well over 150bhp the guys at amd said....

c8f0f44a.jpg

2268c80d.jpg

  • Author

Cool man :) any more plans?

For me I doubt it as anymore tuning will stress other parts and more than likely be a waste of time, it's more than quick enough for me. If I want more power il just get a new car maybe.....

I'd love it's mainly for the noise but that's dreams hehe.

I can imagine that the similar setup in Guy's Mk2 is damn good too - decent power and economy without melting pistons.

It's a lot of fun, although melted pistons probably will be on the cards during the next stage of tuning :lol:

Finally I've been beaten!

Sorry for going off topic(ish) but whats the most power thats been achieved from a 6n including all engine conversions, turbos etc? I'm guessing its along the lines of pandas polo, but i don't know the bhp of that either. cheers jud

i hear theres some nutter who has a turbo'd vr6 6n ;)

Haha, I've heard the same rumour. id love to get it dyno'd, might be next stage after wheels are on, hopefully i won't be dissapointed/embarassed lol.

  • Author

haha just drive an enjoy, rolling roads cause suicide or severe cases of smugness hahahah

Proper:

ENGINE.jpg

220bhp- lots of rpm.

Harris.racing- I wouldn't worry too much about yours at the rollers, there's plenty of people who will spout shite all day on a forum, and not take their car to a rolling road to quantify any gains, or put it down the 1/4 mile and have some fun with it. Main thing is what you've learnt with it, and improvements you can do to make you happy.

  • Author

That AFH looks pukka! Awesome.

And thanks man, I'm notc happy yet, never was as there's still tweaking to be done - judging by others figures from

RR day though the rollers were fairly accurate.

I shall see, think I'd gone a bit far with a few things, I'm gonna have use of a rolling road soon,

Do a run, note settings, change one thing at a time and seeing its effects, then hopefully I can tweak and refine as best I can with the resources I have :)

i know you said 1.6 max..

but 1.9 diesel if that counts? and has no turbo so slowww

haha

0-60 and stuff i dont know, but max i've had is 100mph, never again tho, scared shit outta me and dont wanna loose my life haha!

not sure you read the first post

Sorry for going off topic(ish) but whats the most power thats been achieved from a 6n including all engine conversions, turbos etc? I'm guessing its along the lines of pandas polo, but i don't know the bhp of that either. cheers jud

theres the roofchopped awd 6n with 2 GSXR1000 engines in,

I'm sure ze germans have created many beastly 6ns we just dont hear about them because there more busy having fun then trying to break into scenes

  • Author

Yeah Germans have made mad things haha

Yoof that doesn't count :wink:

What's the spec on it tho? Looks like a proper fucking beast 8-)

Yep, more info wanted on that monster

Whats the exhaust mani? Looks similar to what mr pinch has for his, a genuine VW motorsport one or something. As it comes out quite far.

And the box?

What car is it in even?

Isnt it Dogwoods ? Looks like a Gemini box , very very nice!

gearbox.jpg

What on earth is that? :lol:

Nice isnt it ? :lol: Equal length driveshafts , cassette change ratios i think , yours for around 15k :-D

Not NORMALLY ASPIRATED but very fast for a small block...

First 260 BHP and then 380bhp out a aee engine :shock:

Motor:

Die Motorleistung liegt in moment bei ca. 380ps (steuergerät noch nicht abgestimmt) bei 1,8bar und ist dadurch der Stärkste VW Polo 2F 1,6L8V mit Straßenzulassung Deutschlands

· Umgerüstet auf einen Garrett GT2860RS Turbolader

· Lancer Evo 8 Ladeluftkühler mit umgeschweißter Strömungsgünstiger Anschlussleitung

· 440er Einspritzventile

· 60 mm Ladeluftleitung aus Aluminium

· Drosselklappe elektronisch Audi RS6

· Kurze Ansaugbrücke mit Strömungsbank gemessenen Trichter in inneren Sorg Motorsport ( Sonderanfertigung)

· asymmetrische Nockenwelle mit umschliff auf Tasselstößel

· angefertigte Tasselstößel Drehzahlfest bis 11800U/min

· verstellbares Nockenwellenrad

· Zylinderkopf Ein/Auslas aufgeweitet auf Dichtungsgröße und poliert

· Verstärkte Ventilfedern und Titanventilteller

· Ein/Auslassventile Bearbeitet und poliert (größere Auslassventile Natriumgefüllt 31,4mm) (größere Einlassventile 33mm)

· Ventilsitz Strömungsgünstig bearbeitet

· Angefertigte Schmiede-Turbokolben mit reduzierter Verdichtung, stärkeren Feuersteg, 20mm Kolbenbolzen, Kolbenboden und Kolbenschaft extra beschichtet

· Verstärkte Pleuellager oben

· Verstärkte Ölpumpe (ca. 30% mehr Druck)

· Ölspritzdüsen für Kolbenbodenkühlung

· Kurbelwelle um 30% erleichtert, ausgewinkelt, feingewuchtet und nitriert

Versteifungsplatte für Kurbelwellenlagerböcke gegen seitlichen verzug

sowie Ölhobel mit Schwabbelblech

· H-F1 Hochleistungspleuel in polierter Ausführung, gekürzt statt 144mm nur noch 135mm Länge(dadurch Drehfreutiger) mit einer Zugfestigkeit von 1400n/mm und einen Pleuelauge von 20mm Durchmesser (Sonderanfertigung)

· Tilton Schwungscheibe 180mm

· Tilton Sintermetallkupplung mit Alu-Anpressplatte 550N/mm Drehmomentfest.

· Marke Eigenbau Auspuff (Durchmesser 76mm)

· 76mm Hosenrohr Marke Eigenbau

· Edelstahl Stoßaufladungskrümmer aus 1.4828 Material Marke Eigenbau

· HJS WRC 100 Zeller Kat (Durchmesser 70mm*130mm*360mm)

· Bosch Rennsportsteuergerät (bekannt aus den Formel 3 Bereich (besser als Weber Alfa da es zu träge mit der Ladedruckregelung ist.) Motorelektronik mit Sonderausgänge, mit Aktivierung von 2.Kennfeld, mit MAP Sensor bis 3bar, OT-Sensor,Nockenwellensensor, Potentiometer und Programmierbarer statische Zündung

· G60-Getriebe passend umgeschweißt und umgefräst, auf verstärkte Lager umgebaut. 1, 2, 3, 4 Gang länger übersetzt, Differenzialsperre von Drechsler 100% selbstsperrend je nach Traktion

961eaede4b7de0e25ba926fa8ce8f5e4f3_4_lar

961eaede4b7de0e25ba926fa8ce8f5e4f3_2_lar

961eaede4b7de0e25ba926fa8ce8f5e4f3_1_lar

961eaede4b7de0e25ba926fa8ce8f5e4f3_8_lar

961eaede4b7de0e25ba926fa8ce8f5e4f3_7_lar

http://www.turbopolo.de.vu/

Edited by richard16vg40

Not NORMALLY ASPIRATED but very fast for a small block...

First 260 BHP and then 380bhp out a aee engine

EDIT; translated

Motor:

The engine power is torque (control unit is not matched) at about 380 hp at 1.8 bar, making it the strongest VW Polo 1.6 L8V 2F street legal in Germany

Conversely · Upgraded to a Garrett turbocharger GT2860RS

· Lancer Evo 8 Intercooler with vice-effective connection welded pipe flow

· 440 injectors

· 60 mm aluminum charge-air line

· Electronic throttle Audi RS6

· Short intake manifold with flow bench measured in inner funnel Sorg Motorsport (special order)

· Camshaft with asymmetric umschliff on Tasselstößel

· Fixed speed Tasselstößel prepared to 11800U/min

· Adjustable camshaft sprocket

· A cylinder head / gasket utilization expanded to size and polished

· Increased valve springs and titanium valve head

· A / Edited and polished exhaust valves (sodium filled exhaust valves larger 31.4 mm) (larger intake valves, 33mm)

· Machined valve seat Aerodynamically

· Ready-made wrought-turbo pistons with reduced compression, stronger top land, 20mm piston pins, piston and piston shaft coated extra

· Reinforced top rod bearings

· Increased oil pump (about 30% more pressure)

· Oil jets for piston cooling

· Crankshaft by 30% easier ausgewinkelt, finely balanced and nitrided

Stiffening plate for the crankshaft bearing brackets against lateral distortion

and windage tray with Schwabbelblech

· H-F1 High performance connection in a polished finish, instead of cut 144mm length only 135mm (thereby turning Freu Tiger) with a tensile strength of a connecting rod and 1400n/mm of 20mm diameter (special order)

· Tilton flywheel 180mm

· Tilton Sintermetall clutch with aluminum pressure plate torque 550N/mm hard.

· It-Yourself Exhaust (76mm diameter)

· 76mm Y-Pipe-Yourself

· Stainless steel material 1.4828 from Stoßaufladungskrümmer-Yourself

· WRC 100 cell HJS catalytic converter (diameter 70mm * 130mm * 360mm)

· Bosch racing controller (known in the Formula 3 field (better than Weber Alfa because it is too slow with the boost control is.) Engine electronics with special outputs, with activation of 2.Kennfeld, with MAP sensor to 3bar, TDC sensor, camshaft sensor, potentiometer and Programmable static ignition

· G60 gearbox suitable vice and vice welded mills, rebuilt in reinforced bearings. 1, 2, 3, 4 Speed ​​translates longer, differential lock from turner 100% self-locking, depending on traction

:)

Edited by mark_crox

380PS equals not 380bhp ;)

Impressive mind, you got any 1/4 mile figures?

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.