Just looks like you trying too hard to me i'll reserve judgement until its done

Trying too hard in what sense man?

Asin they look like your trying to fit something that just shouldnt be made to fit a polo. I'm not over convinced, if your happy though what does it matter

Thats cause thats exactly what it is, something thats not meant to be made to fit a polo, 15x10 et-15 shouldn't go anywhere near a polo lol!

Have you thought about following the front arch down over the front bumper berg cup/RWB style? I think thats what it's missing :) looks insane.

I like this idea

Yeah man, i shall be doing that, its just a little harder with my bumper as its made of fiberglass not plastic, so i can't just plastic weld it up :( instead, i'll use a cunning trick i know and make it haha.

Just looks like you trying too hard to me i'll reserve judgement until its done

Trying too hard in what sense man?

Asin they look like your trying to fit something that just shouldnt be made to fit a polo. I'm not over convinced, if your happy though what does it matter

Thats cause thats exactly what it is, something thats not meant to be made to fit a polo, 15x10 et-15 shouldn't go anywhere near a polo lol!

exactly! and i'd love to say its awesome because you wouldnt expect it but its the opposite. you'd expect it to look well like the above and it does If this was to have some proper bubble arches or just rivet on items (not the usual ones, something abit differant) then maybe it could work.

Dude, don't take it so serious, thats a layer of fiberglass over the arches, nothing else, just primed up so they didn't attract as much water. There was no filler work in those arches whatsoever when that picture was taken. They're not as sharp shape wise now.

Ahhhh now I'm normally with Ben on things like this but i really like those arches and wheels, but ill tell you what it is that just doesnt work, its the fronts....if they were 15x8 and the set was staggered then this would just be full of win =D

also i think your going to find youll struggle with that bumper and 15s, when shaun ran his, even on air it just didnt work and caught left right and centre!! they were moulded from Ash's car and he runs 16s.

top work though and really nice to see you enjoying what your doing =D

Yeah height is an issue with the bumper, although it was driven once with it on 13's, for the length of my road, which is properly no more than 800yards each direction, it cracked twice and scraped the whole way, it was hilarious. It now sits about half an inch off the floor.

I know what you mean about the wheels being staggered, but that's a rear wheel on the front, so the arch could be built a little wider to make them sit slightly lowered and further in than the rears do (10j rear' 9jfronts) fronts are ready to be built up, so they'll be done one evening this week/weekend and then the tyres will be on ASAP. Then if it needs more arch work, we'll go from there.

they're much to wide imo.

Yeah they are. I thought we already established that?

OWD filler? It's not going to be to everyones tastes either dude, if you don't like it once its complete then fair enough :)

Maybe. When is Polo show?

Edited 16 April, 201214 yr by wiggy123

I think it looks rude in that last picture, especially if the smaller wheels were on the front.

I'm excited to see it with them on the fronts :)

Sorry old filler asin the.... The filler haha sorry.

Umm july mate, have a look in the meets section of the forum and there's a 2012 poloshow section. I'd link you but I'm on my phone.

Ah i see! I work in a bodyshop, so i'd hope i have potential with it! Haha. I'll see about Poloshow, can't see why not though.

I think it looks rude in that last picture, especially if the smaller wheels were on the front.

I'm excited to see it with them on the fronts :)

Thanks dude, fronts will be on soon, just trying to find the right bolts as I'm missing a few! Then swap the 50profiles out for some 45's, on the rear too and maybe paint the centres a different colour while the tyres are off, that won't happen straight away, need it on all four wheels first, to see how it sits.

Hurry up with putting the fronts on

Hurry up with putting the fronts on

Bring me some bolts!! :(

No real updates, more work on the arches, finally got round to starting the passenger side too and i bought some MK5 Golf GTI sideskirts which i've shortened to fit :)

Ha, can you really stand behind that and think it looks good?

looks fat as fuck mate...literally.

how much works involved with getting the 6n2 sills on? was looking into it myself, but didnt have time to fuck about.

Ha, can you really stand behind that and think it looks good?

can you really sit there behind your keyboard and say it dont?

can you really sit there behind your keyboard and say it dont?

X2

THIS IS AMAZING!

LOL no i can't stand behind it and say it looks good... Because there is a trailer in my way.

Thanks to all who like it.

Rob, i haven't got 6n2 sills dude?

My bad, I read it wrong, thought you said Mk5 skirts as in Polo...skim reading fail haha.

LOL no i can't stand behind it and say it looks good... Because there is a trailer in my way.

That explains it.

LOL no i can't stand behind it and say it looks good... Because there is a trailer in my way.

That explains it.

What a total Penis.

Looks sick will, cant wait till its all done!

This is so gay.

i was gona run mk5 gti skirts b4 i went with the ek civic ones top wrk will can't wait to see the arches finished :-)

wide motherf*cker