Skip to content

Polo 6N2 dash conversion to 6N

Featured Replies

Hi there,

At the moment i have a lot of spare time and i want to do some work on my 6n. I have found a kit which will convert my 6n dash into the newer 6n2. Some might say it's worth the time, others might say it's not but i'm gonna give it a go anyway. What is the list of items that i will need for this? The kit i have been offered contains the following things. Notice that this is translated from german into english through google translate (I'm danish):

Dashboard,

Inner life including Airb.,

-all air vents,

Light switch unit,

Speedometer panel,

Steering wheel complete.,

Airbag control unit

-div. Small parts, etc.

For me, it seems like this kit contains all the parts that i need to achieve this, but do i need something else too? The reason why I'm buying this from germany is that my car is LHD and probably 99% of all parts sold from the UK is RHD. I have been searching for some threads on this forum about it (and other forums aswell) and i'm still gathering as much as possible.

I hope that someone in here might have been doing this can could be of any help, provide pictures, or any tips or tricks. I will also make a full guide about how to do this so other people who might have this in interest will be able to do it aswell. This thread won't only help me but others aswell.

Right now i know that the dash itself will fit just fine but there needs to be changed a bit of wiring. The wiring is depending on which model you have (as far as i know). My ride is a 6N from 1998 (3-door) hatchback. I found a thread where a guy posted some of the dash wiring diagrams from both a 6n and 6n2: http://www.tigerstyle.co.uk/phpBB3/viewtop...t=47301#p367924

If you can provide a detailed explanation about how to do this, it will be greatly appreciated!

  • Replies 14
  • Views 6.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Most of it should be plug and play, but you won't be able to get the revs to work, since the 6n2 system uses a driveby wire system.. The only way, I guess to do it is to do what I've done and swap t

  • It probably would be, yes.. If you're getting the dash and the loom, you might as well fit a 6n2 engine..

  • Author

up: isn't there anyone who can give some information about this? Any kind of useable information will be appreciated.

i would also like till know buddy as i hve the 6n2 dash lying about

  • 4 weeks later...
  • Author
i would also like till know buddy as i hve the 6n2 dash lying about

Just a quick update... Picked up a dash in germany with most of the parts.. just need some few last parts, then i got the whole set. Noticed that this speedo only has up to 5K RPM's on it while my current 6n speedo has 6K RPMs, so I'm gonna get GTI clocks very soon. If anyone could support this with some haynes wiring guides, it would be appreciated.

Most of it should be plug and play, but you won't be able to get the revs to work, since the 6n2 system uses a driveby wire system..

The only way, I guess to do it is to do what I've done and swap the crank sensor from a 6n2 block, but that would mean piggybacking the 6n2 ECU onto the clocks, just to provide revs. Seems a bit of a waste..

  • Author
Most of it should be plug and play, but you won't be able to get the revs to work, since the 6n2 system uses a driveby wire system..

The only way, I guess to do it is to do what I've done and swap the crank sensor from a 6n2 block, but that would mean piggybacking the 6n2 ECU onto the clocks, just to provide revs. Seems a bit of a waste..

What do you mean by "revs"? RPM's or something else?

Yeah, RPM. On the 6n, it was picked up off a pulse from the coil.. But the 6n2 system uses a crank ring (like an ABS ring), which is a hall sensor, sent to the ECU and then it decides the RPM of the engine.

It's also got a gap, so it knows where TDC is..

  • Author

So, wouldn't it just be easier to fit in a 6n2 engine (like a 1,6 GTI?) instead of doing all this? I'm thinking switching from my 1,4 8v anyway.. ;)

It probably would be, yes.. If you're getting the dash and the loom, you might as well fit a 6n2 engine..

Not gonna lie.. at first i was like "yeah ok, i have a 6n and a 6n2 dash would be nice/cheaper then buying a 6n2"... but then changing to a 6n2 engine too.. wouldn't that defeat the object?

I hope you are doing this work purely for educational purposes or perhaps the 6n shell is in mint condition?? :S

  • Author
Not gonna lie.. at first i was like "yeah ok, i have a 6n and a 6n2 dash would be nice/cheaper then buying a 6n2"... but then changing to a 6n2 engine too.. wouldn't that defeat the object?

I hope you are doing this work purely for educational purposes or perhaps the 6n shell is in mint condition?? :S

My 6n has a lot of personal value to me, and also this is Denmark, we are talking about a 180% registration fee. ;) I would need to spend over 10,000£ on a new 6n2.

Not gonna lie.. at first i was like "yeah ok, i have a 6n and a 6n2 dash would be nice/cheaper then buying a 6n2"... but then changing to a 6n2 engine too.. wouldn't that defeat the object?

I hope you are doing this work purely for educational purposes or perhaps the 6n shell is in mint condition?? :S

My 6n has a lot of personal value to me, and also this is Denmark, we are talking about a 180% registration fee. ;) I would need to spend over 10,000£ on a new 6n2.

Slap that 6n2 dash in then!! :) haha

  • Author
Not gonna lie.. at first i was like "yeah ok, i have a 6n and a 6n2 dash would be nice/cheaper then buying a 6n2"... but then changing to a 6n2 engine too.. wouldn't that defeat the object?

I hope you are doing this work purely for educational purposes or perhaps the 6n shell is in mint condition?? :S

My 6n has a lot of personal value to me, and also this is Denmark, we are talking about a 180% registration fee. ;) I would need to spend over 10,000£ on a new 6n2.

Slap that 6n2 dash in then!! :) haha

I will do! Right now i'm just gonna gather all the pieces that i need. I bought one from Germany with the steering wheel for about 250€. Was offered the same thing in Denmark (with less parts and no steering wheel) for about 750€, so there really IS a big difference as soon as you enter this country. ;) I'm gonna keep this thread updated with the progress.

you will need the following from a 6n2..

dash

Centre console

Heater controls

Doorcards (not essential but fit better)

A pillar trims

Air directional tubing (behind dash)

blower housing

Dash mounts (original ones will need to be smashed/cut off)

Tweeters

Steering column cover

You will also need LUPO clocks that are BEFORE 1999 models.. due to the canbus systems in 6n2s meaning the rev counter wont function. These lupo clocks still light up blue with red needles but the face of them are white not black..

Your heater matrix from your original housing will need to be exchanged into the 6n2 housing also.

If you can get hold of a full 6n2 wiring loom & diagrams then it would help also (I did NOT do the wiring conversion on my 6n2 dash so not going to be a help with that).

It was a bit of a pig to do just swapping the housings and dash, i dint do the converting of looms, i dont think i woud have bothered if it wasnt already pre-done..

P.s if you have aircon in your 6n like i did.. it will leave a square hole in your firewall from where the AC pipes go into the cabin - the housing for the AC is a C**T to get out aswell.. no room at all to get to the bolts.. there are some brackets held on by a nut but the nut you need is hiding under the braket you just took off so you gotta struggle all over again..

Personally i think its worth it if you can get someone to do the wiring.. but even from my easy experience, i doubt ide bother with the effort again haha

Hope this helps a bit :)

Edited by Tech-Ho

  • Author
you will need the following from a 6n2..

dash

Centre console

Heater controls

Doorcards (not essential but fit better)

A pillar trims

Air directional tubing (behind dash)

blower housing

Dash mounts (original ones will need to be smashed/cut off)

Tweeters

Steering column cover

You will also need LUPO clocks that are BEFORE 1999 models.. due to the canbus systems in 6n2s meaning the rev counter wont function. These lupo clocks still light up blue with red needles but the face of them are white not black..

Your heater matrix from your original housing will need to be exchanged into the 6n2 housing also.

If you can get hold of a full 6n2 wiring loom & diagrams then it would help also (I did NOT do the wiring conversion on my 6n2 dash so not going to be a help with that).

It was a bit of a pig to do just swapping the housings and dash, i dint do the converting of looms, i dont think i woud have bothered if it wasnt already pre-done..

P.s if you have aircon in your 6n like i did.. it will leave a square hole in your firewall from where the AC pipes go into the cabin - the housing for the AC is a C**T to get out aswell.. no room at all to get to the bolts.. there are some brackets held on by a nut but the nut you need is hiding under the braket you just took off so you gotta struggle all over again..

Personally i think its worth it if you can get someone to do the wiring.. but even from my easy experience, i doubt ide bother with the effort again haha

Hope this helps a bit :)

Thanks a lot, the thing with the lupo clocks really helped me! I found this from '98: http://viewitem.eim.ebay.dk/VW-LUPO-Bj98--...0678319969/item but i guess that i would like the clocks aswell. :p they indeed make a better looking instrument board. A broker would probably have this?

- Chris

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.