Skip to content

Serious Weight saving

Featured Replies

Hey guys for any of you that know mymk2 bready its under going a massive conversion to 4wd and i have a full 15 point safety devices roll cage that i have added alot more extra strengthening to as it will be the main structural part of the car and everything important will be supported by it.

now the problem is due to all this extra stregthening I'm adding alot of excess weight which i now want to try and save in other places from as big as possible to even little things that will all add up

ideally i want to get it back as close to standard weight as possible

so far I'm thinking:

remove sunroof and weld up with thin sheet (need to do anyway as roll cage interferes with it)

replace all door cards with thin abs sheet

hole saw inner skin panels where possible

dash and interior all fully removed (I'm constructing a minimalist rally style dash)

removing all soundproofing

i have thought about fibreglass panels but not sure if they are worth the money yet i will be getting a front panel though as the front end is getting spaceframed

any other ideas guys

thanks

  • Replies 105
  • Views 6.9k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

Jus gut your doors completely so it's just outer skin lol. Plastic windows, get it acid dipped and paint thin

polycarb windows?

remove passenger seat - fibreglass/carbon fibre drivers seat.

mine are fibreglass from magnum motorsport.

Are you a fatty?

Go for a dump before driving

PhilJ is offering F/G panels n stuff, and poly windows

Hole saw is always a winner for weight saving too ;)

Not worth getting a fibre-glass boot lid as they're so light already,

I'd definitely invest in a fibre-glass bonnet and doors though, get in touch with PhilJ

The doors must way 20kg each, maybe more? And the bonnet isn't exactly light.

You could also invest in lightweight seats/wheels etc. Do a bit of research into sprung weight, un-sprung weight and rotational weight,

What are you trying to improve on, outright acceleration, handling or both? Is money a big part of the equation?

I see a lot of people adding much bigger brakes to improve braking performance (but adding un-needed rotational & un-sprung weight), but do they really need it? i don't think so...

I see a lot of people adding much bigger brakes to improve braking performance (but adding un-needed rotational & un-sprung weight), but do they really need it? i don't think so...

We do that to look cool.

lay off the pork scratchings and install some Kirkey race seats.

Cut the frame work off the underside of the bonnet, remove hinges and use bonnet pins to secure it

Cut the frame work off the underside of the bonnet, remove hinges and use bonnet pins to secure it

good shout! mk2 bonnets do have some overkill strengthening stuff IIRC.

I need a mk2 in my life.

Carbon fiber roof skin FTMFW

Fill tyres with helium

only put a fiver in at a time

Run without tyres

Remove engine and Flintstone it

Remove engine and Flintstone it

Just about to effing say that!!!

How structural is the wheel well? bet that weighs a bit.

Take it out and weld a thin sheet in its place?

Removing it will give more rear diff space too.

Ditch the starter motor and get a mate to push start it

You could easily save 5kg in buying the right set of wheels/tyres.

Custom driveshafts and prop could potentially save some weight. Better material can be made smaller for the same strength which in turn should reduce the weight.

From what I could gather the shell will not be contributing towards the structural rigidity of the car. So you could cut away pretty much all of the double skinning on the inside.

If you are going to be putting a tunnel in for the prop (and maybe exhaust) this could be made from aluminium and held onto the floor plan with rivets and adhesive.

post-35609-1337636732.jpg
  • Author

cant believe how many replies already thanks guys

wheel well is gone already cymro have an alloy race tank in the boot instead

and already going for poly carb windows forgot to say

f/b doors are like £500 each so dont know if they are worth it cant get a bready boot but il lighten that as much as poss

money is important really not going spending crazy and i will be getting lightweight fixed buckets too il have a look at the ones listed above

i will take that structural webbing off the bonnet its a good idea and was going to cut the middle of it out and maybe thin ally plate riveted in instead or thinnnish abs plastic sheet

thanks so far keep them coming

post-35609-1337636732.jpg

hahaha, Sorted then.

  • Author

oh and I'm only 9.5 stone btw and I'm running lightweight rota zero wheels already

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.