hmm I'm getting a exhaust like this after xmas , ill make sure its away from the bumper a little bit more :p you are car looks nice dude , bit too much stretch but its you are car so u can do what u like :)

if i cant fit my valver rear end i'll either have to cut this one down or sell it. its not that its too close, i had a tractor flap on it and it slid down the pipe causing the hot gases to direct onto the pumper. rookie error haha!

if i cant fit my valver rear end i'll either have to cut this one down or sell it. its not that its too close, i had a tractor flap on it and it slid down the pipe causing the hot gases to direct onto the pumper. rookie error haha!

ahaa nice one the only worry i have with the exhaust is when it rains , i guess ill have to invest in a tractor flap too but itll just be a pain fitting it and removing it all the time :/

ahaa nice one the only worry i have with the exhaust is when it rains , i guess ill have to invest in a tractor flap too but itll just be a pain fitting it and removing it all the time :/

its really not so bad, i just didnt put it on tight enough. you dont need to worry when it rains, just when you start it up just rev it a few times to get the water out

I had an exhaust like this on my golf and had a hole drilled at the bottom of the pipe just after the box

I had an exhaust like this on my golf and had a hole drilled at the bottom of the pipe just after the box

why did you do that buddy? coz of the same reason my bumper has melted? mines never had this problem before, its just that my tractor flap slide down, plus i was tearing to catch up with darron and mass on the m3 lol

I had an exhaust like this on my golf and had a hole drilled at the bottom of the pipe just after the box

why did you do that buddy? coz of the same reason my bumper has melted? mines never had this problem before, its just that my tractor flap slide down, plus i was tearing to catch up with darron and mass on the m3 lol

Was only like a 6mm hole to let the water to somewhere

I did have my exhaust clamp come loose on the mk2 and I refitted it at another angle which melted my bumper off the bumper hangars never realised why everyone was flashing me down the 329 lol

This is it btw might put a face to the name?

This is it btw might put a face to the name?

Oiiiiiii thats rude! But nope i've never seen it before. where you from again? FB me, i wanna post that pic on almost famous

been looking at this and its pretty cool . i say F**K the haters, and thommasss is from bracknell btw

I love that MK2

Went to Lakeside last night to hook up with my mates Jason Stave and Kats and on the way back my throttle jammed open on the m25. Bonnets safety catch was jammed too and couldnt be accessed so had to have 3 recovery trucks relay me back to reading, the first guy damaged 2 of the schmidts loading it on (only noticed after he dropped me off for the next guy) Seriously debating about selling up or breaking it if anybody is interested

Unlucky.

ill have the bonnet if you break it

ill have the bonnet if you break it

To be fair, after looking at the above picture, it needs to go silly wide on some berg cup arches or something....its getting trailered into the workshop tomorrow and getting worked on, gone too far to give up now

id just break it if i were you

Nah, can't break it. Only got £700 more to save for hydros, would be a shame to give up now. Sorry Josh, I know how much you hate it but oh well

id just break it if i were you

Buy some parts Josh? :p

my favourite shot to date, the c2 is owned by my good friend joe. for those that don't know i run almost famous and we done a photo/videoshoot on joeys c2, but i couldn't help but get some shots of the polo too.

...and yes i'm aware i need to put the splitter on, the grille in and spray the bonnet, i'm just lazy

and here's my favourite shot of joe's c2 (how sad, i have my initial on my jacket...fail!)

The only good thing is the wheels.

The only good thing is the wheels.

on what mine or my mates? and why?

Yours, never really liked the 16v bumper smoothed that much to be honest. The tyres are a bit too stretched aswell, if you can get a finger or maybe two between the tyre and rim you know its too much. Not seeing a pothole in the road and that's one completely fucked split rim, which aren't cheap at all!

Would like to see it on hydros though. Also, where's your grill?!

Yours, never really liked the 16v bumper smoothed that much to be honest. The tyres are a bit too stretched aswell, if you can get a finger or maybe two between the tyre and rim you know its too much. Not seeing a pothole in the road and that's one completely fucked split rim, which aren't cheap at all!

Would like to see it on hydros though. Also, where's your grill?!

i can fit my iphone between the rim and the tyre it sits in loselyto be fair. your right about the potholes, so far i haven't hit one. i'm rather careful when it comes to stuff like that. I can't wait for hydro's too but for now i'm getting it lower by removing the bumpstops and tweaking other bits, not sure what yet but my mate haps has just bought a 6n2 and it almost lays frame static so i'm gonna do what he's done.

i accidently threw the grille away when i was getting rid of some scrap metal from the old bumper in the garage

Just a few shots from today's body mopping session ready for UD

Was you at ace cafe?

Was you at ace cafe?

On Saturday? Yes mate i was

As much as I hate to say it (even though you love hate) Kinda like it in this picture, look forward to having a snoot round it on sunday.