That paint is ridiculously smooth! Have you done a base coat and then clear? Love the wheels, but liked them silver. The one with the red interior yours too? Interior was, ummm, bright!

The one with the red leathers was mine yeah but I scrapped it (don't ask y)haha but yeah base then claer it needs a good flat and polish this week some time. I'm putting all black leathers in till the Subaru seat go in next month and they will be bright haha Lamborghini green this time not red

Right well I've also got venom Motorsports old polo vr6

It was rotted to death so I started work on it but I can't be assed to be honest I'm thinking of taking out the mounts and loom ect and putting it in this polo but I'm unsure what I'd have to do with this been a diesel and the vr6 been a petrol I'm in 2 mines to put it in this are sell it all

Custom Mounts all on the frame

Loom

Custom rad

Custom driveshafts

Front panel

Everything needed to put a vr6in a polo not no botch job crap all proper

Hhhhmmmmm what to do???

fuck me, you need to do it!!!!!

Hmmm I can see more long nights ahed of me

just strip yours all out, loom and everything and then swap this all over =D

Hmmm I can see more long nights ahed of me

You will get bored and give up.....

Do you not like show cars as your slowLY working your way through the field scrapping them.

rear leathers fitted fit the fronts tomoro and post some pics for u all

Crap pics ill get some more in the day but here's the leathers

And put my 16v fogs in I forgot I had haha

I need a light switch with the fogs on if anyone has one please give me a shout thanks

Edited 26 September, 201213 yr by taylor d

Good quality pics there mate, should be proud

Good quality pics there mate, should be proud

It's was a shit iPhone 3 haha in the dark to

Well fingers crossed all going well tomoro afternoon on Sunday I might be going on a little road trip to pick up some parts

Hybrid front bumper

Fully smoothed boot

And a 16v rear with a 6n2 plate holder in it

If this dose happen ill post some pics Sunday nigh and if not ill be found crying in to my pillow in my bed room haha

If this dose happen ill post some pics Sunday nigh and if not ill be found crying in to my pillow in my bed room haha

Either way take some pics

If this dose happen ill post some pics Sunday nigh and if not ill be found crying in to my pillow in my bed room haha

Either way take some pics

:lol:

Dose anyone no anywhere good were I can have my roof on the polo done ???

Something like these. Not to everyone's taste i no but I like them I'm a but strange like that haha

Thanks Taylor xx

Well I picked my parts up yesterday I've just finished fitting my front bumper and with the splitter it sits on the floor so I'm going to have to rise it a little tomoro pics to come tomoro : )

Is the vr6 in yet? Lol

what are you actually doing then.....making 2 cars or just having one???

what are you actually doing then.....making 2 cars or just having one???

Think ill take everything off the vr6 and put it in this one over crimbo I was going to do both but bit off more than I can chew if I'm honest but o well ill learn one day haha

Quick pic of the new front bumper has no splitter on it as its to low

that looks mean! how did you get a 6n2 bumper to fit though?

that looks mean! how did you get a 6n2 bumper to fit though?

It's a 16v mk4 top and a gti mk5 bottom grafted together

that looks mean! how did you get a 6n2 bumper to fit though?

Its a hybrid bumper. There were 10 of them made originally, this isn't one of those 10 as it doesn't have a splitter on it. I've got one of the original 10 in my shed from my mk4. They're an absolute nice person to make aswell, trust me! HA.

Taylor, the only way to pull those bumpers off is air, because they're too deep, or if you/your mate is particually good with bodywork, as yours is a plastic one, you could shorten the centre out of it to make it the original 16V height.

Edited 11 October, 201213 yr by wiggy123

Cheeky hybrid bumper. like it dude.

that looks mean! how did you get a 6n2 bumper to fit though?

Its a hybrid bumper. There were 10 of them made originally, this isn't one of those 10 as it doesn't have a splitter on it. I've got one of the original 10 in my shed from my mk4. They're an absolute nice person to make aswell, trust me! HA.

Taylor, the only way to pull those bumpers off is air, because they're too deep, or if you/your mate is particually good with bodywork, as yours is a plastic one, you could shorten the centre out of it to make it the original 16V height.

Yeah the one I have is the original one that the mold was made off to make the other 10 : )

Iv put a standered splitter on it now still touches the floor haha but more lows to the rear tonight them some pics later

that looks mean! how did you get a 6n2 bumper to fit though?

Its a hybrid bumper. There were 10 of them made originally, this isn't one of those 10 as it doesn't have a splitter on it. I've got one of the original 10 in my shed from my mk4. They're an absolute nice person to make aswell, trust me! HA.

Taylor, the only way to pull those bumpers off is air, because they're too deep, or if you/your mate is particually good with bodywork, as yours is a plastic one, you could shorten the centre out of it to make it the original 16V height.

Yeah the one I have is the original one that the mold was made off to make the other 10 : )

Iv put a standered splitter on it now still touches the floor haha but more lows to the rear tonight them some pics later