Skip to content

Polo 6n2 gti bbs wheels

Featured Replies

Looking to refurb my polo 6n2 gti bbs split rims was wondering if any of yous could post up pictures of your 6n2 bbs split rims in different colours much appreciated

  • Replies 21
  • Views 7.5k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

PICT0446-1.jpg

CIMG0624.jpg

PICT0447-1.jpg

Can't go wrong with silver/polished lip imo.

I'm in process of doing mine.

Gonna go with grey metallic centres with silver lip.

!m!

these are the more sought after BBS wheels that are the same as the GTi wheels, but in 16in in size (195 tyres on the front, 205 rear)

these were split by myself, one bolt snapped and refurbed by Spit and Polish to original spec (polished lip with silver centre

011bgs.jpg

018fmf.jpg

022scz.jpg

012rw.jpg

007unu.jpg

009oci.jpg

018spg.jpg

i did mine black with a blue dish....

58340463-9AE5-43A3-873F-0E72DDAD2135-149

IMG00142-20110805-1914.jpg

Just had mine all in black, as the place i took em to didn't do polishing and couldn't find another decent place! Love em though. Look awesome in red

^ I'd be hugely unhappy with that finish if I'd paid to have them done. You'd expect the finish to be flat and uniform. That looks like a flowing river!

^ I'd be hugely unhappy with that finish if I'd paid to have them done. You'd expect the finish to be flat and uniform. That looks like a flowing river!

+1 tbh

All I noticed were that the bolts were sprayed over

How much they charge you?

How much they charge you?

After splitting them myself and putting them back to together myself; £60/70 per wheel

Jesus mate go mental I would, that's top top top price! I'd want a shit hot job!

Jesus mate go mental I would, that's top top top price! I'd want a shit hot job!

It was a proper job, and I mean proper; acid drip and everthing

They even said the weren't happy with 2 of them and completly redone them again for free

couple of sets I've done over the years

DSC_0697.jpg

popo2.png

couple of sets I've done over the years

popo2.png

That looks awesome!!

Different colours you say?

harley1.jpg

Also, a question that'll help me and others wanting to refurb, anyone know what size socket needed for the split rim bolts? and what they need to be torqued up to?

Thanks

m8 spline from memory

  • Author

thanks for the replies can someone tell me how and what to use to polish the rim up thanks

Also when yous all split your rims did you need to replace all the bolts as I have heard that the bolts can work there way back out?

Edited by jonnyd2k7

Different colours you say?

harley1.jpg

This ^

thanks for the replies can someone tell me how and what to use to polish the rim up thanks

Also when yous all split your rims did you need to replace all the bolts as I have heard that the bolts can work there way back out?

In regards to bolts, I reused mine (one snapped :/ so got the same one off eBay. The name/type of the bolt is on the head)

I cleaned up my bolts first, as someone, at some point over the life of the wheel done a "refurb" and just painted the entire wheel. So i left the bolts in a tub of Nitromores (or however you spell it) then gave them a good scrub with a heavy wire brush, and finally cleaned them up with a polishing drill bit in a power drill

When putting the wheels back together, make sure the channels where the bolts sit in the rim are clear (use an air gun just to blast the rubbish out)

Also, put a bit, and I mean small amount of grease around the bottom on the head of the bolt, as you don't want to rip the lovely fresh paint off the face of the rim

Try not to use wd40 in the channels were the bolts sit, as I done that and ripped the thread out of two of them.... A needless £20 gone to buy a thread repair kit

If there is anything else you need buddy

Ask away

I'm sure a group of people on here will give you the answer you need 8-)

post-74884-1355225174_thumb.jpg

thanks for the replies can someone tell me how and what to use to polish the rim up thanks

Also when yous all split your rims did you need to replace all the bolts as I have heard that the bolts can work there way back out?

Built many sets of split rims with 'reused' bolts and never had it happen. Just make sure you torque them up correctly. Remember not to go around the rim, always do it in opposites and work your way round. Just like you'd tighten wheel bolts.

  • Author

Thanks for the replies this has helped me a lot :thumbsup: :thumbsup:

406968_10151240586092707_952464431_n1.jp

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.