Skip to content

FK single wiper kit 6n2

Featured Replies

Hi guys,

I wonder if someone can help me out. I bought this single wiper kit

A9B50D64-372F-43E6-9CB8-4DB37A7B71E8-126

Unfortunately the kit never came with any instructions, I can't figure out how to install this and what part do I need to replace etc.

my question is has anyone here installed one to their polo and will be able to provide some sort of guidance how to do it.

Any comments are welcome ! Thx

  • 4 weeks later...
  • Replies 11
  • Views 4.6k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

Heya mate,

I'll write guideline for this exact conversion kit.. My advice to you is do not bother unless you have amazing amounts of patience, I've spent 5 hours trying to fit mine today and I'm stuck at the last hurdle, once it's done I'll update you with info. Also just incase you're not aware, this kit is designed for left hand drive cars where the wiper motor is situated on the right side of the engine bay not the left.. And the ecu is also in the way but I believe I have found a way to fit it without touching your ecu but does require you to hacksaw the new linkage a little bit. As I said I'll update with info and pics tomorrow :)

Heya mate,

I'll write guideline for this exact conversion kit.. My advice to you is do not bother unless you have amazing amounts of patience, I've spent 5 hours trying to fit mine today and I'm stuck at the last hurdle, once it's done I'll update you with info. Also just incase you're not aware, this kit is designed for left hand drive cars where the wiper motor is situated on the right side of the engine bay not the left.. And the ecu is also in the way but I believe I have found a way to fit it without touching your ecu but does require you to hacksaw the new linkage a little bit. As I said I'll update with info and pics tomorrow :)

Thx mate, really appriciate that!

I couldn't do it mate, in the end I got all angry and ended up breaking it :/ to make matters worse I hacksawed the original linkage so the motor has a mounting plate.. So now I have no wipers until Tuesday as I've got to wait for a new linkage to arrive which means I can't get into work.. If I were you I seriously wouldn't bother, with it being made for lhd it's impossible without moving the ecu but even then you still have the problem of the heater matrix filter being in the way. Bad times :( I'll let you in on a little secret ;) keep your original two wiper linkage on, take off the driver side wiper arm then change the passenger side arm for the one you get in the FK kit and change which spline it sits on in it's rest position :) it will sit a bit higher up the screen than that with the FK linkage but it does the job and personally i think it looks better.. I regret not doing that in the first place haha

You can make a single wiper easy if you have a welder, there's a how to on club Lupo some where.

heres a pic showing the single wiper done on the original linkage as i said earlier :)

http://s1290.beta.photobucket.com/user/tom...?sort=3&o=0

H mate, could you pls do a little write up on how you done it? Thx

heres a pic showing the single wiper done on the original linkage as i said earlier :)

http://s1290.beta.photobucket.com/user/tom...?sort=3&o=0

H mate, could you pls do a little write up on how you done it? Thx

Heya mate I've said how to do it in my last post if you have a read through that :)

heres a pic showing the single wiper done on the original linkage as i said earlier :)

http://s1290.beta.photobucket.com/user/tom...?sort=3&o=0

H mate, could you pls do a little write up on how you done it? Thx

Heya mate I've said how to do it in my last post if you have a read through that :)

Sorry mate haven't seen it :retard:

keep your original two wiper linkage on, take off the driver side wiper arm then change the passenger side arm for the one you get in the FK kit and change which spline it sits on in it's rest position :) it will sit a bit higher up the screen than that with the FK linkage but it does the job and personally i think it looks better..

Ok so my new standard linkage came today as i broke the old one trying to fit the single conversion.. as i said earlier you can do it using the original linkage, so today i set it up as i stated and here's a gif showing how it works, needs some adjustment but you get the idea :)

post-69892-1358899795.gif

Thx mate

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.