Skip to content

Mk2 Breadvan Air Filter Convesrion Kit?

Featured Replies

Hey guys,

I bought a new air filter for my car but i'm unsure if there is also a kind of conversion kit I have to fit in order to use it?

Its an Aprila air filter, trying to fit in my 1989 polo.

Any help would be great.

Thanks

post-146082-1373585860_thumb.jpg

  • Replies 7
  • Views 6.6k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

You need a golf spi elbow, the standard airbox is bolted directly to the carb so if you want a custom filter you need to get rid of it.

Even then the golf elbow might not fit on the carb

Your best bet is a k&n bolt on pancake filter which bolts to the carb

As above, dont know if the spi elbow will fit onto a peirburg/weber carb.

I do have a K&N filter to suit mk2 carb'd engines for sale..

It's worth remembered you've also got a warm air intake, pulling air off the exhaust manifold, which as it stands would be unfiltered.

Aftermarket ones that replace the filter housing and ducts are ok in the summer, but in the winter, mk2's need that warm air feed to prevent carb icing.

  • Author

Thanks for your input guys, it's been very useful. I'll have a look into some of the things you have suggested and let you all know later on how I get on!

  • Author
As above, dont know if the spi elbow will fit onto a peirburg/weber carb.

I do have a K&N filter to suit mk2 carb'd engines for sale..

Would you be interested in posting this at all mate or is it too large?

The elbow from the SPI golfs doesn't fit carb engines. The 'rare' GK elbow will fit the pierburg 1.3s, but you have a 1.05 which is completely different.

So go for the k&n that uses the standard filter housing. I did what you've done and put a cone filter on the side of the airbox, but if you use the warm air flap, this just lets unfiltered air into the engine (assuming you have removed the other filter!). To avoid this you need to disconnect the vaccum line for the warm air flap.

I found some parts in a scrapyard to replace the original cone shaped intake tube thing with a pipe and a scoop on the grille. I think that is the best way to go, so when you are driving along, air flowing through the grille is forced into the engine. Will get a pic later

  • Author
The elbow from the SPI golfs doesn't fit carb engines. The 'rare' GK elbow will fit the pierburg 1.3s, but you have a 1.05 which is completely different.

So go for the k&n that uses the standard filter housing. I did what you've done and put a cone filter on the side of the airbox, but if you use the warm air flap, this just lets unfiltered air into the engine (assuming you have removed the other filter!). To avoid this you need to disconnect the vaccum line for the warm air flap.

I found some parts in a scrapyard to replace the original cone shaped intake tube thing with a pipe and a scoop on the grille. I think that is the best way to go, so when you are driving along, air flowing through the grille is forced into the engine. Will get a pic later

That sounds pretty interesting mate! Yeah if you could post a picture on here that would be hugely appreciated :)

Thank you,

Stefan

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.