Skip to content

ABF breadvan

Featured Replies

As in title, really jealous of this but it looks so much work. I've seen it done where the guy had shaved the whole bay and was using a subframe, cost something like 1000. Anyone got the build thread of this?

post-39696-0-19327100-1381669458_thumb.j

  • Replies 17
  • Views 4k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

Left hand drive, that gives him abit more room........

Bonnet not fit?

I dare say you'd be more than £1000 to build something like that if you are getting a subframe fabricated to suit etc.

Then you have to think about the likes of custom driveshafts and exhaust etc etc.

  • Author

Just re read my post and it didn't make sense like I imagined, the subframe was €1000 alone haha :)

I've just been looking into fitting a large gearbox on a short block engine, requires chopping the passenger chassis leg up. Think id have some explaining to do if passengers were injured after a minor accident due to me removing the monocoque crumple zone. Id previously measured it for a tall block and both had to be removed if I wanted to be able to turn right at all..

Id be very interested in knowing how much of the original structure was removed for this, and other tall block engines in these cars. I may still go for a big lump of some sort next year but I've had to postpone my plan to do so yet again whilst I study this issue with there being less than a 31in gap between the chassis legs.

did you nick this picture off my facebook? ha

  • Author

AllDubs uploaded it on facebook and my mate tagged me Jim haha

You can buy subframe kits (company called salzman or something like that). As well as the frame you need other parts of the kit which are designed to replace the bits of chassis leg you need to chop out for the engine/gearbox to fit. Even with this kit its fair from a bolt in conversion and still needs plenty of custom parts like drive shafts ect. For the work involved you would be just as well off chucking the ABF in the bin and a fitting a 20vt, it would be pretty much the same swap

as far as I'm aware salzman are no longer in business and when these kits do pop up for sale they are snapped up straight away and go for very good money. Probably be better off just going all out custom rather than waiting around in the hope of one of these kits coming up. A decent fabricator shouldn't have much issue doing it and if done well the front end would no doubt be stronger than it originally was, these cars really are piss weak

They're stronger than a 106 but yeah. My issue though is I want it to be soft - the engine bay at least. Its softer than the passenger compartment for a reason, if its over strengthened then all the energy in a crash will go straight into the front passenger frame.

I once had a flip front mini, the only thing that had to absorb an impact was a distributor cap.. But with the roads how they are these days, plus my mental age finally reaching double figures, I'm a bit more attentive to it still offering a basic chance in a shunt.

is there a thread /more info anywhere on that car?

Iirc there is a combination of stock shafts and CV joints that'll bolt up to both the polo suspension and an 02X gearbox. Some company makes adapter plates abroad, leaving mounts...

I'm sure an 02M gearbox will fit in a standard polo bay with out chopping the chassis rail, some trimming of the inner wheel well sheet metal would be required but not too much

the 02M boxes are twin layshaft so aren't as long as the 02A and 020 boxes with the single layshaft

when I get my engine and gbox back in I will have a look and take some measurements as my new front chassis rails are the same width as standard polo ones only higher.

The gearbox sits well under them and that's even with the engine raised quite abit for clearance and to fit an under tray.

Yeah I looked at 02M but I couldn't find any with the bolt pattern for the BCB, you could probably use a 6n diesel 085 for a KR or ABF but I don't know how long it would last lol

Also the aux driven water pump is in the way of the os ARB mount, an electric pump or alternatively mounted subframe would be needed.

I did attempt a KR in my coupe several years ago when I had no research and postponed it..

the 02M does match up to the BCB as thats what I'm currently using and I've had them bolted together

there is 5 bolt holes on the casing and 3 1/2 line up

the half will work with a little modification and the 5th hole I'm not sure of as it sits behind the transfer box for the rwd on mine

but tbh 3 or 4 out of 5 should be fine as long as the rest of the engine mounts are adequate enough to hold the engine and box in place in the bay.

if needs be extra brackets can be made to hold them together better. the 5th hole is the one at the rear bottom of the block and there is enough holes down that back part of the block to make a bracket anyway then theres all 5 holes mounted.

or if you wanted the benefits of oil squirters too then the 6 speed AVY out of the Lupo would be perfect

Lupo box was a consideration but will be too short geared for me, and being a bit of an oddball unit I don't know what sources there are to lengthen the gearing.

I just meant the Lupo AVY block and fitting a 1.8 20vt 02M box either 5 or 6 speed

Well I still haven't managed a unit yet but the main problem is gearing. The likes of the Golf or Bora have massive wheels, the unit from my engines donor was up for grabs but a Leon? Massive wheels equals short gearing useless.

Never realised, but the 085 can be found in the longest gearing of any VW box ever. The stronger units introduce entirely new problems.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.