Well I've been collecting parts for my mk2 project that is never going to get finished so it's time to go with that and all the parts. I have no idea of what parts are worth as I bought them a year ago so prices are guidelines please make me an offer. I will post the smaller items can post the bigger ones to but would prefer collection.

So to start of with:

1.3 (mh) bottom end has the metal water pipe attached and sump all internals in good working order very strong engine no smoke or rattles. £60

Abd cylinder head same as the gt heads comes with cam so great upgrade for a normal 1.3 came of a running engine again no smoke or rattles. £60

Abd rocker cover will fit all 3 bolt engines will need cleaning up and painting. £15

Square tooth cam pulley. £10

Abd flywheel bigger than the 1.3 fly not sure if it can be used with a 1.3 starter motor. Will need surface skimming a s rusty. £20

2 1.3 flywheels again both rusty will need skimming £20

1 set of cambelt covers good condition will need a clean but no breaks. £20

Abd inlet and exhaust manifold. £30

1.3 exhaust manifold the single pipe connector type £20

Good mechanical fuel pump. £15.

Thermostats housing the bit that bolts to the head. Has some damage around around the seal area but still sealed with some instant gasket around it canes with thermostat and both temp sensor. £20

2 pairs of drive shafts one set is supposedly g40 ones but can't tell the difference between the two cv boots on one set are good one set they are cracking. £20 a pair.

5 speed rear gear box mounts look in good condition the rubber is not cracked, £15 each.

Good water pump. Slight noise when spun by hand but couldn't hear anything when running. £10

4 speed arb with track control arms in good condition no play in ball joints or bushes. £20

6n 16v exhaust manifold good condition comes with egr valve. £25

GED front brace bar the one that goes across the front of chassis rails. £45. (Sold)

Phil j twin exit back box stainless steel. Slight scrapes and dents underneath but no blows. £65.

Fuel pressure regulator was gunna use for bike carbs but used a t piece instead. £10

Will up date once I look through my shed. Like I say I have no idea what these parts are worth. Make me an offer can do a deal on multiple items and pm for postage costs.

Pictures can be upload if needed.

Edited 11 March, 201412 yr by mattieboi6n

I'd be interested in the G40 Driveshafts, Are they actually any different from standard ones?

They don't look any different tbh I was told they was g40 shafts but I can't be sure I don't know if the cv joints are slighted stonger I can some pics for u tomorrow to see if u can spot anything.

Got any photos of the brace bar?

Will get some tomorrow for u mate.

G40 shafts at the bottom normal shafts at the bottom

Edited 23 November, 201312 yr by mattieboi6n

Needs this stuff gone people message me what u want with anyoffer and see what I say will post most of it if u cover cost

Any pictures of the exhaust, and where are you based ? Cheers

There u go mate

All parts located in bedford

Could I have a picture of the cylinder head and abd inlet and exhaust manifold please

Edited 16 December, 201312 yr by Jamiecoupe

Will get some for you tomorrow mate

have you got a V belt pulley? I need one for my AFH conversion

Is that the smaller design belt that comes on the mk2 polo. If so I'll have a check. I think it is the one I think I may have one. I will let you know

Thats the one yeah

Cheeres

Pictures as requested. Sorry jim but I don't have a pulley will double check at home though

Rocker cover posted for that price?

Hello do you have a carb f

Hello do you have a carb and inlet manifold for sale?

Also got a set of vw 2 brakes from the g40 new discs and pads would like £70 but make me an offer

do you still have the track control arms ??? if so how much posted .??

Pm'd, forgot to ask is the 5speed box for a mk3?

Edited 5 February, 201412 yr by gregb278

Hi where are you ? I'm interested in block and brakes and a fly wheel

do you have the cam shaft cover bolts mate?

hi I'm intrested in breakes inlet and exhasust maifold if still avalable cheers