Skip to content

Smoothing a Car boot (HELP)

Featured Replies

Hello I own a polo 6N2 in black colour code name is black magic (Metallic) I really need to know the steps for smoothing down the boot this includes the back vw badge the polo letters (both stuck on with glue because i repsrayed them purple) and the back windscreen wiper and motor, the last thing I'm considering taking away is the backboot handle and rewiring the wires so I can use the backwindscreen wiper button to pop the boot but I have no clue how to do this and dont think I am going to really so this is a maybe.

I know nothing about doing this all I know is that you got to use filler and the exact colour coded spray paint could someone please put up a step by step guide for me as this would be very helpful thanks alot.

P.S:I have put a picture up of the back of the polo.

post-916028-0-42777400-1398546957_thumb.

  • Replies 6
  • Views 1.6k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

The boot badge will need a circle plate welding in as flush as possible before I light skim of filler, the polo I bought had the boot smoothed by just filling the recess with bodge, needless to say it's cracked all around the edge of the circle so needs doing properly.

The polo badge is just stuck on so can just pull these off without much care if your respraying the whole boot.

The handle is the same as the vw badge, will need a plate welding in and then a skim of filler,

Not really a technical post haha but if you need any more in depth explanation or whatever feel free to ask or pm whatever.

  • Author

Thanks alot Jamie is that all that's needed still a little confused in what equipment I would need

You'll need:

A mig welder.

Sheet metal

Belt sander

Orbital DA sander

Filler

Different grits of sand paper, p40, p80, p180, p240, p600, p1500

A sanding block

High build primer

Base coat (the colour of your car)

Lacquer

A machine polisher and polishing compound

Masking tape

Degreaser

If you have no experience with vehicle body repairs I wouldn't recommend doing it yourself as getting something like this right takes years of practice. With the same money it would cost for all the gear to do it you could just pay a body shop to do it.

Have a go yourself practice makes ? :smile: if you not got welder beg or borrow one same for electric sander etc.

If you do try it yourself I could write out a step by step tutorial for you.

As said above it is quite a hard part to get looking right, may look good until the paint and lacquers on, stand back to admire your handy work n realise it stands out like a sore thumb haha

If you havnt got a welder, ask amongst mates, mates of mates etc and see if you can get anyone to weld the plate on for you, then you do the filler etc, I'm all for giving advice and if you never try, you never learn, worst case scenario is it looks gash but can easy go back and try again, if you need anymore advice or whatever just ask

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.