Hi all, new to this forum and polo's, wondering if anybody has a fuse box diagram for the fuses on top of the battery, cars a 2000 6n2 1.0 mpi. I don't have any small blade fuses fitted in the four slots and I have handbrake light bleeping at me, I have spent most of tonight removing unnecessary wiring for the fog lights on the front and plugged in the factory looks like he should have done in the first place and noticed fuses missing.

Cheers

First Welcome to the forum.

I can't get a picture up at the moment but from left (battery pos end) link 1 110 amp Alternator, Link 2 80 amp Relay carrier/internal fusebox, Link 3 50 amp Glow plugs (engine) Link 4 Glow plugs (rad fan) Small blades from bottom (wires coming from Links) Fuse # 8 10amp AC system, Fuse # 7 20 amp Rad fan, Fuse # 6 30 amp ABS control unit, Fuse # 5 30 amp ABS control unit, Fuse # 9 30 amp AC - Glow plugs (diesel)

I'll try and sort the picture in the morning :)

Thanks for the info, it looks different to my fuse box though are they normally the same? car is a low spec 'e' model I will add a photo of my fuse box so you can see what I mean

Ok you just need to ignore the fuse SA9 in my previous picture, the other fuses are as the picture

Thanks very much, I'm assuming that I should have some fuses in there? I've got no abs warning lights on the dash just the flashing handbrake light which I thought was related to the brake fluid level?

Also my rad fan doesn't come in but I was thinking the car wasn't getting hot enough as I think the thermostat is stuck open

Check there are contacts in the slots and they are clean, then put the, two 30amp, one 20amp & one 10amp in the slots and see what starts to work :)

Thanks for your help, I removed this mess from it last night