Skip to content

The end of my VW Polo mark 2

Featured Replies

Hello all,

My poor old Polo, got diagnosed with a head gasket problem. Basically the cost to fix it and the risk for it to be fixed properly feels a bit to high for me.

It has been good to me but I think it is time to let it go.

I am thinking of scapping it but then I remembered this site, Mark 2's are rare as far as I recall and other than the head gasket it has a lot of potential parts that other mark 2 owners might need.

Any idea of the best way to go about it or should I just scrap it?

  • Replies 15
  • Views 2k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Where you at? If you can't sell it you could pop by a day that I am free with the parts and I'll do it with you so you can learn it? Unless your a girl maybe judging by Kathe? The misses might get a

  • Either head gasket or full engine swap are labour intensive so quite costly (£150?) at a garage. Someone will love and care for it. Post a topic in Forums->Classified Ads->Cars for sale-> P

  • kwijibo_coupe
    kwijibo_coupe

    Whatever you do I wouldn't scrap it. Not only will you get about £10 for it if anything at all. But it is just a waste of a good Polo that can be easily fixed. There will be someone out there that wa

post some pics and a price

Don't give up!

Is it actually head gasket, or is it just condensation in the engine?

In the worst case, there's normally someone selling a used engine, so a swap can be easier than doing the headgasket if you've got a bit of help to drop it out and change it over.

head gasket is actualy pretty easy on these , if you have any keen diy mech that you know they could swap it over

It's not a big job to do the head gasket if you have the skills, tools and confidence. It is important that the head is flat within limits. Get a good quality gasket. A common place for them to leak is where the oil gallery comes up through the block. Is it leaking oil at the front left hand side of the engine above the alternator?

Regards

Phil

Remember these are simple cars. If its a head gasket and you are a very beginner mechanic - believe it or not an engine swap is much easier and probably cheaper then anything else. They just bolt in and out attach and un attach were things are.

  • Author

Unfortunatly I have no mechanical knowledge, or tools.

It is leaking on the left above the alternator though.

And is so weak, struggles on a flat road the poor thing.

It's not a big job to do the head gasket if you have the skills, tools and confidence. It is important that the head is flat within limits. Get a good quality gasket. A common place for them to leak is where the oil gallery comes up through the block. Is it leaking oil at the front left hand side of the engine above the alternator?

Regards

Phil

Either head gasket or full engine swap are labour intensive so quite costly (£150?) at a garage.

Someone will love and care for it.

Post a topic in Forums->Classified Ads->Cars for sale-> Polos

  1. http://www.clubpolo.co.uk/forum/index.php?showforum=74

There's a FAQ for rules on selling such as needs a price. If it does not sell quickly on here (Xmas is a quiet time), list it on eBay and update the ClubPolo ad with a link. Either way pictures will help.

Edited by dvderlm

Whatever you do I wouldn't scrap it. Not only will you get about £10 for it if anything at all. But it is just a waste of a good Polo that can be easily fixed.

There will be someone out there that wants a winter project and your car will be a perfect candidate.

Or even a project for yourself if you decide to get your hands dirty.

As the two above said. While it might not sell immediately often people want a polo project and the problem with your is very minor and cheap for many in the club. ( i appreciate its not everyones forte)

Youll get nothing for scrap and a lot better return selling as is.

If you were to think of keeping it, is it possible you might like to learn a thing or two about maintaining cars? It would save you a fortune and can be really rewarding.

I bought my polo mk2 to learn on. Its not in my nature to do this sort of stuff, but the polo is both simple and rugged with a great community backing it up. I have learnt loads and now easily tackle jobs I wouldn't have dreamed of before.

  • Author

Thanks for the advice,

Will try to sell it, will take some pics on the weekend and post it up.

Where you at? If you can't sell it you could pop by a day that I am free with the parts and I'll do it with you so you can learn it?

Unless your a girl maybe judging by Kathe? The misses might get a bit annoyed [emoji38]

Many MK2s were scrapped due to a failed head gasket, leaking oil onto the alternator (same with 1.3/1.4 Golfs).

Such a shame when it's a day's work for even the novice mechanic, equipped with just a few tools, Haynes manual, new belt/gasket/oil/coolant/pump and a flask of tea.

Back then, they were common. Now, and these fun little cars are getting too scarce to destroy for such reasons.

60 miles of motorway might be a bit much for it, and as i already have three of them, a bit much for my neighbours. But depending on condition it could be a very profitable day's work for someone.

  • Author

Hello,

Sorry for the delay, was hoping for some sun but had to settle with rain. Here are some pics.

https://drive.google.com/folderview?id=0BzVEpljDrEogNEMydXg5ZzNjWW8&usp=sharing

If you guys know where I could maybe get 'Buzz' Fixed by someone who knows what they are doing, the garage I normally go too don't do this type of gasket repair apparently.

Started it up today, shook a bit and then stopped the moment I removed my foot from the accelerator =[

PS: Let me know if the link did not work and I will post them in a different way.

Pics are ok. Ranger roof rails, glass sunroof, rev counter, twin headlamps... all nice to have.

I guess the shake is caused by not all cylinders firing.

That might be the head gasket failure meaning air and fuel is not compressed but leaks out before it can be ignited, or it might be failure to spark, because oil has contaminated the alternator and ignition system requires a good charge after battery depleted by starting.

Cutting out can have all kinds of reasons from damp electrics to carb mounting rubber gasket vacuum leak That might correspond with the lack of power on the flat.

These guys get good reviews and are not far from Burntwood. Make sure you get a VAT inclusive quote and that they will check before doing extra work.

http://www.goodgaragescheme.com/pages/garagefeedback.aspx/4150/Lichfield+Tyres

Top spec model, lots of desirable components, you could make a few hundred quid just selling a few parts.

A scrap yard will most likely just crush it - shame because i'd like the front seat fabric!

Edited by MikeyMK

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.