Skip to content

MK2 Polo Breadvan Van Breaking

Featured Replies

Seems a shame but only had messers, if enough intrest I will be breaking.

all parts can be sent by courier or collection is available from Gloucestershire.

 

image.jpeg

  • Replies 26
  • Views 4.7k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

Shame to break a genuine van :(

Do you have the van bits from the inside?

What's wrong with it?

Sent from my SM-G925F using Tapatalk

  • Author


Mk2 Polo Van, with MOT till Feb.
Not show standard been a good workhorse up till now, fuel tank has been removed for repair has it was leaking since refitting runs badly. 
Weber Carb tuned prior to last MOT 
Heating system components replaced at last Mot
Suspension components replaced last Mot
Alloys wheels fitted.
Faults:
Damaged boot lip from loading and unloading, no boot lock
Exhaust snapped after downpipe
Broken Rear light 
Broken drivers seat belt
poor body work and poor interior
 

fully saveable 

 

kwij you know what to do

  • Author
7 minutes ago, kiran_182 said:

fully saveable 

 

kwij you know what to do

Needs a bit of work but, body works reasonable and engine runs, so all the basics are there. Just had too many messers. 

You should get a buyer on here, I haven't got space for a sitter atm, where are you based in Gloucestershire may I ask?

Sent from my SM-G925F using Tapatalk

How much are you thinking for it whole? 

  • Author
8 minutes ago, Yeti said:

How much are you thinking for it whole? 

No reasonable offer refused, please make an offer if intrested. I have more photos for viewing

 

image.jpeg

3 hours ago, kiran_182 said:

fully saveable 

 

kwij you know what to do

 

I don't have time, got 7 cars at the house just now. No time to do anything with them! 

Can't make out easily from the pics but is the paint original? It looks like oxide red to me?

  • Author
7 hours ago, MartinB said:

Can't make out easily from the pics but is the paint original? It looks like oxide red to me?

Yes all original paint.

  • Author
11 hours ago, Yeti said:

How much are you thinking for it whole? 

 

11 hours ago, Yeti said:

How much are you thinking for it whole? 

Would prefer to sell it complete, will listen to all serious offers.


Mk2 Polo Van, with MOT till Feb.
Not show standard been a good workhorse up till now, fuel tank has been removed for repair has it was leaking since refitting runs badly. 
Weber Carb tuned prior to last MOT 
Heating system components replaced at last Mot
Suspension components replaced last Mot
Alloys wheels fitted.
Faults:
Damaged boot lip from loading and unloading, no boot lock
Exhaust snapped after downpipe
Broken Rear light 
Broken drivers seat belt
poor body work and poor interior

Hi i need two wings a headlight a front bumper and a slam panel? 

  • Author
22 minutes ago, billirving said:

Hi i need two wings a headlight a front bumper and a slam panel? 

thats not a problem, delivery would be best by pallet courier at approx £45, make me an offer on the parts pal. 

 

Edited by Danniysh

What engine does it have?

How much for inlet manifold, carb flange, carb, and airbox?

(basically the whole air intake system from the head up)

Sent from my D5803 using Tapatalk

  • Author
1 hour ago, Slughead91 said:

What engine does it have?

How much for inlet manifold, carb flange, carb, and airbox?

(basically the whole air intake system from the head up)

Sent from my D5803 using Tapatalk

It is the little 1.0LTR. Carb is the webber. I will take an offer on the whole lot, courier will be £10.

2 hours ago, Danniysh said:

It is the little 1.0LTR. Carb is the webber. I will take an offer on the whole lot, courier will be £10.

 

OK thats good,

Do you know which carb flange it has?

The part number should be moulded into the rubber by the carb.  A picture would be good

  • Author
37 minutes ago, Slughead91 said:

 

OK thats good,

Do you know which carb flange it has?

The part number should be moulded into the rubber by the carb.  A picture would be good

 

40 minutes ago, Slughead91 said:

 

OK thats good,

Do you know which carb flange it has?

The part number should be moulded into the rubber by the carb.  A picture would be good

 

CB.jpg

On 02/11/2016 at 18:39, Danniysh said:

No reasonable offer refused, please make an offer if intrested. I have more photos for viewing

 

image.jpeg

 

Need you to give me a clue really, can't make an offer without seeing it in person, and I don't want to make the trip if you're thinking something different to what I would be when I've seen it?

Hi I'm after a lockset ( handles / locks ignition barrel / column , keys ) if still available?

  • Author
7 minutes ago, Yeti said:

 

Need you to give me a clue really, can't make an offer without seeing it in person, and I don't want to make the trip if you're thinking something different to what I would be when I've seen it?

All serious offers from serious buyers considered, £500.

  • Author
8 minutes ago, Nickclifton said:

Hi I'm after a lockset ( handles / locks ignition barrel / column , keys ) if still available?

The ignition barrel is different to the doors, not sure if I have boot lock would need to check.

 

11 hours ago, Danniysh said:

It is the little 1.0LTR. Carb is the webber. I will take an offer on the whole lot, courier will be £10.

OK I don't need as much as I thought, I currently have the Pierburg carb, so would need all the bits between the manifold and airbox

 

Would you do the Flange, Carb and air filter mount bits for £50?

  • Author
9 hours ago, Slughead91 said:

OK I don't need as much as I thought, I currently have the Pierburg carb, so would need all the bits between the manifold and airbox

 

Would you do the Flange, Carb and air filter mount bits for £50?

PM ME

 

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.