I have a 2001 Polo Estate and was wanting to install some foglights in the front, I know some caddys with the same front came with them and seats, etc. So I was wondering if I could wire the foglights into the factory wiring? The car has rear fog lights and a 6N2 interior so I was wondering if there's any way to tap into that wiring? Any help would be much appreciated 

You might be lucky and find there is already the wiring tied up behind the bumper for the fog lights, if it has then you'll just need to replace the main light switch with one that has the front & rear fog light positions,  I had a 2001 Ibiza which is a derivative of yours, (it's a re-badged Seat Cordoba), there wasn't any wiring, so I run a wire from the engine bay to the light switch connector and fitted the correct switch for front & rear fogs

On 3/26/2017 at 13:04, nige8021 said:

You might be lucky and find there is already the wiring tied up behind the bumper for the fog lights, if it has then you'll just need to replace the main light switch with one that has the front & rear fog light positions,  I had a 2001 Ibiza which is a derivative of yours, (it's a re-badged Seat Cordoba), there wasn't any wiring, so I run a wire from the engine bay to the light switch connector and fitted the correct switch for front & rear fogs

Okay thanks, I'll have a look soon. Would I need a new switch if it already has fogs on the switch?

The best way is to have the correct switch so on the first pull on the light switch you get the front fogs on, then the second pull you have front & rear fogs on   

 

If you have a look at the connector for the headlight switch, Pin 8 White/Yellow wire is the front fog & Pin 9 Grey/Green wire is the rear fog